Cubic Defense Applications 323260-1 ITS System Instrumental Kit. 36"x36"

Cubic Defense Applications 323260-1 ITS System Instrumental Kit. 36"x36"

very nice. well constructed.

$2,696.62 each suit. Ots 600 dry suit, unused, RAVEN AEROSTAR, 601GBR005B. Special Features: Color-grey, cross chest entry zipper, 10 inch vertical relief zipper, latex neck seal, neoprene wrist seal. extremely high value lot. UNUSED. TEN SUITS! various sizes COLOR-GREY,CROSS CHEST ENTRY ZIPPER,10 INCH VERTICAL RELIEF ZIPPER,LATEX NECK SEAL,NEOPRENE WRIST SEAL

Note: some of these may have broken fiberglass sticks.

on angle iron base.

Note: some of these may have broken fiberglass sticks.

Needs New Batteries (2). Works Good with New Batteries, Looks Unused.

estimated $2400 replacement value. you are buying all of them! (14) for $195

on angle iron base. can be de-horned to make a horse

on angle iron base.

3 phase.

MREG-5134X Matheson

MREG-5134X Matheson

MREG-5134X Matheson

MREG-5134X Matheson

MREG-5134X Matheson

MREG-5134X Matheson

Commercial, not so much residential.

on angle iron base.

Vin # 4Z3HAACG92RJ77941, GVWR 73,000 lbs, Ladder Towers Make LT1, Model LT-102, Rated Capacity 1,000 LBS, Rated Reach 93 Feet, Date of Manufacture December 2001, Serial # 0104222, Rated Vertical Height 102 Feet, Max Hydraulic System Pressure 2800 psi, KE Auto Charge Battery Monitor, 9,084 Miles on Odometer, 1,070 Hours on Hour Meter, 372 Hours on Aerial Meter, Pump Model QMAX-200-215, GOV RPM 2225, Eng/Pump Ratio 1:2.13, Hale Model OMAX 200-15, Serial #81704, Water Leaks on Boom, Has been out of service for 2 years, Three New Batteries, no siren (it is gone, somebody crawled under the fence and stole it, could not get a good shot, they got away.

with 4 shower heads and all accessories

(for propane tank), cable tie down, hose quick connect

Tornado Shelter, has lighting, working condition of A/C unknown, no bathrooms.

All One Money.

these are stackable as shown in photo, you are buying one

these are stackable as shown in photo, you are buying one

these are stackable as shown in photo, you are buying one

these are stackable as shown in photo, you are buying one

$7717 Price is Still on It! 2020 Model.

Tandem Axle, (2) 7000 LB Axles

USMC MEPDIS-R 5kW Outdoor Box with Cord Sets and Spare Plugs, LEX DB-30NA-A22-S3 Part Number DB-30NA-A22-S3 NSN Number 6110-01-0532-1821 Markets Military Rating Outdoor Enclosure Box Amperage 30A Fully insulated heavy-duty molded rubber enclosure with HDPE top and bottom provides superior impact, weather, chemical and shock resistance - Tested and passed MIL-STD-810F for: High and low temperature Solar radiation Rain, salt, fog, sand, dust, icing and freezing rain Road mission Drop Test - Hydraulic-magnetic circuit breakers prevent nuisance tripping due to high ambient temperatures Units can be stacked, saving space - Elevated base keeps receptacles above ground level Fully insulated heavy-duty molded rubber enclosure with HDPE top and bottom provides superior impact, weather, chemical and shock resistance - Tested and passed MIL-STD-810F for: High and low temperature Solar radiation Rain, salt, fog, sand, dust, icing and freezing rain Road mission Drop Test - Hydraulic-magnetic circuit breakers prevent nuisance tripping due to high ambient temperatures Units can be stacked, saving space LEX DB-30NA-A22-S3 PORTABLE POWER DISTRIBUTION UNIT 30A 3P 4W 208/120V

USMC MEPDIS-R 5kW Outdoor Box with Cord Sets and Spare Plugs, LEX DB-30NA-A22-S3 Part Number DB-30NA-A22-S3 NSN Number 6110-01-0532-1821 Markets Military Rating Outdoor Enclosure Box Amperage 30A Fully insulated heavy-duty molded rubber enclosure with HDPE top and bottom provides superior impact, weather, chemical and shock resistance - Tested and passed MIL-STD-810F for: High and low temperature Solar radiation Rain, salt, fog, sand, dust, icing and freezing rain Road mission Drop Test - Hydraulic-magnetic circuit breakers prevent nuisance tripping due to high ambient temperatures Units can be stacked, saving space - Elevated base keeps receptacles above ground level Fully insulated heavy-duty molded rubber enclosure with HDPE top and bottom provides superior impact, weather, chemical and shock resistance - Tested and passed MIL-STD-810F for: High and low temperature Solar radiation Rain, salt, fog, sand, dust, icing and freezing rain Road mission Drop Test - Hydraulic-magnetic circuit breakers prevent nuisance tripping due to high ambient temperatures Units can be stacked, saving space LEX DB-30NA-A22-S3 PORTABLE POWER DISTRIBUTION UNIT 30A 3P 4W 208/120V

prices for these are all over the place in the interwebs, $3500 - $8500, We Will Let Everybody in! Amperage 400 Amp Applications Commercial / Institutional Buildings / Structures - Power Distribution and Controls Enclosure 3R Enclosure Material Steel Material Steel NEMA Size 3R Number of Poles 3 Pole Number of Wires 3 Wire Type Heavy Duty Fusible Safety Switch Voltage 600 Volt Manufacturer Information Brand Cutler-Hammer Manufacturing Co. General Product Info 12-Digit UPC 782113207216 Product UPC 78211320721 Weight 105.8 lb Dimensions Height 10-1/4 Inch Length 45-1/2 Inch Width 24.38 in Amperage Rating 400A Enclosure Specification NEMA 3R Height 10.25 IN Length 45.5 IN Number of Poles Three-pole Number of Wires / Conductors Three-wire Part No. 349946 Type Single-Throw Voltage Rating 600V Weight 118 LB

one piece is broken off

"G"

heavy duty.

heavy duty.

heavy duty.

heavy duty.

heavy duty.

heavy duty.

heavy duty.

"G"

"G"

Works Good, Industrial.

/Freezer, "G" Works Good

UNUSED, "G"

Tool Included, Parts Bins, Bolts. All One $

may have a few dents, "G", works good

Motor is Bad.

$16 Shipping

$16 Shipping

$16 Shipping

with hitch and ball, shelf unit is 39"x36"

with hitch and ball, shelf unit is 39"x36"

UNUSED, Never Put in Service. Scientific Systems, Surge Brakes on Trailer,

with hitch and ball, shelf unit is 39"x36"

with top for canopy. one of a kind.

Pipe Racks, 26' Total Length Tandem Axle, Gooseneck, Ameritrail, 18' Bed, Note: one of the Jacks is Bent (need a new one)

Roof A/C. NOTE: All Door Ways and Cielings are not More Than 4'-5' in Height. Good For Children, Dwarfs or Midgets.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

make a nice pistol case.

Lift Top Style

87"x39.5"x32"h, Marble Top is Broken

Crystallica Silica

weather proof

weather proof

weather proof

weather proof

weather proof

weather proof

is Bad, Needs Replacing or Repair), Engine Runs Good. Starts and Runs, Power Steering. Diesel.

100"x39" one of a kind. no walmart here, not made in China. made in Sealy, Texas.

Lift Top Style

very expensive replacement value, study your lessons. $49 Shipping

steps on both sides

Age and Origin Unknown, Estate Find. $39 Shipping to Lower 48 States.

All Axles Drive, call the owner 713.819.3552 for more info, running condition unknown.

Brass Valves and Fittings. Steel Strainer. High Dollar

Brass Valves and Fittings. Steel Strainer. High Dollar

Electric Start, Diesel Water Heater and Gas Engine for Pump, 87"x44"x48". Nice Unit.

1960's? (paper says used on nuclear reactor) in old case, Vintage. shipping is available

with circuit breaker

with circuit breaker

with case You will inflate this tent self-supporting

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

Plastic/Fiberglass/Resin. 42"x62"

No Title, Louisiana Registration Included, 1988 Boat Hull 17 Ft Long, 4 Foot Beam. Boat Trailer # C7LSAJ1006681. no motor

Application Freightliner; Sterling; Western Star Type Tube & Fin Height 36-15/16 In. Width 26-9/16 In. Thickness 1-15/16 In. Inlet 4 In. Outlet 4 In.

lightly used

one handle, Welding Rod Oven

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

140J, 140 watt, $544 Each Retail, Polycrystalline,

with case You will inflate this tent self-supporting

good for I/O seat covers

good for I/O seat covers

good for I/O seat covers

Case in John Deere Green

with case You will inflate this tent self-supporting

with case You will inflate this tent self-supporting

Industrial, one cost the opening bid.

Vertical

Does Not Include Battery, $19 Shipping

Does Not Include Battery, $19 Shipping

Vertical, 75HP! Study Your Lessons!

on Meter. Everything Works As It Should, Ladder Truck, Spartan Motors, Model GA40M-3164, Vin # 457BT9F00NC005022, SO 5022, Date of Manufacture 10-22-91, Engine: Detroit Diesel Series 60, ID #06R0059621, Gross HP 450 at 2100 RPM, MAX GVW 52,740, Hale Fire Pump Model - OSM0200-21L, Serial # 61301, 50' Tele-Squrt 2 section telescoping boom Model 020121428, Rated Vertical Height 50 Feet, Rated Horizontal Rach 42 Feet, 1480 Hours on Meter. Very Nice!

Size, Cat #: GAM8SF, Poletop Slip-Fitter, 1-1/2” or 2” Pipe Size, for Appleton Areamaster LED Flood/High Bay Luminaires 6.24 (lbs/each) All One Money, One Sells For $229 Fixture Mounting Size 2 or 2-1/2 Inch Additional Information Includes Yoke Bolt, (3) Locking Bolt, Cord Grip Finish Zinc Plated Chromate Sealed Bronze Polyester Bracket Mounting Type Pole Top Used On Areamaster 250/400 Integrally Ballasted Floodlight Fixture Fixture Mounting Type Yoke Type Slipfitter Brand Name Areamaster Material Malleable Iron

HAK-JB3-100, explosion proof junction box, Buying ONE! we have more Adalet - Power Supply, Equipment Ground Kit Hard to Find These Under $1000 a unit

1.5"x2"

Tubes, Multipurpose Calcium Complex Grease Perfect for use in a variety of applications where water resistance is important. MPG-2 is a polymer-fortified grease formulated for use in a wide variety of industrial applications. MPG-2 combine a patented calcium complex thickening process with a special blend of highly refined base oils to deliver unequaled protection in tough applications. MPG-2 has excellent high temperature stability and very good water resistance. The high molecular weight polymers allows MPG-2 to form a protective film between metal surfaces that is difficult to remove. MPG-2 also protect against extreme pressure. Key Properties Formulated to resist water washout Polymer-fortified petroleum grease; minimizes pound-out, sling-out, and melt-out Anti-wear; extends bearing life, reduces downtime Extends grease intervals; reduces maintenance costs Multipurpose applications; eliminates the need for multiple greases Applications and Uses MPG-2 is for multipurpose use, especially in systems requiring good water washout resitance. Prior to installation, purge the equipment and dispensing equipment system with MPG-2. Use MPG-2 multi-purpose grease directly from its container. MPG-2 may be dispensed by the following: Hand-operated grease guns Air-operated grease guns and pumps Electric grease guns and pumps Spring-operated automatic grease reservoirs

Tank Truck Coupler x TTMA Flange, 3", Aluminum (TTF30C), TTF30C / 60583000 | Tank Truck Coupler x TTMA Flange, 3", Aluminum, 300 Stainless Steel Cam Arms, Conforms to Truck Trailer Manufacturers Association (TTMA) Standards, Petroleum Handling. More Information Weight 2.960000 Brand PT Coupling Company Product Type Simple product MPN 60583000 Product TTMA Connections Model TTF30C Size 3" Material Aluminum Construction Made in the U.S.A. Certifications Tank Truck Flanges conform to (TTMA) Truck Trailer Manufacturers Assoc. standards. Note Cam arms are made of 300 series Stainless Steel

$332.95/ each wholesale

3/4" Connectors For Jacketed Metal Clad Cable. Utilizes RapidEx high speed liquid resin sealing compound included with each gland For use on horizontal or vertical runs Simplified two piece design Independent sealing and armor clamping/ grounding True 360° grounding Removable cable armor end stop accommodates larger insulated conductors Superior pull out prevention Compact slim profile Widest cable acceptance range Disconnectable design Additional integral deluge proof seal for protection in extreme offshore and onshore environments Continuous operating temperature: -60 °C to +85 °C (-76 °F to +185 °F)

1/2" Connectors For Jacketed Metal Clad Cable. Utilizes RapidEx high speed liquid resin sealing compound included with each gland For use on horizontal or vertical runs Simplified two piece design Independent sealing and armor clamping/ grounding True 360° grounding Removable cable armor end stop accommodates larger insulated conductors Superior pull out prevention Compact slim profile Widest cable acceptance range Disconnectable design Additional integral deluge proof seal for protection in extreme offshore and onshore environments Continuous operating temperature: -60 °C to +85 °C (-76 °F to +185 °F)

Cable Gland, Appleton TMC2X-125137A TMC2X Cable Gland - Thread Size 1-1/4" - New - MSRP $214 Appleton TMC2X Connectors are designed for use with MC/MC-HL, corrugated interlocked aluminum/steel armor or continuously welded armor (TECK) cables. They utilize RapidEx high speed liquid resin sealing compound. TMC2X connectors are used to provide a means for terminating jacketed type MC cable, forming a mechanical watertight connection and providing ground continuity for cable armor.

Union, Thermoplastic Valves Hayward valves are designed using the latest state-of-the-art equipment. Our CAD system, linked to finite element software, provides accurate and essential stress analysis. Hayward valves are designed to be strong - with material where it counts. Pressure and prolonged operation will not fatigue Hayward valves. Thus, Hayward provides years of maintenance-free service. TB Series True Union Ball Valves Product Description TB Series true union ball valves are offered in PVC, CPVC and Platinum GFPP. O-rings are FPM or EPDM and seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. A trigger style lockout handle is an option. All valves are assembled with silicone free lubricant. Features : NSF/ANSI 61 Listed PVC, CPVC and GFPP Full Port Design Reversible PTFE Seats Double O-Ring Stem Seals Easy to Service Easily Automated Options : Lockouts Available 2 in. Square Operating Nut Stem Extensions Pneumatic and Electric Actuators Spring Return Handle Applications : Water & Wastewater Treatment Chemical Processing Food & Beverage Swimming Pools & Water Parks Aquaculture Aquarium & Zoo Service Pharmaceutical Pulp & Paper Landfill Service Marine & Corrosive Environments Metal Finishing & Plating Brand Hayward Inlet Size 1/2 in Material - Housing CPVC Outlet Size 1/2 in Material - Seats PTFE Max Pressure 150 psi (10.3 bar) End Connection Socket/Threaded

Mounting Brackets,Pentair HAK-C-100 Raychem Hazardous Location Connection Kit.

350600-00, made in France, Spirax Sarco, high dollar

Modular designed filter with condensate outlet With filter head made of PVDF Deep-acting PTFE filter element with a filter porosity of 2 µm With wall-mounting bracket Straightforward filter element change without tools Low dead volume For universal use 3 female threaded gas connections: G 1/4" Condensate outlet with compression tube fitting: GL 25 nut with GL 25 - 12 mm sealing ring Sample gas and ambient temperature: max. +80 °C [+176 °F] M&C universal filters reliably separate solids, in particular extremely fine particles, occurring in analytical technology in gas filtration, using very fine, deep-acting filter elements. Thanks to their universal design, the filters can also be used as separators (without a filter element), liquid filters or, with adsorption cartridges, as an adsorption filter. For ambient or medium temperatures of up to 180 °C, a stainless steel version FSS or the FT-H version can be offered.

EACH! Tripp Lite SRBOLTDOWN Rack Enclosure Server Cabinet Stabilizing Bolt Down Kit Bolt-down Kit for cabinets and racks Enables SmartRack to be secured to concrete floor Provides extreme stabilization and security Includes required nuts and bolts Easily Secure a Rack Cabinet to a Concrete Floor and 5-Year Warranty With the SRBOLTDOWN’s included mounting hardware and a user-supplied concrete drill (Tripp Lite recommends using a ½-inch bit size), any SmartRack cabinet can be secured to a concrete floor. Just drill the holes, insert the included anchors, and tighten the included bolts to secure the unit into place

High Efficiency. $42.36 EACH

High Efficiency. $42.36 EACH

High Efficiency. $42.36 EACH

High Efficiency. $42.36 EACH

High Efficiency. $42.36 EACH

power connect. Thermon 23400, DP Power, In-Line Splice, End Term Kit, Terminator DP Power Connection Kit For Power Connection, In-Line Splice Connection, T-Splice Connection or End Termination, 600 Vac, 50 Amps, NEMA 4X, IP66 Enclosure Ratings, -76°F Min. Installation Temperature, 6 AWG Maximum Conductor Size Terminator DP is designed to fabricate power connections, in-line/T-splice connections or for making end terminations. Electrical connections are made in terminal blocks utilizing nickel-plated copper terminals to ensure corrosion-free electrical integrity. Certifications/Approvals: • Ordinary & Hazardous Locations • Class I, Division 2, Groups A, B, C, & D, Zone 2 IIC • Class II, Division 2, Groups F & G, Class III • Listed Heat Tracing Cable System 137M Kit Contents: Quantity Description 1 Expediter Assembly 1 Support Cap with O-Ring 1 Threaded Grommet Compressor 1 Grommet 1 Support Base with O-Ring 1 Junction Box Lid 1 Junction Box Base with O-Ring 1 Nut 1 Banding 1 Banding Guide 1 Lamp Terminal Blocks with DIN Rail (22-8 AWG, 600 Vac, 50 Amp) 1 Junction Box Cord Notes: 1. Terminator DP kit includes three terminal blocks (L1, L2 and G). 2. Higher ambient temperatures are possible. Consult Winn-Marion for corresponding T-rating. sell for 275 each ebay

Goes with the previous lot I believe.

Lighted End Seal Kit, High-Profile End Seal Kit NVENT RayCHEM nVent RAYCHEM E-100 is a series of cold-applied high profile end seals for trace heating cables in both non-hazardous and hazardous locations. Mounted on the pipe, through the thermal insulation and cladding. Includes cold-applied heating cable core sealer. Option with LED light indicator available.

Replacement Price TC 202A-SSR30B-240-F-SS3, Thermon HeatChek TC 202a Temp Control & Monitoring module - New- (Sells for $2700 without Junction Box) Stainless Steel Junction Boxes such as this one sell for $$1400-$1600. Thermon TC 202A-SSR30B-240-F-SS3 VAC: 480/240/120 50/60Hz The TraceNet TCM2 is a microprocessor based temperature control and monitoring module developed specifically for heat tracing applications. TraceNet Control and Monitoring System, we are pricing for a used one with no box.

Replacement Price TC 202A-SSR30B-240-F-SS3, Thermon HeatChek TC 202a Temp Control & Monitoring module - New- (Sells for $2700 without Junction Box) Stainless Steel Junction Boxes such as this one sell for $$1400-$1600. Thermon TC 202A-SSR30B-240-F-SS3 VAC: 480/240/120 50/60Hz The TraceNet TCM2 is a microprocessor based temperature control and monitoring module developed specifically for heat tracing applications. TraceNet Control and Monitoring System, we are pricing for a used one with no box.

Replacement Price TC 202A-SSR30B-240-F-SS3, Thermon HeatChek TC 202a Temp Control & Monitoring module - New- (Sells for $2700 without Junction Box) Stainless Steel Junction Boxes such as this one sell for $$1400-$1600. Thermon TC 202A-SSR30B-240-F-SS3 VAC: 480/240/120 50/60Hz The TraceNet TCM2 is a microprocessor based temperature control and monitoring module developed specifically for heat tracing applications. TraceNet Control and Monitoring System, we are pricing for a used one with no box.

Replacement Price TC 202A-SSR30B-240-F-SS3, Thermon HeatChek TC 202a Temp Control & Monitoring module - New- (Sells for $2700 without Junction Box) Stainless Steel Junction Boxes such as this one sell for $$1400-$1600. Thermon TC 202A-SSR30B-240-F-SS3 VAC: 480/240/120 50/60Hz The TraceNet TCM2 is a microprocessor based temperature control and monitoring module developed specifically for heat tracing applications. TraceNet Control and Monitoring System, we are pricing for a used one with no box.

Replacement Price TC 202A-SSR30B-240-F-SS3, Thermon HeatChek TC 202a Temp Control & Monitoring module - New- (Sells for $2700 without Junction Box) Stainless Steel Junction Boxes such as this one sell for $$1400-$1600. Thermon TC 202A-SSR30B-240-F-SS3 VAC: 480/240/120 50/60Hz The TraceNet TCM2 is a microprocessor based temperature control and monitoring module developed specifically for heat tracing applications. TraceNet Control and Monitoring System, we are pricing for a used one with no box.

Replacement Price TC 202A-SSR30B-240-F-SS3, Thermon HeatChek TC 202a Temp Control & Monitoring module - New- (Sells for $2700 without Junction Box) Stainless Steel Junction Boxes such as this one sell for $$1400-$1600. Thermon TC 202A-SSR30B-240-F-SS3 VAC: 480/240/120 50/60Hz The TraceNet TCM2 is a microprocessor based temperature control and monitoring module developed specifically for heat tracing applications. TraceNet Control and Monitoring System, we are pricing for a used one with no box.

one $

Cable Surround, Boots, Gates Static Strips and More!

BA05B3U01P2, UNUSED. Prices Range from $2416 - $3874. Bladder accumulators are excellent for storing energy under pressure, absorbing hydraulic shocks, and dampening pump pulsation and flow fluctuations. They are a cost effective option with fast response time and are compatible with low lubricity fluids. Hydraulic Accumulator.

BA05B3U01P2, UNUSED. Prices Range from $2416 - $3874. Bladder accumulators are excellent for storing energy under pressure, absorbing hydraulic shocks, and dampening pump pulsation and flow fluctuations. They are a cost effective option with fast response time and are compatible with low lubricity fluids. Hydraulic Accumulator.

(2) 4", These are Butterfly Valves, UNUSED.

MSRP: $3,013.00 Wholesale $1,835.92. Horizontal. 230/460

Transformer Cooling Fan Motors, phase 1, 115 volts, Totally Enclosed Non-Ventilated design with automatic reset overload protection. Bearings are fully sealed and permanently lubricated for life with heavy duty grease. Single phase motors are permanent split capacitor design. Motor is weather proof with shaft slinger, rotor and small parts zinc phosphate treated, Class F insulation rated with Class B temperature rise. Connection can be made in end bracket with lead entry through 1/2” FPT hole. Motor is furnished with drain holes to allow draining of condensation. Motor may be used in shaft Horizontal, Vertical Up, or Vertical Down.

Pallet Lot. it's like buy one get nine free!

Pallet Lot. it's like buy one get nine free!

Pallet Lot. it's like buy one get nine free!

Pallet Lot. it's like buy one get nine free!

Pallet Lot. it's like buy one get nine free!

Pallet Lot. it's like buy one get nine free!

Toaster Oven. All One Money.

Last One Left! Model # AG-7100R, 1 Year Remaining Extended Warranty. Hale Premiere Zero Gravity Recliner with Air Massage. Like New. Proprietary Memory Foam - For the seat, backrest and neck cushion. One Touch Zero Gravity - Easily adjust to a Zero Gravity position with one touch of a button. Adjustable Lumbar Support - With added heat to soothe aching muscles. Raised Seat - Making standing up from a seated position easier. Air Chamber Massage - Built into back and seat. Dual Motor - For the independent lift of the backrest and footrest. The Hale Premiere Zero Gravity Recliner with Air Massage helps you obtain the ultimate relaxation experience through a combination of stretching, air massage, and lumbar and seat heat. Ease pain and melt away stress with the use of this remote-controlled heated recliner. It is conveniently designed with a dual motor to provide independent controls for the footrest and backrest for maximum comfort. The Hale Premiere reclining massage chair is controlled by a simple power remote that can help you reach a personalized ideal comfort position. This reclining massage chair can put your muscles at ease through a Zero Gravity position that promotes improved blood flow and circulation. Through the simple touch of a button, this heated recliner with proprietary memory foam can reach an infinite number of positions that release joint tension and soothe sore muscles. For an even more customized experience, the power and heat can be adjusted to a preferred setting. The adjustable power lumbar and built-in air chamber massage is designed to help you achieve ultimate comfort and put your muscles at ease.

sign has original cast iron base, embossed. automotive clear coated.

welded construction, 10'+H x 89"x48". will load with forklift.

made from Clear Coated Marine Chain and Wood.

made from Clear Coated Marine Chain and Wood.

made from Clear Coated Marine Chain and Wood.

from clear coated Marine Chain.

In Box, XEN4D4lNO, Federal Signal XEN4D4LNO 110VAC Explosion-Proof Strobe Light Federal Signal $1,683.75 eral Signal’s 2000 Series Models XEN1 and XEN4 xenon beacons are visual warning lights for use that require ATEX approval. Model XEN1 is a strobe light that contains a single xenon flashing tube. This makes it ideally suited for use in indoor explosion-proof areas that require compliance to European electrical safety directives. Model XEN4 is a strobe light that utilizes four strobe tubes, timed in a sequential manner, to simulate the operation of a mechanical rotating beacon. This four-strobe version is ideal in outdoor situations where a conventional beacon may not be adequate. Flameproof strobe lights are is sealed from dust and water by a nitrile rubber o-ring seal. All exterior cast aluminum surfaces are finished in powder coat paint and external hardware is manufactured from stainless steel to resist corrosion. The 2000 Series beacon is externally powered by a DC or AC power source. Screw type terminal blocks are provided for field wiring on all units. All variations of the 2000 Series beacon feature a four entry fixture to allow cable looping. These cable entries are metric (M20 X 1.5) but other configurations are available upon request. Single and four strobe tube models Internal fresnel lens (sold separately) Six lens colors: Amber, Blue, Clear, Green, Red and Yellow Ex de terminal chamber available IP66 enclosure Approved for use in Zone 1, 2, 21, 22 Atmospheres Corrosion resistant powder coat finish Stainless steel external hardware

In Box, XEN4D4lNO, Federal Signal XEN4D4LNO 110VAC Explosion-Proof Strobe Light Federal Signal $1,683.75 eral Signal’s 2000 Series Models XEN1 and XEN4 xenon beacons are visual warning lights for use that require ATEX approval. Model XEN1 is a strobe light that contains a single xenon flashing tube. This makes it ideally suited for use in indoor explosion-proof areas that require compliance to European electrical safety directives. Model XEN4 is a strobe light that utilizes four strobe tubes, timed in a sequential manner, to simulate the operation of a mechanical rotating beacon. This four-strobe version is ideal in outdoor situations where a conventional beacon may not be adequate. Flameproof strobe lights are is sealed from dust and water by a nitrile rubber o-ring seal. All exterior cast aluminum surfaces are finished in powder coat paint and external hardware is manufactured from stainless steel to resist corrosion. The 2000 Series beacon is externally powered by a DC or AC power source. Screw type terminal blocks are provided for field wiring on all units. All variations of the 2000 Series beacon feature a four entry fixture to allow cable looping. These cable entries are metric (M20 X 1.5) but other configurations are available upon request. Single and four strobe tube models Internal fresnel lens (sold separately) Six lens colors: Amber, Blue, Clear, Green, Red and Yellow Ex de terminal chamber available IP66 enclosure Approved for use in Zone 1, 2, 21, 22 Atmospheres Corrosion resistant powder coat finish Stainless steel external hardware

Applicator, All UNUSED.

Transport Box, Pelican 1360

Container/Box.

Container/Box.

high dollar box

high dollar box

high dollar box

high dollar box

high dollar box

Container.

Container.

Container.

Container.

Container.

Box/Container.

Box/Container.

Box/Container.

150psi, NEW, UNUSED. Fisher 2625 series volume boosters are used in conjunction with a positioner on a throttling control valve to increase stroking speed. Input Signal Pneumatic Max Outlet Pressure 150 psig Mounting Type Actuator Mount Operating Temperature Standard Temperature, High Temperature Position Control Modulating Control Safety Certification SIL 3 capable Supply Media Air, Natural Gas

Electrothermal MC5X1 - 115V and 460W Maximum Power 1-Way Heating Controller. 115V and 460W Maximum Power 1-Way Heating Controller Cost-effective control of resistive heating loads Provide manual control of uncontrolled heating mantles, tapes, and cords Compact - use on benchtop or mount to frame

FLEXIM FLUXUS ADM 7407 Ultrasonic Clamp-On Liquid Flow Meter # NEW, $1500-$2000. (3) Flexim Junction Boxes, Test Jumper, Transformer. German Made. High Value Lot.

both for one money!

Switches and More, All Unused. Seventeen (17) Items! Terminal Strips. resellers dream!

Box

Box

EACH , Total Value $1156. B Series, an exceptional performing industrial valve in a compact size with an enhanced flow range. Available in solenoid pilot operated and remote air pilot models. The B series features Parker's proven WCS (Wear Compensating Seal) system ensuring long life and fast response, making it ideally suited for OEM applications. Specifications Basic Series: B5 - B5 Series Operator function: G - Single solenoid, 2-position NC - air return Overrides: C - Flush - locking Voltage: 49 - 24 DC Engineering level: C - Current Port Size / Thread Type: 1 - 1/4" NPT inline Pilot Source / Pilot Exhaust: A - Internal - port #1 / tapped M5 Enclosure / lead length: F - Hazardous duty 1/2" NPT conduit - 18" leads

GHG6231101R1007, price Range $1100 - $1900. UNUSED Tamper-Proof Encapsulated Circuit Breakers. Breaker, Tamper Proof, Encapsulated, 30A, 1P, 277VAC, 10kAIC Eaton's Crouse-Hinds GHG 623 tamper-proof encapsulated breakers provide maximum safety for your facility and feature the proven reliability of Eaton Cutler-Hammer breakers. Provide overcurrent and short circuit protection for low voltage power, lighting and heat tracing applications in hazardous locations, such as refineries, chemical and petrochemical plants, mining, food processing, corrosive and industrial processing facilities. GHG6231101R1007 BREAKER TAMPER PROOF 30A 1 POLE 277VAC 10KAIC

550J18NC Flexco 550 Belt Hinged Fastener - STEEL Joint with Nylon Covered STEEL Cable - 40138 - 18" Belt Width. Sturdy hinged construction makes Flexco® Bolt Hinged fasteners ideal. A choice of sizes accommodate belts from 1/4" (6 mm) to 5/8" (16 mm) thick. For belt conveyor applications subject to frequent length adjustments, the Bolt Hinged fastener is easy to install - and re-install. The joint can be separated simply by removing the hinge pin. On-site installation requires hand or power tools. Our exclusive piloted bolt also simplifies installation and holds fastener plates firmly in place. For added strength and pull-out resistance, specially formed teeth penetrate deep into the belt carcass without damaging carcass fibers. 2 Fastener Strips 1 Gauge Pin 1 Hinge Pin 2 Hinge Pin Washers Filler Tubing Required Piloted Bolts, Nuts, and Clips

three UNUSED, Cisco IE 3000 Expansion Module, 8 10/100 IEM-3000-8TM, One Sells For $1500-$2200 on the internet. We are selling (3) PLUs (2) Smart Hart Temp Transmitters that sell for $150 Each.

Gauges and More! If you cannot make money with this lot, get another hobby.

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

$200+ The nVent RAYCHEM S-150 is a cold-applied, low-profile splice for in-line connection. It is designed for use with the following nVent RAYCHEM brand heating cables: BTV, QTVR, and XTV. Use the S-150 in applications with temperatures ranging from –60°F to 420°F (–50°C to 215°C). It is approved by FM,CSA and Dekra for use in hazardous locations. The unique design of the S-150 suits the demanding requirements of the industrial environment. The low-profile housing can be installed on pipes and other surfaces. Springloaded grommets make a first seal to maintain a watertight connection, while the noncuring silicone-free sealant used in the nVent RAYCHEM cold-applied core sealers add a second seal, providing additional protection. The rugged construction makes it resistant to impact and suitable for high-temperature and chemical exposure. The splice requires no heat source for installation, and it is re-enterable, making maintenance fast and easy. Each kit contains all the necessary materials to do one in-line splice. Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT Ingress protection Type 4X (IP66) Minimum installation temperature –40°F (–40°C) Minimum usage temperature –60°F (–50°C) Maximum pipe temperature 420°F (215°C) Connection method Screw terminals Maximum operating voltage 277 Vac for FM, CSA 254 Vac for PTB Maximum circuit breaker rating 50 A for FM, CSA 40 A for PTB

Kits.

Mic Trc 233856, unused. go price these downtown

TS3110D2E, T-Series enclosure heaters are designed with standard redundant internal protection for long trouble free operation. The T-Series heater provides approved hazardous area heaters for a wide range of applications from instrument freeze protection to temperature maintenance for analytical applications. The system is highly configurable and includes redundant internal protection for long trouble free operation. Study Your Lessons

Container.

Container.

Container.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

Study Your Lessons. Hatfield and Company, Houston.

K&H 15-Watt Mighty Tent Light Hand Lamp Light Assembly 1525-ML / 25 ft.cord Study Your Lessons! Nice Work Light

K&H 15-Watt Mighty Tent Light Hand Lamp Light Assembly 1525-ML / 25 ft.cord Study Your Lessons! Nice Work Light

we think there are two units in this lot. 36" each unit sell for $1780 each. water, sewer, oil.

HDT makes the most advanced expeditionary shelters that feature inherent energy efficient characteristics. The HDT Shade Fly provides an additional layer of solar protection, reducing shelter interior temperatures and temperature gradients, and lowering fuel consumption associated with environmental control. The Shade Fly is modular and can be scaled to fit various shelter models. Shock-cord poles made of 7075 aluminum for strength, durability and crush-resistance support the Shade Fly fabric. Each section of the pole is no more than 63" for easy storage and transportation. Use of the Shade Fly with HDT Shelters has proved to reduce internal shelter temperatures 10 – 18°F also included: HDT VESTIBULE FLY - TENT HDT 60 SF03 Temper Vestibule Panel

HDT makes the most advanced expeditionary shelters that feature inherent energy efficient characteristics. The HDT Shade Fly provides an additional layer of solar protection, reducing shelter interior temperatures and temperature gradients, and lowering fuel consumption associated with environmental control. The Shade Fly is modular and can be scaled to fit various shelter models. Shock-cord poles made of 7075 aluminum for strength, durability and crush-resistance support the Shade Fly fabric. Each section of the pole is no more than 63" for easy storage and transportation. Use of the Shade Fly with HDT Shelters has proved to reduce internal shelter temperatures 10 – 18°F also included: HDT VESTIBULE FLY - TENT HDT 60 SF03 Temper Vestibule Panel

Replacement Value. All Are Unused. incl. Model # C32TLAZ6-MK1-S60T-SPPZ5

Replacement Value. 32-632-24, Unused. $438.00 For ONE! We are selling a CASE of FOUR! List: $657.00 For ONE! We are selling a CASE of FOUR! 2.5" Height x 2.5" Width x 38" Length oxygen 1-33W Integrated LED-Type Bulb, Dimmable ZEPP PENDANT LIGHT DIMENSIONS: 2.5" Height x 2.5" Width x 38" Length LIGHT: 33 Watt Integrated Led Base 120-277Volt, LED Bulb, Dimmable (3000K, 90CRI), Bulbs Included. Investment Opportunity. BE ON TOP!

Replacement Value. 32-632-24, Unused. $438.00 For ONE! We are selling a CASE of FOUR! List: $657.00 For ONE! We are selling a CASE of FOUR! 2.5" Height x 2.5" Width x 38" Length oxygen 1-33W Integrated LED-Type Bulb, Dimmable ZEPP PENDANT LIGHT DIMENSIONS: 2.5" Height x 2.5" Width x 38" Length LIGHT: 33 Watt Integrated Led Base 120-277Volt, LED Bulb, Dimmable (3000K, 90CRI), Bulbs Included. Investment Opportunity. BE ON TOP!

Replacement Value. 32-632-24, Unused. $438.00 For ONE! We are selling a CASE of FOUR! List: $657.00 For ONE! We are selling a CASE of FOUR! 2.5" Height x 2.5" Width x 38" Length oxygen 1-33W Integrated LED-Type Bulb, Dimmable ZEPP PENDANT LIGHT DIMENSIONS: 2.5" Height x 2.5" Width x 38" Length LIGHT: 33 Watt Integrated Led Base 120-277Volt, LED Bulb, Dimmable (3000K, 90CRI), Bulbs Included. Investment Opportunity. BE ON TOP!

Replacement Value. 32-632-24, Unused. $438.00 For ONE! We are selling a CASE of FOUR! List: $657.00 For ONE! We are selling a CASE of FOUR! 2.5" Height x 2.5" Width x 38" Length oxygen 1-33W Integrated LED-Type Bulb, Dimmable ZEPP PENDANT LIGHT DIMENSIONS: 2.5" Height x 2.5" Width x 38" Length LIGHT: 33 Watt Integrated Led Base 120-277Volt, LED Bulb, Dimmable (3000K, 90CRI), Bulbs Included. Investment Opportunity. BE ON TOP!

Replacement Value. 32-632-24, Unused. $438.00 For ONE! We are selling a CASE of FOUR! List: $657.00 For ONE! We are selling a CASE of FOUR! 2.5" Height x 2.5" Width x 38" Length oxygen 1-33W Integrated LED-Type Bulb, Dimmable ZEPP PENDANT LIGHT DIMENSIONS: 2.5" Height x 2.5" Width x 38" Length LIGHT: 33 Watt Integrated Led Base 120-277Volt, LED Bulb, Dimmable (3000K, 90CRI), Bulbs Included. Investment Opportunity. BE ON TOP!

Replacement Value. 32-632-24, Unused. $438.00 For ONE! We are selling a CASE of FOUR! List: $657.00 For ONE! We are selling a CASE of FOUR! 2.5" Height x 2.5" Width x 38" Length oxygen 1-33W Integrated LED-Type Bulb, Dimmable ZEPP PENDANT LIGHT DIMENSIONS: 2.5" Height x 2.5" Width x 38" Length LIGHT: 33 Watt Integrated Led Base 120-277Volt, LED Bulb, Dimmable (3000K, 90CRI), Bulbs Included. Investment Opportunity. BE ON TOP!

part # PEU-156/E. 25KW, TSL has developed a line of ruggedized AC Power Distribution Panels (PDPs), designed to meet the field requirements of military service. The TSL Model 1090 PDPs are portable, and the smaller sizes can be easily handled by one person.

part # PEU-156/E. 25KW, TSL has developed a line of ruggedized AC Power Distribution Panels (PDPs), designed to meet the field requirements of military service. The TSL Model 1090 PDPs are portable, and the smaller sizes can be easily handled by one person.

Unused, $8000+ Selling on Other Auction Platforms, Dealers $18,000. 5430-01-479-5116 50,000 Gallon Collapsible Fuel/Water Tank. each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit we have 22 units. Coated nylon cloth fabric bladder tanks provide handy on-site temporary liquid storage, yet are durable enough to use over and over! Berm liner is included in crate. Short or long term storage for liquid. Heavy duty, U.S. Government Issue. Fold for extremely compact storage between uses. Ready to go, never used. each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit Fuel bladder storage tanks ideal for temporary storage of diesel fuel, oils, and other hydrocarbon based petroleum products. These 50,000 gallon storage bladders are collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Interstate Products Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable fuel bladder tanks are designed to outperform and outlast the competition. Fuel bladder tanks are ideal for fuel depos and refueling stations in hard to reach locations or temporary staging areas. 50,000 Gallon Fuel Storage Bladder Fabric Specifications • Collapsible, flexible storage tanks provide temporary or long term storage of liquids. • Useful for oil spill recovery, bulk liquid, water storage, jet fuel storage, and diesel fuel storage. • These containers are designed for land based operations. • great for diesel fuel or Jet A. Contact us for additional information on alternative fuels or blended fuel storage applications. For storage of diesel, gasoline, jet fuels, JP 8, and more, look no further than our flexible 50,000 Gallon Fuel Storage Bladders.

Unused, $8000+ Selling on Other Auction Platforms, Dealers $18,000. 5430-01-479-5116 each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit 50,000 Gallon Collapsible Fuel/Water Tank. Coated nylon cloth fabric bladder tanks provide handy on-site temporary liquid storage, yet are durable enough to use over and over! Berm liner is included in crate. Short or long term storage for liquid. Heavy duty, U.S. Government Issue. Fold for extremely compact storage between uses. Ready to go, never used. Fuel bladder storage tanks ideal for temporary storage of diesel fuel, oils, and other hydrocarbon based petroleum products. These 50,000 gallon storage bladders are collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Interstate Products Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable fuel bladder tanks are designed to outperform and outlast the competition. Fuel bladder tanks are ideal for fuel depos and refueling stations in hard to reach locations or temporary staging areas. 50,000 Gallon Fuel Storage Bladder Fabric Specifications • Collapsible, flexible storage tanks provide temporary or long term storage of liquids. • Useful for oil spill recovery, bulk liquid, water storage, jet fuel storage, and diesel fuel storage. • These containers are designed for land based operations. • great for diesel fuel or Jet A. Contact us for additional information on alternative fuels or blended fuel storage applications. For storage of diesel, gasoline, jet fuels, JP 8, and more, look no further than our flexible 50,000 Gallon Fuel Storage Bladders.

Unused, $8000+ Selling on Other Auction Platforms, Dealers $18,000. 5430-01-479-5116 each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit 50,000 Gallon Collapsible Fuel/Water Tank. Coated nylon cloth fabric bladder tanks provide handy on-site temporary liquid storage, yet are durable enough to use over and over! Berm liner is included in crate. Short or long term storage for liquid. Heavy duty, U.S. Government Issue. Fold for extremely compact storage between uses. Ready to go, never used. each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit Fuel bladder storage tanks ideal for temporary storage of diesel fuel, oils, and other hydrocarbon based petroleum products. These 50,000 gallon storage bladders are collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Interstate Products Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable fuel bladder tanks are designed to outperform and outlast the competition. Fuel bladder tanks are ideal for fuel depos and refueling stations in hard to reach locations or temporary staging areas. 50,000 Gallon Fuel Storage Bladder Fabric Specifications • Collapsible, flexible storage tanks provide temporary or long term storage of liquids. • Useful for oil spill recovery, bulk liquid, water storage, jet fuel storage, and diesel fuel storage. • These containers are designed for land based operations. • great for diesel fuel or Jet A. Contact us for additional information on alternative fuels or blended fuel storage applications. For storage of diesel, gasoline, jet fuels, JP 8, and more, look no further than our flexible 50,000 Gallon Fuel Storage Bladders.

Unused, $8000+ Selling on Other Auction Platforms, Dealers $18,000. 5430-01-479-5116 each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit 50,000 Gallon Collapsible Fuel/Water Tank. Coated nylon cloth fabric bladder tanks provide handy on-site temporary liquid storage, yet are durable enough to use over and over! Berm liner is included in crate. Short or long term storage for liquid. Heavy duty, U.S. Government Issue. Fold for extremely compact storage between uses. Ready to go, never used. each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit Fuel bladder storage tanks ideal for temporary storage of diesel fuel, oils, and other hydrocarbon based petroleum products. These 50,000 gallon storage bladders are collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Interstate Products Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable fuel bladder tanks are designed to outperform and outlast the competition. Fuel bladder tanks are ideal for fuel depos and refueling stations in hard to reach locations or temporary staging areas. 50,000 Gallon Fuel Storage Bladder Fabric Specifications • Collapsible, flexible storage tanks provide temporary or long term storage of liquids. • Useful for oil spill recovery, bulk liquid, water storage, jet fuel storage, and diesel fuel storage. • These containers are designed for land based operations. • great for diesel fuel or Jet A. Contact us for additional information on alternative fuels or blended fuel storage applications. For storage of diesel, gasoline, jet fuels, JP 8, and more, look no further than our flexible 50,000 Gallon Fuel Storage Bladders.

Unused, $8000+ Selling on Other Auction Platforms, Dealers $18,000. 5430-01-479-5116 each unit is 94"L x 45"w x 45"h weight is 1640 lbs each unit 50,000 Gallon Collapsible Fuel/Water Tank. Coated nylon cloth fabric bladder tanks provide handy on-site temporary liquid storage, yet are durable enough to use over and over! Berm liner is included in crate. Short or long term storage for liquid. Heavy duty, U.S. Government Issue. Fold for extremely compact storage between uses. Ready to go, never used. Fuel bladder storage tanks ideal for temporary storage of diesel fuel, oils, and other hydrocarbon based petroleum products. These 50,000 gallon storage bladders are collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Interstate Products Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable fuel bladder tanks are designed to outperform and outlast the competition. Fuel bladder tanks are ideal for fuel depos and refueling stations in hard to reach locations or temporary staging areas. 50,000 Gallon Fuel Storage Bladder Fabric Specifications • Collapsible, flexible storage tanks provide temporary or long term storage of liquids. • Useful for oil spill recovery, bulk liquid, water storage, jet fuel storage, and diesel fuel storage. • These containers are designed for land based operations. • great for diesel fuel or Jet A. Contact us for additional information on alternative fuels or blended fuel storage applications. For storage of diesel, gasoline, jet fuels, JP 8, and more, look no further than our flexible 50,000 Gallon Fuel Storage Bladders.

$3817 Wholesale Cost. Below Ground Box, By QUAZITE Catalog ID: PG3660BA36. Ours HAVE LIDS, LIDS are Sold Separately and Not Included in the $3817 Price! Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037100049 Dimensions Dimensions 60 in x 36 in x 36 in Height 36 in Length 60 in Weight 585 lb Width 36 in

$2695 Wholesale Cost EACH (without Lid! Ours has Lids Included!) UNUSED. Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. You Are Buying (2) Boxes each with a LID! OVER $6000 in Replacement Cost! By QUAZITE Catalog ID: PG3660BA24 Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037100025 Dimensions Dimensions 60 in x 36 in x 24 in Height 24 in Length 60 in Weight 422 lb Width 36 in We Will Load you For Free!

$2695 Wholesale Cost EACH (without Lid! Ours has Lids Included!) UNUSED. Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. You Are Buying (2) Boxes each with a LID! OVER $6000 in Replacement Cost! By QUAZITE Catalog ID: PG3660BA24 Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037100025 Dimensions Dimensions 60 in x 36 in x 24 in Height 24 in Length 60 in Weight 422 lb Width 36 in We Will Load you For Free!

$2695 Wholesale Cost EACH (without Lid! Ours has Lids Included!) UNUSED. Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. You Are Buying (2) Boxes each with a LID! OVER $6000 in Replacement Cost! By QUAZITE Catalog ID: PG3660BA24 Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037100025 Dimensions Dimensions 60 in x 36 in x 24 in Height 24 in Length 60 in Weight 422 lb Width 36 in We Will Load you For Free!

$2695 Wholesale Cost EACH (without Lid! Ours has Lids Included!) UNUSED. Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. You Are Buying (2) Boxes each with a LID! OVER $6000 in Replacement Cost! By QUAZITE Catalog ID: PG3660BA24 Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037100025 Dimensions Dimensions 60 in x 36 in x 24 in Height 24 in Length 60 in Weight 422 lb Width 36 in We Will Load you For Free!

TWO (2) Polymer Concrete Underground Enclosures, Below Ground Box, UNUSED, Cost $2245 (without the LID! Ours has the Lid Included!) By QUAZITE. You are buying TWO Boxes with TWO Lids. We will Load you for Free! UNUSED, NEW! Over $5000 in Replacement Cost! Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

TWO (2) Polymer Concrete Underground Enclosures, Below Ground Box, UNUSED, Cost $2245 (without the LID! Ours has the Lid Included!) By QUAZITE. You are buying TWO Boxes with TWO Lids. We will Load you for Free! UNUSED, NEW! Over $5000 in Replacement Cost! Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

TWO (2) Polymer Concrete Underground Enclosures, Below Ground Box, UNUSED, Cost $2245 (without the LID! Ours has the Lid Included!) By QUAZITE. You are buying TWO Boxes with TWO Lids. We will Load you for Free! UNUSED, NEW! Over $5000 in Replacement Cost! Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

TWO (2) Polymer Concrete Underground Enclosures, Below Ground Box, UNUSED, Cost $2245 (without the LID! Ours has the Lid Included!) By QUAZITE. You are buying TWO Boxes with TWO Lids. We will Load you for Free! UNUSED, NEW! Over $5000 in Replacement Cost! Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

TWO (2) Polymer Concrete Underground Enclosures, Below Ground Box, UNUSED, Cost $2245 (without the LID! Ours has the Lid Included!) By QUAZITE. You are buying TWO Boxes with TWO Lids. We will Load you for Free! UNUSED, NEW! Over $5000 in Replacement Cost! Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

Polymer Concrete. Underground Enclosure, Below Ground Box, UNUSED, Cost $2245 Each (without the LID! Ours has the Lid Included!) By QUAZITE. OVER $25,000 in Replacement Cost. Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

Polymer Concrete. Underground Enclosure, Below Ground Box, UNUSED, Cost $2245 Each (without the LID! Ours has the Lid Included!) By QUAZITE. OVER $25,000 in Replacement Cost. Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

Polymer Concrete. Underground Enclosure, Below Ground Box, UNUSED, Cost $2245 Each (without the LID! Ours has the Lid Included!) By QUAZITE. OVER $25,000 in Replacement Cost. Catalog ID: PG3048BA36 Quazite ANSI/SCTE 77 certified enclosure boxes, feature a high quality polymer concrete construction. Stronger and lighter weight than regular concrete Cost effective Durable and long lasting Fire and chemical resistant Standard sizes are UL certified ANSI/SCTE77 certified. Load Rating (ANSI Tier) T22 Material Polymer Concrete Type Below Ground Boxes UPC 662037117672 Weight Load Rating 33,750 lb Dimensions Dimensions 48 in x 30 in x 36 in Height 36 in Length 48 in Weight 376.95 lb Width 30 in

Component. See Contents, In Water Tight Metal Container. 20,000 Gallon, JGB 20K 20,000 Gallon Collapsible Fuel Tank is constructed of impregnated fabric and equipped with two 4-inch hose connections and a single vapor vent. The 20,000 Gallon Collapsible Tank assembly includes an aluminum storage chest and associated components.

your are buying ONE!

your are buying ONE!

your are buying ONE!

your are buying ONE!

your are buying ONE!

your are buying ONE!

your are buying ONE!

your are buying ONE!

your are buying ONE!

1.5"

expansion coupler

Electrical Fittings (UNUSED), Your Price: $328.57 / ea. Appleton TMC2X-150190AX Tmc2X Cable Gl Alum 1-1/2" W/ Resin METAL CLAD CABLE CONNECTOR, TYPE 2-PIECE, STRAIGHT, HUB SIZE 1-1/2 INCH, THROAT TYPE BUSHING, GLAND NUT, CABLE TYPE JACKETED METAL CLAD, CABLE SIZE 1.57 TO 1.9 INCH, DIAMETER 2.82 INCH, LENGTH 4.62 INCH, CONSTRUCTIONAL FEATURE EXPLOSIONPROOF, DUST-IGNITIONPROOF, WATERTIGHT, MATERIAL COPPER FREE ALUMINUM (BODY/SLEEVE/GLAND NUT), STAINLESS STEEL (GROUNDING SPRING), HALOGEN FREE LSF-TPE (BUSHING), NYLON (END STOP WASHER), APPLICATION HAZARDOUS LOCATION, APPROVAL UL 514B/2225, CSA C22.2, ENCLOSURE TYPE CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 AEX D IIC AEX E II AEX TA IIC, CLASS I ZONE 1 EX E II EX TA IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III DIV 1 AND 2, NEMA 4X, IP66, CONTINUOUS OPERATING TEMPERATURE -60 TO 85 DEG C, MINIMUM THREAD LENGTH 1.03 INCH

wholesale. (cable size 1.375"--1.625") Crouse-Hinds CGFP6913 2" 1.375-1.625 Connector Technical Description: Lot Value $$4080 Straight Male Type; Rugged Electrogalvanized Aluminum Acrylic Painted Feraloy. Body/Gland Nut, Neoprene Bushing Material; 3-1/4 Inch Dia X 4-1/4 Inch L Size; UL 514-B Approval; Wet Location Application; 2 Inch Thread Size; 1.375 to 1.625 Inch Cord Size UPC: 78227415380 Part Number: CGFP6913 ($204.00 / ea)

wholesale. APPLETON Appleton TC150150 AL TRAY CBL CONNECTOR Tray Cable Connector, Explosion-Proof, Size 1-1/2" some websites are $121 EACH! Lot Value $8670-$10,285. Appleton™ TC Cable Connectors are suitable for use with type (TC) tray cable and flex cord in ordinary, wet and hazardous locations including Class I, Division 2 (where permitted by code), Class I, Zone 1 AEx e and Ex e (where permitted by code). They offer ingress protection to NEMA 4X and IP66/67/68 For Tray Cable and Flex Cord in Ordinary, Wet and Hazardous Locations Conductor Size 34.8 - 38.1 mm Material Aluminum TC Connection MNPT Temperature Rating -60 to 110 C Thread Length 1.03 in Thread Type NPT Trade Size 1-1/2 Inch

cable size .92" - 1.27", Electrical Fittings (UNUSED) TC-150127, Appleton TC150127 Tc Cable Tray Connector 1" Alum. Tray Cable Connector, 1-1/2 Inch, 1.10 -1.27 Inch Diameter, Aluminum, Suitable For Use With Type TC Cable and Flex Cord in Ordinary, Wet and Hazardous Locations

NPT, Appleton TMC2X-150162A Tmc2X Cable Gl Alum 1-1/2" W/ Resin. (UNUSED) Wholesale Value = $12,136.

1.5" NPT, Appleton TMC2-150162A 2-1/2" Alum Mc Connector Technical Description: UNUSED Wholesale Value for the Lot = $5500 Copper-Free Aluminum (Body/Sleeve/Gland Nut), Stainless Steel (Grounding Spring), Halogen Free Lsf-TPE (Bushing), Nylon (End Stop Washer), Viton (O-ring) Material; 3.47 Inch UPC: 78138122109 Part Number: TMC2-150162A Manufacturer: APPLETON

Your Wholesale Price: $18.30 / ea, Lot Value = $1281.00

($68.34 / ea) Appleton TMC2-075099NB Mc Cable Gland. Brand Name: Appleton Temperature Rating: -60 To 110 DEG C Type: TMC2 Series Cable Gland Connector Connection: NPT Enclosure: IP66 Finish: Nickel Material: Copperfree Brass NEMA Rating: NEMA 4X Size: 3/4 IN Special Features: TMC2 connectors provide a means for terminating jacketed type MC cable, forming a mechanical watertight connection and providing ground continuity for cable armor; Simplified two piece design; Integral o-ring face seal providing - 4X and IP66; Independent sealing and armor clamping; True 360 DEG grounding; Removable cable armor end stop accommodates larger insulated conductors; Superior pull out prevention; Compact slim profile; Reduced installation time (no disassembly required); Widest cable acceptance range; Re-usable design; Additional integral deluge proof seal for protection in extreme offshore and onshore environments; Stainless steel grounding spring; LSF-TPE (halogen free) bushing; Nylon end stop washer; Viton o-ring

Wholesale EACH! Lot Value = $6104. UNUSED Appleton™ TMC2 Connectors are designed for use with MC/MC-HL, corrugated interlocked aluminum/steel armor or continuously welded armor (TECK or CLx) cables. They are used to provide a means for terminating jacketed type MC cable, forming a mechanical watertight connection and providing ground continuity for cable armor. Applications For Jacketed Metal Clad, MC/MC-HL, Corrugated Interlocked Aluminum/Steel Armor, Continuously Welded Armor Cable Enclosure IP66 Material Aluminum Size 1-1/2 IN TC Connection NPT Temperature Rating -60 to 110 C

Appleton TMC2-100118A Mc Cable Gland. $2321 wholesale Your Price: $74.87 / ea Catalog Number: TMC2-100118A Model: TMC2 Trade Size: 1 Inch Threaded Cable Type: Jacketed Metal Clad, MC/MC-HL, Corrugated Interlocked Aluminum/Steel Armor, Continuously Welded Armor Cable Size: 0.87 to 1.18 Inch Diameter: 1.95 Inch Length: 3.11 Inch Material: Copper-Free Aluminum (Body/Sleeve/Gland Nut), Stainless Steel (Grounding Spring), Halogen Free LSF-TPE (Bushing), Nylon (End Stop Washer), Viton (O-Ring) CATALOG DESCRIPTION: TMC2 SERIES CABLE GLAND CONNECTOR, SIZE: 1 IN, MATERIAL: COPPERFREE ALUMINUM, ENCLOSURE: IP66, NEMA RATING: NEMA 4X, TEMPERATURE RATING: -60 TO 110 DEG C, CONNECTION: NPT, DIMENSIONS: 1.81 IN ACROSS FLAT X 1.95 IN ACROSS CORNER X 3.1 Category: Bx, Mc, Armored Cable Fittings Full Technical Description: Copper-Free Aluminum (Body/Sleeve/Gland Nut), Stainless Steel (Grounding Spring), Halogen Free Lsf-TPE (Bushing), Nylon (End Stop Washer), Viton (O-ring) Material; 3.11 Inch; Jacketed Metal Clad, Mc/Mc-Hl, Corrugated Interlocked Aluminum/Steel Armor, Continuously Welded Armor Cable Type; 0.87 to 1.18 Inch Cable Size; UL 514B/2225, CSA C22.2, CSA (Canada and Us) Approval; Hazardous Location Application; 1.95 Inch Diameter; 1 Inch Threaded Trade Size; Type Straight, 2-Piece, Threaded; Throat Type O-ring, Bushing, Gland Nut; Constructional Feature Water Tight; Cable Armor Diameter 0.42 to 0.63 Inch; Enclosure Type NEMA 4X, IP66; Applicable Standard ATEX, IEC, Nec/Cec; Continuous Operating Temperature -76 to 230 Deg F; TMC2 Model

Electrical Fittings (UNSED)