Dependable Machine Company
Dependable Machine Company
Norman J. Gallivan, Inc. | Indianapolis, IN 46218
Date(s) :  6/19/2024 - 6/25/2024
Buyer Premium :  18%


Online Only Auction
BIDDING LIVE JUNE 19TH THROUGH JUNE 25TH WITH LOT 1 ENDING AT 1PM EST WITH A 2 MINUTE SOFT CLOSE! 30 SECOND CLOSING BETWEEN LOTS
GALLIVAN IS PLEASED TO OFFER THE ASSETS OF DEPENDABLE MACHINE CPMPANY IN INDIANAPOLIS, IN. THIS SALE INCLUDES WELL MAINTAINED CNC TURNING CENTERS, VERTICAL MILLS, BAND SAW, LATHES, SURFACE GRINDERS, COMPRESSORS, AND MORE. THERE IS A LARGE AMOUNT OF NEW AND USED TOOLING, TOOL HOLDERS, CAT40 TOOL HOLDERS, AS WELL AS PRECISION MEASURING TOOLS.
1 SHOP FAN, TEMPA CURE, 42"
2 SHOP FAN, COMMERCIAL ELECTRIC, 24"
3 GROUP OF (2) SHOP FANS, DAYTON, 18"
4 GROUP OF (2) VARIOUS SHOP FANS
5 GROUP OF VARIOUS PLYWOOD, DRYWALL, TRIM, ETC.
6 GROUP OF VARIOUS LIFTING STRAPS, CHAINS, AND COME
ALONG
7 GROUP OF VARIOUS PARTS
8 GROUP OF (2) HAND TRUCKS
9 FORMANS DESK, GLOBAL
10 PALLET JACK, VESTIL, 5,500 LBS CAP.
11 BANDING CART, W/ TOOLING
12 PARTIAL 55 GAL. DRUM OF USED HYDRAULIC OIL,
WALLOVER, WOCO AW32,
13 PARTIAL 55 GAL. DRUM OF RUST PROTECTION,
WALLOVER, WOCOTEC 3212
14 GROUP OF VARIOUS SOLVENTS TO INCLUDE BUT NOT
LIMITED TO TURBINE ENGINE OIL, RUST PREVENTION, CORROSIVE PREVENTION, ETC.
15 SHIPPING TABLE, 8', W/ CONTENTS TO INCLUDE BUT
NOT LIMITED TO VARIOUS SHIPPING SUPPLIES, BOXES, SCALE, ETC.
16 SHIPPING TABLE, 6', WOOD, W/ VARIOUS SHIPPING
SUPPLIES TO INCLUDE BUT NOT LIMITED TO GIFT BOXES, STAYFLATS, ORGINIZERS, ETC.
17 TWO DOOR CABINET, W/ CONTENTS TO INCLUDE BUT NOT
LIMITED TO POLY BAGS AND STAYFLATS
18 TWO DOOR CABINET, W/ CONTENTS TO INCLUDE BUT NOT
LIMITED TO DISH SOAP, INK REMOVER, THERMAL TRANSFER RIBBON, TAPE, ETC.
19 SEALER, ULINE, 20" IMPULSE SEALER
20 PORTABLE A/C UNIT, FRIGIDAIRE, MDL FHPC082AB10
21 TABLE, W/ TWO CHAIRS
22 GROUP OF (2) ROLLING CARTS, PLASTIC
23 GROUP OF KEURIG COFFEE MAKER AND SUNBEAM
MICROWAVE
24 ROLLING BUFFET W/ DRAWERS
25 REFRIGERATOR, WHIRLPOOL
26 WATER COOLER, GLACIER BAY, W/ COOLERS
27 TOASTER OVEN, BLACK AND DECKER, W/ TABLE
28 TABLE, W/ (6) CHAIRS
29 GROUP OF (4) SHIPPING PAPER DISPENSERS, W/ PAPER
30 SHIPPING TABLE, 6', W/ SHELF
31 PARTS WASHER, CAROLINA, MDL CPW30, 30 GAL.
32 GROUP OF FOAM POUCHES, BUBBLE WRAP AND BUBBLE
BAGS
33 GROUP OF VARIOUS GO/NO GO GAGE AND THREAD RING
GAGES
34 GROUP OF VARIOUS GO/NO GO GAGES
35 PRESS GAUGE
36 GROUP OF (2) PARTIAL PIN GAGE SETS, (1)
.626-.750; (1) .501-.625
37 TAPE READER, OKUMA, MDL MC40
38 DIE PRESS, SUPERIOR
39 GROUP OF VARIOUS TOOLING TO INCLUDE BUT NOT
LIMITED TO THREAD RINGS, GO/ NO GO, COLLETS, INSPECTION GAUGES, ETC.
40 GROUP OF VARIOUS SHIPPING SUPPLIES TO INCLUDE BUT
NOT LIMITED TO BOXES, GIFT BOXES, BUBBLE WRAP, FOAM, PLASTIC CAPS, ETC.; W/ TWO DOOR CABINET
41 GROUP OF VARIOUS FATIGUE MATS
42 DOT PEEN MARKING MACHINE, TECHNOMARK, MDL MULTI4
120, SER# 2211047, 2022, W/ STAND
43 DOT PEEN MARKING MACHINE, DAPRA PRYOR, MDL
MARKTRONIC MULTIDOT 2068, 2001, W/ CART
44 LABEL PRINTER, THARO, MDL H-400
45 ROLLING CART, W/ VARIOUS PARTS
46 PORTABLE A/C UNIT, LG, MDL LP1220GSR
47 MINI FRIDGE, EMERSON, MDLCR510VSE/CR510BSSE
48 BUFFET, W/ DRAWERS
49 U-SHAPED DESK, W/ BOOK SHELVES, COMPUTER CHAIR,
(2) CHAIRS, MONITOR, KEYBOARD
50 DUMP HOPPER, GAL FAB, 1-1/2 CU. YD.
51 ELECTRONIC HEIGHT GAGE, SYLVAC, MDL HI-CAL 300,
SER# 4184, 12"/ 300MM, BLUETOOTH
52 HEIGHT GAGE, MITUTOYO, MDL HDF-18"N, 18"
53 HEIGHT GAGE, MITUTOYO, MDL HDS-18"SC, 18"
54 HEIGHT GAGE, STARRETT, 15", W/ MITUTOYO MDL
SJ-201 SURFACE ROUGHNESS TESTER
55 HEIGHT GAGE, FOWLER, 24"
56 HEIGHT GAGE, FOWLER, 18"
57 HEIGHT GAGE, MITUTOYO, MDL 515-310
58 HEIGHT GAGE, MITUTOYO, 18"
59 GROUP OF (2) OUTSIDE MICROMETER, 6-7"
60 GROUP OF (8) OUTSIDE MICROMETERS, MITUTOYO, 4-5"
TO 11-12"
61 GROUP OF (5) OUTISDE MICROMETERS, VARIOUS,
10-11", 11-12", 13-14", 14-15", 15-16"
62 GROUP OF (8) OUTSIDE MIRCROMETERS, MITUTOYO,
2-3", (2) 3-4", (2) 4-5", 5-6", 7-8", 12-13"
63 GROUP OF (7) OUTSIDE MICROMETERS, VARIOUS, 5-6",
(2) 6-7", (2) 7-8", 9=10", 11-12"
64 FLAT OF VARIOUS OUTSIDE MICROMETERS
65 FLAT OF VARIOUS OUTSIDE MICROMETERS AND DIGITAL
MIRCROMETERS
66 FLAT OF VARIOUS OUTSIDE MICROMETERS
67 FLAT OF VARIOUS DIAL BORE GAGES
68 FLAT OF VARIOUS DIAL BORE GAGES
69 FLAT OF VARIOUS DROP INDICATORS
70 FLAT OF VARIOUS BORE GAGES
71 FLAT OF VARIOUS MICROSURF PLATES, SPI
72 FLAT OF VARIOUS DEPTH GAGES AND MICROMETERS
73 FLAT OF VARIOUS GAGES AND INDICATORS
74 FLAT OF VARIOUS BORE GAGES, MICROMETER, MAGANETIC
FIELD INDICATOR, ETC.
75 CALIPER, BROWN & SHARPE, 49"
76 CALIPER, BROWN & SHARPE, 37"
77 HEIGHT GAGE STAND, FRENCO, 12"
78 PARTIAL PIN GAGE SET, MEYER, .011-.250",
.251-.500", .501-.625", .626-.750"
79 GROUP OF (2) PARTIAL PIN GAGE SETS, (1)
.061-.250", (1) .251-500"
80 VISION SYSTEM CAMERA, COGNEX, INSIGHT, MDL 5100
81 GROUP OF (2) PARTIAL PIN GAGE SETS, (1)
.061-250", (1) .251-.500"
82 FLAT OF VARIOUS DIAL SNAP GAGES
83 GROUP OF (2) PLUG GAGE SETS, DELTRONIC TENTH,
.4880-.5120"
84 GROUP OF (2) PLUG GAGE SETS, DELTRONIC TENTH, (1)
.8630-8760", (1) .9988-1.0012"
85 GROUP OF (2) PLUG GAGE SETS, DELTRONIC TENTH, (1)
.6755-.6995", (1) .7488-.7512"
86 DIGITAL BLADE MICROMETER, MITUTOYO, 1-2"
87 DIGITAL BLADE MICROMETER, MITUTOYO, 2-3"
88 DIGITAL BLADE MICROMETER, MITUTOYO, 3-4"
89 DIGITAL BLADE MICROMETER, MITUTOYO, 4-5"
90 DIGITAL BLADE MICROMETER, MITUTOYO, 5-6"
91 DIGITAL CALIPER, FOWLER, 24"
92 OUTSIDE MICROMETER, MITUTOYO, 18-24"
93 PARTIAL GAGE BLOCK SET, MITUTOYO, .050-4"
94 PARTIAL GAGE BLOCK SET, DOALL, .050-3"
95 PARTIAL GAGE BLOCK SET, MITUTOYO, .050-4"
96 PARTIAL GAGE BLOCK SET, MITUTOYO, .050-4"
97 PARTIAL GAGE BLOCK SET, VARIOUS, 6-8", 10", 12"
98 PARTIAL GAGE BLOCK SET, HOKE, .010-.090"
99 PARTIAL GAGE BLOCK SET, 1.001-100MM
100 PARTIAL WEAR GAGE BLOCK SET, BROWN & SHARPE,
.100075 - 4"
101 PARTIAL GAGE BLOCK SET, MITUTOYO, 5"-12"
102 PARTIAL GAGE BLOCK SET, MITUTOYO, .050-3"
103 PARTIAL GAGE BLOCK SET, MITUTOYO, .5"-12"
104 SNAP GAGE, MITUTOYO
105 RING GAGE, DIATEST, .031-.039"
106 PISTOL GRIP THREE POINT BORE GAGE, INSIZE
107 RING GAGE, DIATEST, .011-.018"
108 BLADE MICROMETER, FOWLER, 3-4"
109 DIGITAL BORE GAGE, MITUTOYO
110 INSIDE MICROMETER SET, 4-40"
111 DIRECT READING BENCH MICROMETER, STARRETT, MDL
673
112 BORE DIAL GAGE, MITUTOYO, MDL 536-176
113 STANDARD SET, MITUTOYO, (5) PIECE, 1-5"
114 BLADE MICROMETER, MITUTOYO, 1-2"
115 THREAD MEASURING WIRE SET, SIZE CONTROL COMPANY,
.018030-.048123"
116 BORE SCOPE, EVEREST VIT, MDL ELSV-24
117 SNAP GAGE, FEDERAL, MDL 301P-8
118 SNAP GAGE, FEDERAL
119 OUTSIDE MICROMETER, MITUTOYO, 12-18"
120 INDICATOR, MITUTOYO, DIGIMATIC, .0001-.5"
121 FLAT OF PRECISION RINGS
122 GROOVE MICROMETER, MITUTOYO, 0-1"
123 MICROMETER, FOWLER, 0-1"
124 CAMFER MICROMETER GAGE, ACME
125 CAMFER MICROMETER
126 BLADE MICROMETER, FOWLER, 1-2"
127 ROUGHNESS GAGE, AIRTRONICS, MDL 18031
128 CALIPER, FOWLER, 24"
129 STANDARD SET, MITUTOYO, 1-11"
130 LIVE CENTER, SKODA, MDL 5M1 7-N-1
131 DIAL BORE GAGE, MITUTOYO, MDL 511-104.7
132 FLAT TO INCLUDE BUT NOT LIMITED TO MICRORISERS,
STANDARDS, PRECISION RINGS, ETC.
133 GROUP OF (2) DIAL BORE GAGES
134 HEIGHT GAGE, MITUTOYO, 12"
135 GROUP OF (3) MAUSER GAGES
136 ID/OD COMPARATOR, MAHR, MDL EMD-36B19D
137 ID/OD COMPARATOR, MAHR, MDL EMD-36B19D
138 HEIGHT GAGE, DOALL, MDL DHM-B, 12"
139 RISER BLOCK, MITUTOYO
140 FLAT OF VARIOUS GAGE BLOCKS AND PIN GAGES
141 GROOVE GAGE, STARRETT, MDL 1175
142 ELECTRONIC GAGE, MERZ
143 DIAL INDICATOR, FECHLOC
144 FLAT OF VARIOUS BLOCKS
145 FLAT OF SWING GAGES, FEDERAL
146 FLAT OF SWING GAGES, STANDARD
147 SWING GAGE, FEDERAL, MR-101
148 REFRACTOMETER, WESTOVER, MDL RHB-10ATC
149 FLAT OF BLOCKS, SWIVEL, VISE, ETC.
150 GROUP OF (2) 90 DEG. ANGLE BLOCKS
151 ADJUSTABLE VISE, 3"
152 BENCH CENTER, BARBER COLEMAN, MDL BC-100
153 CABINET AND SHELF, W/ CONTENTS, TO INCLUDE BUT
NOT LIMITED TO INSPECTION TAGS, SURFACE PLATE CLEANER, ETC.
154 GRANITE SURFACE PLATE, 6'X3'X1', 0.000580", W/
STAND
155 OSCILLASCOPE, STARRETT, MDL HE400, SER# ST18022C,
110V, W/ ROLLING BASE
156 CMM, MITUTOYO, MDL CRYSTA-APEX S574, SER#
81371127, 2017, W/ RENISHAW PH10M; TP20 PROBE; RENISHAW MCR20; COMPUTER AND MONITORS; KEY; AND MORE
157 THREE PIECE DESK SET, W/ COMPUTER CHAIR; DOES NOT
INCLUDE COMPUTER OR MONITORS
158 SKID OF WALL A/C UNIT, PEG BOARD, FLOORING
159 SKID OF LED LIGHTS
160 GROUP OF VARIOUS LONG HANDLED TOOLS
161 STEP LADDER, ALUMINUM, 6' WORKING HEIGHT
162 STEP LADDER, WERENER, FIBERGLASS, 6'
163 STEP LADDER, WERNER, ALUMINUM, 4'
164 GRANITE SURFACE PLATE, 2'X18"X3-1/2", 0.0002"
165 GRANITE SURFACE PLATE, 2'X18"X4", 0.00006"
166 GRANITE SURFACE PLATE, 18"X12"X3-1/2", 0.00002", Quantity: x2
0.00004"; TIMES THE BID
167 GRANITE SURFACE PLATE, 2'X18"X4", 0.0001", W/
CABINET
168 GRANITE SURFACE PLATE, 4'X34"X8", W/ CART
169 GRANITE SURFACE PLATE, 3'X2'X6", 0.00016; W/ CART
170 GRANITE SURFACE PLATE, 2'X18"X3", 0.00014
171 GRANITE SURFACE PLATE, 2'X18"X4", 0.00011
172 GRANITE SURFACE PLATE, 2'X18"X4", 0.00008
173 GROUP OF (4) VARIOUS WHEEL BARROWS
174 GROUP OF (3) VARIOUS WHEEL BARROWS
175 GRANITE SURFACE PLATE, 30"X24"X5", 0.00004"
176 VERTICAL MACHINING CENTER, DOOSAN, MDL DNM
200/5AX, SER# MV0083-000130, 329 CUT HOURS, POWER ON TIME 3,332 HRS, 2020, 5 AXIS, DOOSAN FANUC I-SERIES CONTROLS, 40 TOOL CHANGER, HYDRAULIC COOLER; STR-200 SAM CHULLEY ROTARY TABLE; W/ LNS TURBO HB MDL 57519134 CHIP CONVEYOR
177 VERTICAL MACHINING CENTER, DOOSAN, MDL DNM-5700,
SER# MV0091-002787, 1,193 CUT HOURS, POWER ON TIME 1,193 HRS., 2019, DOOSAN FANUC I-SERIES CONTROLS, 30 TOOL CHANGER, HYDRAULIC COOLER; GXA-210S ROTARY TABLE, RENISHAW OTS, W/ LNS TURBO HB MDL 57519001 CHIP CONVEYOR
177a GROUP OF LIVE TOOLING WRENCHES
178 GROUP OF (4) NEW CAT40 TOOL HOLDER, CAT40-ER11
1-4"
179 GROUP OF (5) CAT40 TOOL HOLDERS, ER20-70, (2)
ER16-70, ER20-2.76, ER25-70
180 GROUP OF (5) CAT40 TOOL HOLDERS, ER32-70,
DA20830, ER10-70, ER16-70, ER20-2.76
181 GROUP OF (5) CAT40 TOOL HOLDER, SLN 1/8"-2-3/8",
V40CT-E37, SLN 3/16-2-1/2", SLN 1/4-21/2", ER32-70
182 GROUP OF (5) CAT40 TOOL HOLDERS, ER40-3.15", (2)
TG75-2.75"
183 GROUP OF (5) CAT40 TOOL HOLDERS, TG75-2.75"
184 GROUP OF (5) CAT40 TOOL HOLDERS, (5) TG75-3",
185 GROUP OF (5) CAT40 TOOL HOLDERS, (5) TG75-3"
186 GROUP OF (5) CAT40 TOOL HOLDERS, CT40X1-2, SLN
1/2-4.63, TG75-3"
187 GROUP OF (5) CAT40 TOOL HOLDERS, SLN1/8-2-3/8",
CAT40 3/8-2-1/2", CAT40 MT3
188 GROUP OF (5) CAT40 TOOL HOLDERS, ER20-4, ER20-70,
ER16-70
189 GROUP OF (5) CAT40 TOOL HOLDERS, TG75-2.75",
ER25-4, CT-S75-150
190 GROUP OF (5) CAT40 TOOL HOLDERS, ER16-70,
ER16-100, ER20-70, ER16-4, ER20-70
191 GROUP OF (4) CAT40 TOOL HOLDERS, ER16-6", ER16-4"
192 GROUP OF (5) CAT40 TOOL HOLDERS, ER16-3",
ER16-4", TG35-3"
193 GROUP OF (4) CAT40 TOOL HOLDERS, ER16-5",
ER16-100, ER16-4"
194 GROUP OF (5) CAT40 TOOL HOLDERS, ER0X4, ER32-70,
ER20-4"
195 OPTICAL PROBE, RENISHAW, MDL OMP60, W/
CALLABRATION RING, 1.99999"
196 GROUP OF (2) TOOL CHANGERS PARTS, FUDOW
197 GROUP OF (5) CAT40 TOOL HOLDER, TG75-2-3/5", SLN
1/2-4.63", APU1/2", MT3, TG100300 1/86
198 GROUP OF (5) CAT40 TOOL HOLDERS, ER32-70,
VC06-4", TG75-3", 51 1/4 85U
199 GROUP OF (5) CAT40 TOOL HOLDERS, SBL6-6", SBL6-4"
200 GROUP OF (5) CAT40 TOOL HOLDERS, ER25-4",
ER11M-8", C7/8-1200, ER16-100
201 GROUP OF (5) CAT40 TOOL HOLDERS, ER20-4",
DC06-6", SBL6-3"
202 GROUP OF (5) CAT40 TOOL HOLDERS, DCO6-6",
TG75-2.75, ER20-4", ER32-2.76",
203 GROUP OF (5) CAT40 TOOL HOLDERS, TG75-3"
204 GROUP OF (5) CAT40 TOOL HOLDERS, ER20-6",
ER25-6", TG75-3", C4007-0032-3.13
205 GROUP OF (6) CAT40 TOOL HOLDERS, ER40-4", TG75-3"
206 GROUP OF (5) CAT40 TOOL HOLDERS, ER25-6",
ER20-70, TG75-2.75"
207 GROUP OF (5) CAT40 TOOL HOLDERS, ER25-70, CF4-L,
1/2-2,50", FMA3/4-1.37"
208 GROUP OF (5) CAT40 TOOL HOLDERS, 1/8-5/8",
1/2-2.50", 3/4-3"
209 CAT40 TOOL CART
210 CAT40 TOOL CART
211 GROUP OF (2) CAT40 STORAGE RACKS, HUOT
212 GROUP OF (2) CAT40 STORAGE RACKS, HUOT
213 CNC TURNING CENTER LATHE, DOOSAN, MDL LYNX
2100LSYB, SER# MDL0406-000385, 509 CUT HOURS, POWER ON TIME 4,049 HRS., 12/19, 3 PHASE, DOOSAN FANUC CONTROLS, 24 LIVE TOOL, SAM CHULLEY MH208BVI PASS THROUGH 3 JAW CHUCK, SAM CHULLEY HSOS; W/ LNS TURBO HB MDL 57519015 CHIP CONVEYOR
213a LIVE TOOL HOLDER, EPPINGER, PRECI-FLEX,
REF# 850418-00441, I=1:1, L1=65.007, NMAX=6000
213b LIVE TOOL HOLDER, EPPINGER, PRECI-FLEX,
REF# 101601-00003A, I=1:1, L1=85.00, NMAX=6000
213c LIVE TOOL HOLDER, EPPINGER, PRECI-FLEX,
REF# R78831B, I=1:1, NMAX=6000
213d LIVE TOOL HOLDER, EPPINGER, PRECI-FLEX,
REF# R78831B, I=1:1, NMAX=6000
213e GROUP OF VARIOUS DOOSAN TOOL BLOCKS
213f GROUP OF VARIOUS DOOSAN TOOL BLOCKS
214 CNC LATHE, OKUMA, MDL GENOS L400, SER#P1765,
2016, OKUMA OSP-P300L-R CONTROLS, KITAGAWA B-208 3 JAW CHUCK, 12 TOOL TURRET, W/ CHIP CONVEYOR; TRANSFORMER
215 CNC LATHE, OKUMA, MDL IMPACT LU15, SER# 0268, 3
PHASE, OKUMA CONTROLS, KITAGAWA B-208 3 JAW CHUCK, (1) 12 TOOL TURRET & (1) 8 TOOL TURRET, W/ JORGENSEN CHIP CONVEYOR (2019); TRANSFORMER
216 CNC LATHE, OKUMA, MDL CAPTAIN-L370, SER# 528379,
2010, OKUMA OSP-P200L CONTROLS, 3 PHASE, KITAGAWA B-208 3 JAW CHUCK, 12 TOOL TURRET, W/ HENNING KMM-1304-03 CHIP CONVEYOR; TRANSFORMER
217 CNC LATHE, OKUMA, MDL CADET LNC-8C, SER#
0706C977, OKUMA CONTROLS, KITAGAWA B-10 3 JAW CHUCK, 12 TOOL TURRET, W/ HENNIG MDL 100105 CHIP CONVEYOR 1995; TRANSFORMER
218 CNC LATHE, OKUMA, MDL CADET LNC-8C, SER#
0707C949, OKUMA CONTROLS, KITAGAWA B-10 3 JAW CHUCK, 12 TOOL TURRET; W/ HENNIG MDL 100105 CHIP CONVEYOR 1995; TRANSFORMER
219 CNC LATHE, OKUMA, MDL LB-15, SER# 01019270,
KITAGAWA B-08 3 JAW CHUCK,12 TOOL TURRET, OKUMA CONTROLS; W/ HENNIG CHIP CONVEYOR, 1989
220 NON-WORKING CNC LATHE, OKUMA, MDL LB15, SER#
60113046, OKUMA CONTROLS, 3 PHASE, KITAGAWA B-08 3 JAW CHUCK,12 TOOL TURRET; W/ ENOMOTO EC-27 CHIP CONVEYOR, 12 TOOL TURRET,
221 MACHINE VISE, KURT, 6"
222 MACHINE VISE, KURT, 6"
223 MACHINE VISE, KURT, 6"
224 MACHINE VISE, KURT, 6"
225 OPEN CENTER 3 JAW POWER CHUCK, KITAGAWA, MDL
B-210, 10"
226 3 JAW CHUCK, 8"
227 3 JAW SELF CENTERING CHUCK, AUTO STRONG, MDL
SK-7, 7.5"
228 HORIZONTAL VERTICAL 5C COLLET INDEXER, HARDINGE,
MDL 4N-5C
229 TOOL HOLDER
230 HORIZONTAL VERTICAL 5C COLLET INDEXER, HARDINGE,
MDL 4N-5C
231 GROUP OF (2) VISES, (1) 4"; (1) 3"
232 GROUP OF (2) FLATS OF MACHINE TIE DOWNS AND
HARDWARE
233 FLAT OF INDEXABLE TOOL HOLDERS
234 FLAT OF INDEXABLE TOOL HOLDERS
235 FLAT OF INDEXABLE TOOL HOLDERS
236 FLAT OF INDEXABLE TOOL HOLDERS
237 FLAT OF INDEXABLE TOOL HOLDERS
238 FLAT OF INDEXABLE TOOL HOLDERS
239 FLAT OF INDEXABLE TOOL HOLDERS
240 FLAT OF INDEXABLE TOOL HOLDERS
241 FLAT OF INDEXABLE TOOL HOLDERS
242 FLAT OF INDEXABLE TOOL HOLDERS
243 FLAT OF INDEXABLE TOOL HOLDERS
244 FLAT OF INDEXABLE TOOL HOLDERS
245 FLAT OF INDEXABLE TOOL HOLDERS
246 FLAT OF TURNING INSERTS
247 FLAT OF GROOVE INSERTS
248 FLAT OF DRILL INSERTS
249 FLAT OF DRILL INSERTS
250 FLAT OF DRILL INSERTS
251 FLAT OF DRILL INSERTS
252 FLAT OF GROOVE INSERTS
253 FLAT OF GROOVE INSERTS
254 FLAT OF GROOVE INSERTS
255 FLAT OF GROOVE INSERTS
256 FLAT OF INDEXABLE CUTTOFF BLADES
257 FLAT OF THREADING INSERTS
258 FLAT OF GROOVE INSERTS
259 FLAT OF GROOVE INSERTS
260 FLAT OF VARIOUS INSERTS
261 FLAT OF VARIOUS INSERTS
262 FLAT OF VARIOUS INSERTS
263 FLAT OF VARIOUS INSERTS
264 FLAT OF VARIOUS BORING BARS
265 FLAT OF VARIOUS BORING BARS
266 FLAT OF VARIOUS BORING BARS
267 FLAT OF VARIOUS BORING BARS
268 FLAT OF VARIOUS BORING BARS
269 FLAT OF VARIOUS BORING BARS
270 FLAT OF VARIOUS BORING BARS
271 FLAT OF VARIOUS SLEEVES
272 FLAT OF VARIOUS SLEEVES
273 FLAT OF VARIOUS SLEEVES
274 FLAT OF VARIOUS SLEEVES
275 FLAT OF (5) VARIOUS DRILLS, 2.5", 2.125, (2) 2",
1.5"
276 FLAT OF VARIOUS DRILLS AND TOOL HOLDERS
277 FLAT OF VARIOUS DRILLS, (2) 1.75", (2) 1.5", (3)
1", 1.25"
278 FLAT OF VARIOUS BORING BARS
279 FLAT OF VARIOUS DRILLS
280 FLAT OF VARIOUS BORING BARS
281 FLAT OF VARIOUS BORING BARS
282 FLAT OF VARIOUS SLEEVES
283 FLAT OF VARIOUS SLEEVES
284 FLAT OF VARIOUS SLEEVES
285 INDEXABLE BORING BAR, KENNAMETAL, MDL A24UMWLNR4, Quantity: x3
DIA 1.5", L 14", TIMES THE BID
286 FLAT OF VARIOUS SLEEVES
287 FLAT OF VARIOUS SLEEVES
288 FLAT OF (5) VARIOUS DRILLS, (3) 2.5", (1)
2.48-2.60, (2) 2.75"
289 FLAT OF VARIOUS DRILLS
290 FLAT OF KENNAMETAL TOOL HOLDERS
291 FLAT OF VARIOUS KENNAMETAL BORING BARS
292 TAIL STOCK, ELLISON, MDL ST210T, 2019
293 QUICK CHANGE FIXTURE, JERGENS, FIXTURE PRO, 70 NM
294 OPTICAL PROBE, RENISHAW, MDL RMP600
295 GROUP OF (4) CAT40 TOOL HOLDERS, ER16-5",
16R-5.2", ER4.5, ER11M-6"
296 GROUP OF (4) CAT40 TOOL HOLDERS, ER20-4",
ER16-4", ER16-5"
297 FLAT OF VARIOUS USED MACHINING BITS
298 FLAT OF VARIOUS USED MACHINING BITS AND REAMERS
299 FLAT OF VARIOUS MACHINING BITS AND INSERTS
300 FLAT OF VARIOUS INDEXABLE TOOL HOLDERS, DRILLS,
TOOLS HOLDERS, ETC.
301 FLAT OF VARIOUS TIE DOWN HARDWARE
302 GROUP OF VARIOUS MACHINING BITS AND COLLETS
303 GROUP OF VARIOUS COLLETS
304 GROUP OF VARIOUS COLLETS
305 GROUP OF VARIOUS COLLETS
306 GROUP OF VARIOUS END MILLS
307 GROUP OF VARIOUS DRILLS AND REAMERS
308 GROUP OF VARIOUS DRILLS AND END MILLS
309 GROUP OF VARIOUS DRILLS
310 GROUP OF VARIOUS DRILLS
311 GROUP OF VARIOUS DRILLS
312 GROUP OF REAMERS, COUNTER SINKS, CENTER DRILLS,
END MILLS
313 GROUP OF VARIOUS TAPS
314 GROUP OF VARIOUS END MILLS, SPADE DRILLS, CARBIDE
DRILLS
315 GROUP OF VARIOUS REAMERS
316 GROUP OF VARIOUS MICRO DRILLS, MICRO REAMERS
317 GROUP OF VARIOUS FRACTION DRILLS
318 GROUP OF VARIOUS NUMBER DRILLS
319 GROUP OF VARIOUS LETTER DRILLS
320 GROUP OF VARIOUS SHIMS
321 GROUP OF VARIOUS DAMAGED TOOL HOLDERS
322 GROUP OF OLD INSERTS
323 GROUP OF VARIOUS TURRET TOOL BLOCKS
324 GROUP OF VARIOUS TURRET TOOL BLOCKS
325 GROUP OF VARIOUS TURRET TOOL BLOCKS
326 GROUP OF VARIOUS TURRET TOOL BLOCKS
327 GROUP OF VARIOUS TURRET TOOL BLOCKS
328 GROUP OF LIVE CENTERS AND CHUCKS
329 AIR COMPRESSOR, KAISHAN, MDL KRSD-20-115, SER#
152002822U, 20HP, 2020, 10,064 HRS. RUN TIME, W/ QUINCEY AIR DRYER, MDL QPHT75; 80 GAL. HOLDING TANK
330 SHIPPING SCALE, FAIRBANKS, MDL FB2200, W/ 4'X4'
PLATE
331 AUTOMATIC HORIZONTAL BAND SAW, DOALL, CONTINENTAL
SERIES, MDL DC-330NC, SER# 100431, HYDRAULIC CLAMP INFEED, W/ 84" ROLLER CONVEYOR
332 VAN, CHEVROLET, EXPRESS 1500,
VIN#1GCSGAFX9D1125836, 2013, V6, AUTO TRANS, 100,570 MILES, AC/HEAT, CD PLAYER
333 FORKLIFT, YALE, MDL GLP050LXNVAE087, SER#
A974V03181L, 5,335 HRS, 5,000 LBS. CAP., SIDE SHIFT, 3 STAGE, LP; DOES NOT INCLUDE TANK. FORKLIFT CANNOT BE REMOVED BEFORE TUESDAY JULY 2ND AT 12PM!
334 AIR COMPRESSOR, SAYLOR-BEALL, MDL 735-6, SER#
5-136-188, 5HP., 3 PHASE
335 HORIZONTAL BANDSAW, WELLS, MDL 5M, ON CASTERS
336 ELECTRO CHEMICAL MARKER, MARKING METHODS, MDL
MARK 300; W/ BROTHER TYPE WRITER AND STAND
337 SAND BLAST CABINET, TRINCO, DRY BLAST, MDL 36/BP,
SER# 79898-20, 2 HOLE
338 VERTICAL MILL, BRIDGEPORT, SERIES I, 2HP., SER#
243822, 3 PHASE
339 VERTICAL MILL, BRIDGEPORT, SERIES I, 1HP.,
SER#100100, 3 PHASE
340 VERTICAL MILL, BRIDGEPORT, SERIES I, 2HP., SER#
243799, 3PHASE MITUTOYO MDL GML-3701W
341 DOUBLE ENDED POLISHER, STANLEY, 1 HP
342 HORIZONTAL VERTICAL COLLET INDEXER, HARDINGE, MDL
4N-5C
343 HORIZONTAL VERTICAL COLLET INDEXER, HARDINGE, MDL
HV-4N
344 HORIZONTAL VERTICAL COLLET INDEXER, UNKNOWN
345 HORIZONTAL VERTICAL COLLET INDEXER, YUASA
346 TURRET DRILL, BURGMASTER, 6 CHUCK, SER# 2220
347 CABINET, 36"X21"X80", W/ MISC. CONTENTS
348 HONING MACHINE, SUNNEN, MDL MBB-1660, SER# 92866,
W/ HONES & CABINET
349 SURFACE GRINDER, ACC OKAMOTO, 12-24DX, MDL
ACC-12-24DX, SER# 63840, 3 PHASE
350 SURFACE GRINDER, ACC OKAMOTO, MDL ACC-6-18DX3,
SER# 45140, NON-WORKING
351 LATHE, CINCINNATI, MDL 15 HYDRA SHIFT, 15X54, 3
PHASE, TAIL STOCK, CENTER RING
352 LATHE, HARDINGE, MDL HC, SUPER PRECISION, 3 PHASE
353 LATHE, HARDINGE, MDL HC, SUPER PRECISION, SER#
HC-8533-1, 3 PHASE
354 COLLETS, W/ STAND
355 VERTICAL BANDSAW, DOALL, MDL V-16, SER# 1652977,
BLADE WELDER, 3 PHASE
356 DOUBLE ENDED GRINDER, STANDARD MACHINE, 12"
GRINDER,220V
357 ROLLING CART, ULINE, 36"X25"
358 SET OF (4) MACHINE SKATES
359 GROUP OF MISC. MACHINING BITS
360 GROUP OF MISC. MACHINING BITS
361 GROUP OF MISC. MACHINING BITS
362 GROUP OF MISC. MACHINING BITS
363 GROUP OF MISC. MACHINING BITS
364 GROUP OF MISC. MACHINING BITS
365 ROLLING CART, ULINE, 36"X25", DOES NOT INCLUDE
CONTENTS
366 CABINET, 38"X24"X74", W/ MISC. CONTENTS TO
INCLUDE VARIOUS HARDWARE
367 DRIVING DOG SET, BROWN & SHARPE
368 3 JAW CHUCK, BUCK, 6"
369 MAGNETIC V-BLOCK, MITUTOYO, MDL 986-30
370 MACHINE VISE, L-W, 6"
371 MACHINE VISE, KURT, 6"
372 MACHINE VISE, KURT, 6"
373 GROUP OF (1) SLOTTED ANGLE PLATE & (1) SLOTTED
RISER BLOCK
374 GRANITE SURFACE PLATE, RAHN, 18"X12"X3", .000080
375 GRANITE SURFACE PLATE, 18"X12"X3", .000050
376 L-TYPE BORING TOOL HOLDER, SOCIÉTÉ GENEVOISE
377 WORK BENCH, 6'X3'X3', DOES NOT INCLUDE CONTENTS
378 COLLETS, W/ RACK
379 FLAT OF INDEXABLE TOOL HOLDERS
380 GROUP OF HOLD DOWNS
381 WORK BENCH, 5'X28"X3', DOES NOT INCLUDE CONTENTS
382 SHELF, 5'X22"X68",W/ CONTENTS
383 CABINET, 30"X11"X67", W/ VARIOUS HARDWARE
384 CABINET, 3'X25"X3', W/ VARIOUS HARDWARE
385 TOOL BOX, KENNEDY, 11 DRAWERS
386 GRANITE SURFACE PLATE, 2'X18"X4", .00010
387 FLAT OF INDEXER AND VISE
388 WORK BENCH, 5'X30"X31", DOES NOT INCLUDE CONTENTS
389 FLAMMABLE CABINET, JUSTRITE, 43"X18"X35", W/
CONTENTS
390 GROUP OF VARIOUS GRINDING WHEELS, W/ CABINET,
3'X18"X6'
391 DOUBLE ENDED POLISHER, HAMMONDS, MDL 7, SINGLE
PHASE
392 GROUP OF HOLD DOWN BOLTS
393 GROUP OF HOLD DOWN BOLTS
394 GROUP OF HOLD DOWN BOLTS
395 GROUP OF VARIOUS INSERTS
396 GROUP OF VARIOUS MACHINING
397 GROUP OF VARIOUS REAMERS
398 GROUP OF VARIOUS THREADER BITS AND MACHINING BITS
399 GROUP OF VARIOUS THREADER BITS AND MACHINING BITS
400 GROUP OF VARIOUS TOOLS
401 GROUP OF VARIOUS ALLEN WRENCHES
402 GROUP OF VARIOUS TOOLS
403 GROUP OF VARIOUS ALLEN WRENCHES
404 PORT-A-POWER, ENERPAC, MDL P392
405 GROUP OF (2) VARIOUS FANS
406 PAINT SPRAYER, WAGNER, MDL 150
407 GROUP OF VARIOUS AIR HOSES
408 (2) PIN GAGE SETS, MEYER; (1) 0.81-.250": (1)
0.230-.500"
409 CABINET, 3'X24"X3'
410 GROUP OF PRYBARS
411 MINI-FRIDGE, GE
412 GROUP OF VARIOUS CHUCKS
413 GROUP OF VARIOUS CHUCKS
414 GROUP OF USED TOOL INSERTS
415 GROUP OF VARIOUS HOLD DOWNS
416 GROUP OF VARIOUS FILES
417 GROUP OF (3) VARIOUS CORDED DRILLS
418 GROUP OF VARIOUS HOLD DOWNS AND MAGNETIC BLOCKS
419 GROUP OF BORING BARS AND TOOL HOLDERS
420 GROUP OF VARIOUS MACHINING BITS
421 GROUP OF VARIOUS C-CLAMPS
422 TOOL BOX, WORK SHOPS, 3 DRAWER
423 WORK BENCH, 5'X25"X34", DOES NOT INCLUDE
CONTENTS
424 GROUP OF VARIOUS COLLETS
425 GROUP OF VARIOUS COLLETS
426 GROUP OF VARIOUS COLLETS
427 GROUP OF VARIOUS COLLETS
428 GROUP OF VARIOUS COLLETS
429 GROUP OF VARIOUS COLLETS
430 GROUP OF VARIOUS COLLETS
431 GROUP OF VARIOUS COLLETS
432 CABINET SET & WORK BENCH SET, IRONMAN, (2) TWO
DOOR CABINETS, (4) OVER HEAD CABINETS, (2) UNDER-COUNTER CABINETS; 13'X18"X75"; W/ (2) STOOLS
433 WORK BENCH, 5'X29"X34"; W/ (2) PARTS CABINETS
434 SURFACE PLATE, 3'X30", W/ BENCH VISE AND CONTENTS
435 BENCH TOP DRILL PRESS, SHOP MADE
436 BELT SANDER
437 DOUBLE ENDED GRINDER, W/ ADDITIONAL WHEELS
438 WORK BENCH, 5'X3'X32", W/ BENCH VISE & (2)
STOOLS, DOES NOT INCLUDE PREVIOUSLY LISTED ITEMS
439 DUMP HOPPER, GAL FAB, 1-1/2 CU. YD.
440 DUMP HOPPER, GAL FAB, 1-1/2 CU. YD.
441 STEEL STOCK, 32-1/2" X 9"
442 SKID OF SHOP MADE TOOLING
443 SET OF FORK EXTENSION, 5'X8"
444 SKID OF VARIOUS STEEL
445 SKID OF VARIOUS PARTS
446 SKID OF VARIOUS STEEL
447 SKID OF VARIOUS PARTS
448 SKID OF QUICKRETE AND LEVELTECH
449 SKID OF VARIOUS LUBRICANTS
450 GROUP OF PARTS PINS
451 GROUP OF (2) SKIDS OF VARIOUS PARTS
452 SECTION OF PALLET RACKING, 9'X3'X10'
453 SECTION OF PALLET RACKING, 9'X3'X10'
454 GROUP OF PALLET RACKING, (3) UPRIGHTS, CROSS
BEAMS, W/ DECKING
455 PRESSURE TEST AND FLOW TEST BENCH
456 GROUP OF CABINET AND SHELF; W/ CONTENTS
457 WORK BENCH, 6'X29"X34", DOES NOT INCLUDE CONTENTS
458 WORK BENCH, 5'X29"X34", DOES NOT INCLUDE CONTENTS
459 ROLLING CART, RUBBERMAID, 36"X25"X33", TIMES THE Quantity: x2
BID
460 DUMP HOPPER, GAL FAB, 1-1/2 CU. YD.
461 DOUBLE ENDED GRINDER, DELTA, 1/2 H, 7"
462 DOUBLE ENDED GRINDER, ROCKWELL, 1/4 HP, 7"
463 CABINET, LISTA, 10 DRAWER, 28"X28"X42
464 CABINET, LISTA, 15 DRAWER, 28"X28"X59"
465 CABINET, LISTA, 10 DRAWER, 28"X28"X42
466 TOOL CHEST W/ TOP BOX, KENNEDY, 29'X20"X60" TOTAL
467 TOOL CHEST, FRONTIER, 62"X22"X37", W/ PEG BOARD
468 TOOL CHEST, FRONTIER, 62"X22"X37"
469 FLAT OF VARIOUS TOOLS
470 FLAT OF VARIOUS TOOLS
471 FLAT OF VARIOUS TOOLS
472 FLAT OF TORQUE WRENCHES AND SPANNER WRENCHES
473 FLAT OF BOX WRENCHES
474 FLAT OF VARIOUS GREASE GUNS
475 DUAL HEAD WORK LIGHT, UTILITECH
476 ROLLING CART, 36"X24"X32", DOES NOT INCLUDE
CONTENTS
477 ROLLING WORKTOP CABINET, DAYTON, 4'X2'X3', DOES
NOT INCLUDE CONTENTS
478 WORK BENCH, 5'X29"X33", DOES NOT INCLUDE CONTENTS
479 SHELF AND CONTENTS, 70"X39"X58"; INCLUDES VARIOUS
SHOP MADE TOOLING
480 SHELF AND CONTENTS, 60"X18"X50", INCLUDES VARIOUS
SHOP MADE TOOLING
481 SHELF AND CONTENTS, 60"X18"X50", INCLUDES VARIOUS
SHOP MADE TOOLING
482 SHELF AND CONTENTS, 4'X12"X62", INCLUDES VARIOUS
SHOP MADE TOOLING
483 SHELF AND CONTENTS, 4'X12"X71", INCLUDES VARIOUS
SHOP MADE TOOLING
484 SHELF AND CONTENTS, 4'X12"X71", INCLUDES VARIOUS
SHOP MADE TOOLING
485 SHELF AND CONTENTS, 4'X12"X62", INCLUDES VARIOUS
SHOP MADE TOOLING
486 SHELF AND CONTENTS, 4'X12"X71", INCLUDES VARIOUS
SHOP MADE TOOLING
487 SKID OF VARIOUS PARTS
488 L-SHAPED DESK, 55"X60"; DOES NOT INCLUDE CONTENTS
489 STEEL RACK, W/ (3) FOUR WHEEL DOLLYS
490 ROLLING CART, RUBBERMAID, 36"X24"X32", DOES NOT
INCLUDE CONTENTS
491 WORK BENCH, 5'X30"X32", DOES NOT INCLUDE CONTENTS
492 ROLLING CART, RUBBERMAID, 36"X24"X32", W/
CONTENTS
493 ROLLING CART, RUBBERMAID, 36"X24"X32", W/
CONTENTS
494 SECTION OF PALLET RACKING, 8'X4'X96", W/ DECKING;
DOES NOT INCLUDE CONTENTS
495 WORK BENCH, 5'X30"X32", INCLUDES CONTENTS AND
CABINET
496 GROUP OF VARIOUS FATIGUE MATS
497 GROUP OF VARIOUS FATIGUE MATS
498 ROLLING CART, RUBBERMAID, 36"X24"X32", W/
CONTENTS
499 STEEL TABLE, 27"X22"32", DOES NOT INCLUDE
CONTENTS
500 SHELF, 3'X1'X3'
501 WORK BENCH, 5'X30"X32", DOES NOT INCLUDE CONTENTS
502 WORK BENCH, 5'X30"X32", DOES NOT INCLUDE CONTENTS
503 TELEVISION, ELEMENT, 32", W/ SWIVEL WALL MOUNT
504 SHELF AND CONTENTS, 5'X22"X68", INCLUDES VARIOUS
SHOP MADE TOOLING
505 SHELF AND CONTENTS, 5'X12"X6', INCLUDES VARIOUS
SHOP MADE TOOLING
506 SHELF AND CONTENTS, 41"X12"X6', INCLUDES VARIOUS
SHOP MADE TOOLING
507 ROLLING CART AND SHELF, RUBBERMAID, 36"X24"X32",
W/ CONTENTS
508 BENCH AND CONTENTS, 5'X28"X34", INCLUDES VARIOUS
SHOP MADE PARTS
509 CRATES OF VARIOUS TOOLING
510 CONTENTS OFFICE TO INCLUDE BUT NOT LIMITED TO
U-SHAPED DESK, BOOK SHELF, FILING CABINET, WHITE BOARDS, COMPUTER CHAIR, CHAIRS, ETC.
511 CONTENTS OF OFFICE TO INCLUDE BUT NOT LIMITED TO
U-SHAPED DESK, CHAIRS, WHITE BOARD, FAN, ETC.
512 ALL IN ONE PRINTER, HP, MDL LASERJET M4555MFP, W/
DESK
513 GROUP OF MINI FRIDGE, RCA; COFFEE MAKER, NO POT;
CABINET
514 CONFERENCE TABLE, 10'X4', W/ 8 CHAIRS
515 CONTENTS OF OFFICE TO INCLUDE BUT NOT LIMITED TO
U-SHAPED DESK, CHAIRS, MONITOR, FILING CABINET, ETC.
516 CONTENTS OF OFFICE TO INCLUDE BUT NOT LIMITED TO
U-SHAPED DESK, BOOKSHELF, FILING CABINETS, PRINTER, TELEVISION, ETC.
517 PORTABLE A/C UNIT, LG, MDL LPO721WSR
518 OFFICE SUPPLIES TO INCLUDE BUT NOT LIMITED TO
PRINTER CARTRIDGES, NOTE PADS, TAPE, ORGANIZERS, ADDING MACHINE PAPER, FILE FOLDERS, ETC.
Click for Fr8Star Freight ShippingGet Shipping Quotes