1FDAF56F3XEB64430, 187,860 Miles, Power Stroke 7.3L V8 Diesel, Automatic Transmission, White With Gray Interior, Has Crank Windows And Bench Seat, Box Is16' Long 8' Wide And 7.5' Tall, 2000 lb Aluminum Lift Gate With A 7.5' × 6' Platform, Trailer Hitch, Passenger Side Fender Has Damage, Dings And Scratches Throughout Cab And Box, Passenger Blind Spot Mirror Cracked, Advertisement On Truck And Box Are Decals Not Paint, Box Has Scrapes Down Both Sides And A Dent On Front Over Head Also A Quarter Size Hole Near Back Driver Side, Box Floor Has Significant Rot from A Previous Leaking Water Tank, Consignor States Not From A Roof Leak

Batteries With Extendable Platform 216 Hours

Engine: 6.1L Hemi V8 engine Transmission: 5-speed automatic transmission Mileage: 102,78x miles Exterior Color: Silver Interior: Gray cloth seats Wheels: 18-inch steel wheels ith hub caps Tires: Yokohama 225/60R18 less than 10,000 miles Highlights: New Magnaflow Cat Back exhaust system installed with no miles on it. Very nice throaty sound. High-Performance Engine: The heart of this Charger is the formidable 6.1L Hemi V8, producing 425 horsepower and 420 lb-ft of torque. This powerhouse engine ensures thrilling acceleration and an unmistakable growl. Pursuit Suspension: The heavy duty suspension provides superior handling and a smooth ride, whether you're cruising on the highway or tackling tight corners. Bold Design: The Charger’s aggressive stance and sleek body lines make make it stand although the trim package screams sleeper. Interior: Inside, you'll find gray cloth seats, offering both comfort and support. The cabin is simple with center console shifting and cloth seats. Low Mileage: Although the car has 102,xxx miles, then powerful 6.1L Hemi has approximately 80,000 miles.

Hardtop Roadster Key Features: Engine: 2.0L DOHC 4-cylinder engine Transmission: 5-speed manual transmission Mileage: 70,56x miles Exterior Color: Classic Silver with Quadrifoglio Verde (four-leaf clover) badging Interior: Luxurious grey leather seats with red stitching Top: Black convertible soft top and matching hardtop Highlights: New fuel filter, in-tank fuel pump, main fuel pump and fuel level sending unit replaced in May 2024. Fuel tank thoroughly flushed in May 2024. Problematic clutch pivot arm replaced with upgraded version in April 2024. Cooling fan and coolant hoses replaced in May 2024. Cooling system flushed in May 2024. Engine and transmission mounts replaced in July 2023. See custom framed artwork of this car in photos. The owner was very proud of this car and created a one-of-a-kind 23" x 29" piece af art to commemorate it. Each square made from different materials such as; puzzle pieces, knitting, painting, 3D art, and more.

Works

33, Works

Disk Md130

Cart Not Included

Unknown, 22" Fan

Sitting

Been Sitting

Used 31 x 19 x 59

With Wheels, Works

200/230/460, Works

47

1200 PH3 1.5 HP, Works

Mounted

18 x 29, Cart Not Included

Recycling Unit 25 x 16 x 22

Works

All Other Parts Are Believed To Be Included, No Guarantee

Hours  RCK60P-21Z Deck

Fill with water and roll your lawn. Pull behind lawn tractor, UTV or ATV

- 1940s  1940s Manzel Buffalo Engine Stand with Universal Attachment Similar to the KR Wilson Engine Stand Aluminum construction, lightweight yet very strong design  Manzel made dealer service tools for Ford in late 40s early 50s for auto and tractor dealers.

easy storage Nice clamp for easy maintenance or storage of bicycle.

Service Valve Refacer   Black & Decker 9/16" N.W.A. Super Service Valve Refacer Grinder Needs thoroughly cleaned Stones and wheels still available

Roller Originally purchased to use as large scale tumbler, but no longer need. Retail new for over $2,400   USE COMMON STEEL DRUM FOR MIXING        NO PERMANENT CONTAINER TO PURGE BETWEEN BATCHES        USE SEPARATE DRUM FOR EACH BATCH         Portable Drum Rollers       Agitate your drum's contents without opening the drum! Incorporate important ingredients and eliminate sediment in the bottom of your drum. Mixing in closed drums eliminates the hazards, worker exposure, and messy cleanup associated with insertion or other mixers. This compact, portable mixer and drum cradle rolls closed drum to agitate the contents. You may also dispense directly from your drum through a faucet. This Morse drum roller is built to stand just 19.25" (48.9 cm) high when rolling a drum. The built-in tipping bar provides leverage to ease loading and unloading. The sides and back are enclosed to protect the drive.           Roll a drum from 6" to 28" (15.2 to 71 cm) in diameter, and measuring up to 40" (102 cm) tall. Note: The tipping lever will only engage a 30" (76.2 cm) or taller drum. Designed to provide efficient handling of liquid loads up to 500 Lb. (227 kg), at any of the available drum rotation speeds. Capacity for dry material in drums varies with speed (see model number chart). It handles up to 400 Lb. (181 kg) of dry load at 10 RPM, 300 Lb. (136 kg) at 20 RPM, 250 Lb. (113 kg) at 30 RPM. Wheels may be relocated by the user to accommodate various steel drum sizes.       Compact, portable drum rollers to mix the contents of your sealed drum Options: • #POLY-201 Roll plastic drum on Portable Drum Roller. • #1-5P Idler Attachment to roll 1 to 5 gallon pail. Remove easily to roll drum.       Â

Plumbing Snake Anger w/extra tips Current model ~$600 new The RIDGID K-380 Drain Cleaning Machine will clean drain lines up to 4″ in diameter and 75 feet in length. Corrosion-resistant cable drum holds 100 feet of 3/8″diameter cable or 75 feet of 1/2″cable. The drum is belt-driven by a 1/3HP electric motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord and a pneumatic foot actuator provides ON/OFF control of the motor. The cable is manually fed in and out of the drain. An optional autofeed is available that will advance or retract the cable at a rate of 18 feet per minute. An integral torque limiter will cause the drum to stop rotating when excessive torque is created. When the cutting tool that is attached to the cable hits a snag the drum stops rotating, allowing the operator to relieve tension on the cable. The integral wound cable has a quick change coupling system for disconnecting tools. This “Solid-Core†Integral Wound cable is a durable, kink-resistant cable.

24 x 21 x 19

x 3 each Morgan Insulated Fire Brick k23 is a type of soft brick made of refractory ceramic material, a blend of alumina and silica, that can withstand extremely high temperature applications and has a low thermal conductivity. Insulating fire bricks are excellent insulators and reflect heat well. Soft bricks are lighter and insulate better than hard bricks, and are used in general kiln construction. Retail $9.95/brick or $99.50/box Soft Insulating Refractory Fire Brick, Morgan Thermal Ceramics K-23 IFB

x 3 each Morgan Insulated Fire Brick k23 is a type of soft brick made of refractory ceramic material, a blend of alumina and silica, that can withstand extremely high temperature applications and has a low thermal conductivity. Insulating fire bricks are excellent insulators and reflect heat well. Soft bricks are lighter and insulate better than hard bricks, and are used in general kiln construction. Retail $9.95/brick or $99.50/box   Soft Insulating Refractory Fire Brick, Morgan Thermal Ceramics K-23 IFB Qty 10 Morgan K-23 Soft Insulating Refractory Fire Brick, Thermal Ceramics IFB

x 3 each Morgan Insulated Fire Brick k23 is a type of soft brick made of refractory ceramic material, a blend of alumina and silica, that can withstand extremely high temperature applications and has a low thermal conductivity. Insulating fire bricks are excellent insulators and reflect heat well. Soft bricks are lighter and insulate better than hard bricks, and are used in general kiln construction. Retail $9.95/brick or $99.50/box   Soft Insulating Refractory Fire Brick, Morgan Thermal Ceramics K-23 IFB Qty 10 Morgan K-23 Soft Insulating Refractory Fire Brick, Thermal Ceramics IFB

x 3 each Morgan Insulated Fire Brick k23 is a type of soft brick made of refractory ceramic material, a blend of alumina and silica, that can withstand extremely high temperature applications and has a low thermal conductivity. Insulating fire bricks are excellent insulators and reflect heat well. Soft bricks are lighter and insulate better than hard bricks, and are used in general kiln construction. Retail $9.95/brick or $99.50/box   Soft Insulating Refractory Fire Brick, Morgan Thermal Ceramics K-23 IFB Qty 10 Morgan K-23 Soft Insulating Refractory Fire Brick, Thermal Ceramics IFB

x 3 each Morgan Insulated Fire Brick k23 is a type of soft brick made of refractory ceramic material, a blend of alumina and silica, that can withstand extremely high temperature applications and has a low thermal conductivity. Insulating fire bricks are excellent insulators and reflect heat well. Soft bricks are lighter and insulate better than hard bricks, and are used in general kiln construction. Retail $9.95/brick or $99.50/box   Soft Insulating Refractory Fire Brick, Morgan Thermal Ceramics K-23 IFB Qty 10 Morgan K-23 Soft Insulating Refractory Fire Brick, Thermal Ceramics IFB

conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the National Electric Code When used as a type THHN conductor it is suitable for use in dry locations that are not to exceed temperatures of 90ºC THHN copper conductors are annealed (soft) copper Approx. 45 lbs

Compatible With FORD 1700 1720 1920 2120 3415 FO-35

Duty trimmer heads that fit most grass trimmers

Connectors, Tools, Adapters, Terminal caps, bag, etc RG5 RG6 Cable TV Antennas Â

Tester The Slaughter 1108-5.0 Hipot is a high-performance electrical safety testing instrument designed for evaluating the insulation integrity of electrical devices and components. It specializes in hipot (high potential) testing, enabling users to apply high voltages to the device under test to identify potential insulation breakdowns or defects. With its reliable performance and user-friendly interface, the Slaughter 1108-5.0 Hipot ensures precise and consistent testing outcomes, making it suitable for a wide range of industrial applications where electrical safety is crucial. Specifications – Model: Slaughter 1108-5.0 Hipot – Test Voltage Range: Adjustable test voltages up to 5.0 kV – Test Current Range: Adjustable test currents for leakage current testing – Measurement Range: Wide measurement range for insulation resistance testing – Accuracy: High measurement accuracy for reliable results – Display: Clear digital display for easy reading of test results – Safety Features: Built-in safety mechanisms to protect operators and equipment during testing – Compliance: Compliant with industry standards and regulations for electrical safety testing – Interface: User-friendly interface with intuitive controls for easy operation – Connectivity: Optional connectivity features for data logging and remote control – Applications: Suitable for testing insulation integrity in electrical equipment, cables, transformers, motors, and other components in various industries, including electronics manufacturing, automotive, aerospace, and electrical utilities.

wand included

ML500K2C10C6S

on service vans Great for storing fishing poles and levels

knife and bladed sharpening

Perfect for the hobbyist or collector

Wrench Very nice original condition Top quality vise for the collector or shop use

Sharpening Set 3 Stone IM313 System Heavy cast iron construction All stone in good condition

type Perfect size for a home shop or small garage

acoustic resonator from the 70's and built in Japan. It is in very good condition given it is likely 40+ years old. There are some some scratches, dings and some overall finish aging with plenty of play life left. The resonator is a single cone with a wooden biscuit at the center. Fabric on the sound holes is in amazing shape. The headstock is retro/vintage slotted style with top facing tuning keys. The nut has a metal riser to bring the action up to slide level.

Body Made in USA Â

Alvarez Model 5001 is a classical acoustic guitar made in Japan in the 1970s. It has a spruce top, laminated rosewood back and sides, a mahogany neck, and a rosewood fingerboard. The guitar is known for its high quality and affordability, and is played by many musicians, including Jerry Garcia, Bob Weir, and Ani DiFranco.

Back and Sides | Tropical Mahogany Neck | West African Crelicam Ebony Fretboard | Expression System® 2 Electronics | Venetian Cutaway |

Neck Material:Maple Fingerboard:Ebony Fingerboard Radius:Flat Neck Profile:Flat D Nut:Bone 1 3/4" Scale Length:670mm Bracings:Ladder Body Top:Sitka Spruce Body Back/Sides:Rosewood Laminate Bridge/Saddle:Traditional Rosewood Mustache 2 5/32" Rosette:Laminated Wood Truss Rod:Dual Acting Binding:Top Binding Material:Rosewood Tailpiece:Traditional Gypsy Style Logo:Painted Logo Inlay:Pearl Dots Side Dot Color:White Body Top Finish:Satin Finish Back/Sides Finish:Satin Finish Hardware Color:Nickel Tuners:Gotoh SE770 Strings:D'Adarrio EJ83M .011-.047 Action Height:12th fret 3/32" on the bass side and 2/32" on the treble side Truss Rod :4mm   Â

WineKeeper Napa 4 Bottle (Mahogany) Dual Zone (P/N 7755). The WineKeeper Napa, an exquisite handcrafted wood wine cabinet, is designed to cool and dispense red and white wines by the glass. The system uses a pressurized blanket of inert nitrogen or argon to protect wine from oxidation and spoiling. There is enough room to hold a few backup bottles at proper temperature behind the dispensing bottle, ready to be put to use. The system requires a minimum vented air space of 2" on each side, 3" behind and 12" above unit. The Napa maintains a temperature range for white wine of 42 - 48F, and 58 - 64F for red wine. System includes: Two-stage regulator Thermometer Sliding doors with insulated glass 8' braided tubing with metal quick connect Interior lighting Manual defrost Compatible with your choice of Argon or Nitrogen gas via CGA-580 refillable cylinder (sold separately). The gas cylinder is designed to be located outside the unit, and is attached via 10' of hose (provided), allowing it to be stored in a remote location.

50’ Tape

Blanks, and Holders

Alloys

Wrench Model# MSW 523R

Charger And NO Battery

Adaptors

Set Mostly NIB

Indicator

Miniature Drill Bits

Tools

Magnetic Bases

Tachometer

Sander Cleaner

Pump, & Core Drill Bits

Remote

Remote

Remote

Conmet I Conductivity Meter

Gauge

Tachometer, Shimpo Digital Tachometer & Chatillon Force Gauge

Cylinder

Of Filters

Of Filters

Of Filter

Of Filter

Of Filter

Of Filter

Of Filter

Of Filter

Of Filter

Of Filter

Jewel Visor Lamp

More

Mare

Pot & RR Light