SKAGIT HYDRAULICS - ONLINE AUCTION
SKAGIT HYDRAULICS - ONLINE AUCTION
James G. Murphy Co. | Burlington, WA 98233
Date(s) :  9/19/2024 - 9/26/2024
Buyer Premium :  13%


Online Only Auction
Start Date: 10:00 AM | Thursday - September 19 End Date: 10:00 AM | Thursday - September 26
Hydraulic Repair & Retail
1 BUX SHRADER 1-2RP
MAG DRILL, 120V
2 ROTTLER DA-0
PORTABLE CYLINDER BORING BAR, 120V
3 ENERPAC PER-3032A HUSHH-PUMP
HYDRAULIC PUMP W/ASSORTED RAMS, HOSES, PENDANT CONTROL & PNEUMATIC FOOT CONTROL, 1-1/2 HP, 120V
4 THOMAS INDUSTRIES HA-1-ES
NOVOPRESS HYDRAULIC PUMP W/FOOT CONTROL, 120V
5 REHAV R
MECHANICAL HYDRAULIC COMPRESSION TOOL W/CASE & ACCESSORIES
6 REHAV R
MECHANICAL HYDRAULIC COMPRESSION TOOL W/CASE & ACCESSORIES
7 MECHANICAL HYDRAULIC COMPRESSION TOOL W/CASE
8 MECHANICAL HYDRAULIC COMPRESSION TOOL W/CASE
9A BRIGGS & STRATTON WEEDEATER ONE 875 SERIES
190 CC GAS ENGINE, 8.75 FT LBS TORQUE (UNUSED)
9B BRIGGS & STRATTON WEEDEATER ONE 875 SERIES
190 CC GAS ENGINE, 8.75 FT LBS TORQUE (UNUSED)
9C PREDATOR 69731
173 CC VERTICAL SHAFT GAS ENGINE (UNUSED)
10 MAGNA-SPOT 1500
SPOT WELDER W/CASE & ACCESSORIES, 120V
11 CHICAGO WELDING 98357
DENT REPAIR STUD WELDER UNIT
12 BOSCH 0611
ELECTRIC JACK HAMMER W/CASE, 120V
13 TWINCUT POWER SAW 06-00002
5" METAL SAW W/CASE, 120V
14 LOT, (1) HITACHI 7-9" ANGLE GRINDER & (1) MAKITA
GA4030 4" ANGLE GRINDER W/CASE & ACCESSORIES
15 LOT, MISC POWER TOOLS IN THIS CRATE
16 EARTHQUAKE XT
3/4" PNEUMATIC IMPACT WRENCH
17 SNAP-ON MG725
1/2" PNEUMATIC IMPACT WRENCH
18 SNAP-ON
1/2" PNEUMATIC IMPACT WRENCH
19 SNAP-ON
1/2" PNEUMATIC IMPACT WRENCH
20 SNAP-ON FAR72C
3/8" PNEUMATIC RATCHET
21 BLUE POINT
3/8" PNEUMATIC RATCHET
22 SNAP-ON PTGR400
PNEUMATIC DIE GRINDER
23 LOT, (2) ASSORTED MAC TOOLS DIE GRINDERS
24 SNAP-ON GA-185
TORQUE MULTIPLIER
25 SNAP-ON QSR-4400
3/4" DRIVE TORQUE WRENCH, 50-400 FT LB
26 LOT, ASSORTED SNAP-ON 2" DRIVE RATCHETS &
ACCESSORIES
27 LOT, ASSORTED SNAP-ON 3/4" & 1" DRIVE RATCHETS,
SOCKETS & EXTENSIONS IN THIS SECTION
28 LOT, ASSORTED 3/4" & 1" DRIVE RATCHETS & SOCKETS
IN THIS BUCKET
29 LOT, ASSORTED SNAP-ON, PROTO & MAC TOOLS SOCKETS
& EXTENSIONS IN THIS BIN
30 LOT, ASSORTED SNAP-ON TOOLS IN THIS BUCKET
31 LOT, (3) ASSORTED SNAP-ON TAP SETS
32 SNAP-ON SRPC112
SNAP RING PLIERS SET
33 LOT, ASSORTED CRESCENT WRENCHES IN THIS BIN
34 LOT, ASSORTED SNAP-ON HAMMERS IN THIS BUCKET
35 LOT, ASSORTED PNEUMATIC TOOLS IN THIS BIN
36 KOZYVAC TA500
2-STAGE VACUUM PUMP, 1/2 HP, 5.0 CFM, 120V
37 ONYX WINDKO
PNEUMATIC WINDSHIELD REMOVER W/(3) BLADES (UNUSED)
38 5" MULTI-PURPOSE BENCH
39 LOT, (3) ASSORTED CHAIN WRENCHES IN THIS SECTTION
40 RIDGID
48" PIPE WRENCH
41 LOT, ASSORTED END WRENCHES IN THIS BUCKET
42 LOT, ASSORTED C-CLAMPS IN THIS BUCKET
43 LOT, ASSORTED RIDGID PIPE THREADING DIES IN THIS
CRATE
44 LOT, ASSORTED 3/4" & 1" DRIVE SOCKETS & (1)
CORNWELL 3/4" DRIVE RATCHET IN THIS SECTION (SOME SOCKETS HAVE BEEN MODIFIED)
45 LOT, ASSORTED ADJUSTABLE SPANNER WRENCHES IN THIS
DRAWER
46 LOT, ASSORTED TUBE FLARING KITS IN THIS DRAWER
47 LOT, ASSORTED PULLERS IN THIS DRAWER
48 LOT, ASSORTED ALLEN WRENCHES & SOCKETS IN THIS
DRAWER
49 LOT, ASSORTED SNAP-ON & CRAFTSMAN END WRENCHES IN
THIS DRAWER
50 LOT, ASSORTED FILES & PUNCHES IN THIS DRAWER
51 LOT, ASSORTED SNAP-ON & MISC OFFSET END WRENCHES
IN THIS DRAWER
52 LOT, ASSORTED SNAP-ON & MISC TAPS & CROWS FOOTS
IN THIS DRAWER
53 LOT, ASSORTED TAPS & DIES IN THIS DRAWER
54 LOT, ASSORTED TOOLING IN THIS CABINET (BACK SIDE
OF TOOLBOX)
55 LOT, ASSORTED THREAD REPAIR KITS IN THIS DRAWER
57A SNAP-ON
50"L X 27-1/2"W X 39"H 13-DRAWER, SINGLE CABINET TOOLBOX W/CONTENTS OF REMAINING DRAWERS (NO KEY)
57B HOMAK
41"L X 18"W X 54"H 16-DRAWER, SINGLE CABINET TOOLBOX W/KEYS
58 CRAFTSMAN
26"L X 12-1/2"W 10-DRAWER TOP BOX W/CONTENTS
59 CRAFTSMAN
26"L X 12-1/2"W 10-DRAWER TOP BOX W/CONTENTS
60 LOT, ASSORTED TOOLS IN THIS BIN
61 LOT, ASSORTED TOOLS IN THIS BIN
62 LOT, ASSORTED ALLEN WRENCHES IN THIS BIN
63 LOT, ASSORTED TOOLING IN THIS BIN
64 LOT, ASSORTED TUBING BENDERS IN THIS SECTION
71 MILLER MJ-65E
CONSTANT POTENTIAL DC ARC WELDING POWER SOURCE W/MILLER 22A 24V WIRE FEED, WHIP & GROUND, 230/480V, 3 PHASE SERIAL NUMBER: HJ112189
72 HOBART FABSTAR 2620
CONSTANT VOLTAGE DC WELDING POWER SOURCE W/HOBART 2000 WIRE FEED, WHIP, GROUND, REGULATOR & HOOD, 230/460V, 3 PHASE SERIAL NUMBER: N/A
73 AVEY 3
2 HP DRILL PRESS, 24" X 24" T-SLOT TABLE, 440V, 3 PHASE SERIAL NUMBER: 25028
74 ORBIT MACHINE TOOLS OR-1758
PEDESTAL MOUNTED 12-SPEED INDUSTRIAL DRILL PRESS, 5/8" CHUCK, 1/2 HP, 110/220V, SINGLE PHASE
75 CANNEDY OTTO MFG
HYDRAULIC RADIAL ARM DRILL PRESS, 34" SIDE & VISE (CUSTOMER RESPONSIBLE TO DISCONNECT & CAP HYDRAULIC LINES AT THE END OF HARD LINE, NO POWER UNIT)
76 TOOLMEX TUR630A
150" X 26" SWING LATHE, 5-1/2" THRU-SPINDLE, (2) 15-1/2" 3-JAW CHUCKS, TOOL POST, (6) TOOL HOLDERS, (2) STEADY RESTS, TAIL STOCK, FOLLOWER, INDEXER, HYDRAULIC DRILL ATTACHMENT W/JACOBS TAPER, 440V, 30A, 3 PHASE (RIGGER IS REQUIRED FOR REMOVAL) SERIAL NUMBER: 50359
77 19-1/2" 4-JAW CHUCK
78 VOEST
80" X 18" SWING LATHE, 2" THRU-SPINDLE, 10" 3-JAW CHUCK, TOOL POST, (2) STEADY RESTS, TAIL STOCK, (1) 10" 4-JAW CHUCK & (1) 6-1/2" 3-JAW CHUCK, 220/480V, 3 PHASE (REMOVAL BY APPT ONLY) SERIAL NUMBER: 4088
79 BROWN & SHARPE NO. 2 PLAIN
HORIZONTAL MILLING MACHINE, 10" X 45" BED, 220/480V SERIAL NUMBER: 5645
80 6" MACHINE VISE W/HANDLE
81 200
8" ROTARY MACHINE VISE (NO HANDLE)
82 LOT, ASSORTED KEYWAY BROACH SETS IN THIS SECTION
83 LOT, (2) ASSORTED HASSAY SAVAGE KEYWAY BROACH
SETS
84 LOT, ASSORTED COLLETS IN THIS SECTION
85A LOT, ASSORTED DRILL BITS ON THIS PALLET
85B LOT, ASSORTED TOOLING ON THIS PALLET
86 CUSTOM BUILT
HYDRAULIC PUMP TEST BENCH W/ASSORTED FITTINGS & HOSE, 50 HP, 230/460V, 3 PHASE (HARD WIRED, CUSTOMER IS RESPONSIBLE TO DISCONNECT ELECTRICAL AT FIRST JOINT)
87 CUSTOM BUILT
32" X 36" HYDRAULIC PRESS W/ASSORTED ACCESSORIES (CUSTOMER RESPONSIBLE TO DISCONNECT & CAP HYDRAULIC LINES AT FLOOR, NO HYDRAULIC PUMP)
88 CUSTOM BUILT
30" X 100" HYDRAULIC TEST BENCH W/GAUGES & ACCESSORIES (CUSTOMER IS RESPONSIBLE TO DISCONNECT & CAP HYDRAULIC LINES AT FLOOR, NO HYDRAULIC PUMP)
89 CUSTOM BUILT
13" X 14" HYDRAULIC CYLINDER TEARDOWN TABLE W/(2) RIDGID PIPE VISES & ACCESSORIES (CUSTOMER IS RESPONSIBLE TO DISCONNECT & CAP HYDRAULIC LINES AT FLOOR, NO HYDRAULIC PUMP)
90 CUSTOM BUILT
22' X 14" HYDRAULIC CYLINDER TEARDOWN TABLE W/RIDGID PIPE VISE & ASSORTED FITTINGS & METRIC HOSE ADAPTERS (CUSTOMER IS RESPONSIBLE TO DISCONNECT & CAP HYDRAULIC LINES AT FLOOR, NO HYDRAULIC PUMP)
91 WONDER MATIC
HYDRAULIC BENDING MACHINE ON CASTERS W/ASSORTED DIES & FOOT CONTROL, 5 HP, 220V, 3 PHASE
92 CUSTOM BUILT
PIPE/CONDUIT BENDING STATION W/ASSORTED DIES
93 CUSTOM BUILT
APPROX 10 HP 18" ABRASIVE CHOP SAW W/EXTRA BLADES, 230/460V, 3 PHASE
94 PEDESTAL MOUNTED DUAL BENCH GRINDER STATION, 120V
95 CUSTOM BUILT
HYDRAULIC POWER UNIT CART W/MITSUBISHI 2-CYL DIESEL ENGINE (CONDITION UNKNOWN)
96 CUSTOM BUILT
HYDRAULIC PUMP CART, 2 HP, 115/208V, SINGLE PHASE
97 CUSTOM BUILT
TRACK PIN PRESS
98 CAROLINA CPW30
PARTS WASHER, 30-GAL CAP, 110V (CUSTOMER RESPONSIBLE FOR SOLVENT)
101 AEROQUIP PROCRIMP 1380
HYDRAULIC HOSE CRIMPER W/ASSORTED DIES, 120V
102 AEROQUIP PROCRIMP 1380
HYDRAULIC HOSE CRIMPER W/ASSORTED DIES, 120V
103 AEROQUIP A
HYDRAULIC CRIMPING MACHINE W/ASSORTED DIES & FOOT CONTROL, 120V
104 ORS
PORTABLE HYDRAULIC CRIMPING MACHINE W/ENERPAC PORTA-POWER & ASSORTED DIES
105 UNION
PORTABLE HYDRAULIC CRIMPING MACHINE W/ASSORTED DIES
106 AEROQUIP
PORTABLE CRIMPING MACHINE W/ASSORTED DIES
107 CUSTOM BUILT
HYDRAULIC HOSE CUTTER TABLE W/BALDOR 5 HP MOTOR, 208-230/460V, 3 PHASE (HARD WIRED, ELECTRICAL DISCONNECTS AT FIRST JOB BOX)
108 CUSTOM BUILT
HYDRAULIC HOSE CUTTER, 115/230V (BOLTED TO TABLE)
109 COLUMBIAN
4" BENCH VISE (BOLTED TO TABLE)
111 LOT, ASSORTED METRIC HYDRAULIC FITTINGS
112 LOT, ASSORTED PIPE THREAD & JIC HYDRAULIC
FITTINGS ON THIS SHELF SECTION
113 LOT, ASSORTED JIC HYDRAULIC FITTINGS ON THIS
SHELF SECTION
114 LOT, ASSORTED ORS HYDRAULIC FITTINGS ON THIS
SHELF SECTION
115 LOT, ASSORTED 4-BOLT FLANGE HYDRAULIC FITTINGS ON
THIS SHELF SECTION
116 LOT, ASSORTED REUSABLE END HYDRAULIC FITTINGS ON
THIS SHELF SECTION
117 LOT, ASSORTED PIPE THREAD & JIC HYDRAULIC
FITTINGS ON THIS SHELF SECTION
118 LOT, ASSORTED ORS HYDRAULIC FITTINGS ON THIS
SHELF SECTION
119 LOT, ASSORTED 4-BOLT FLANGE HYDRAULIC FITTINGS ON
THIS SHELF SECTION
120 LOT, ASSORTED CAT 6-WIRE HOSE ENDS & JIC NUTS &
FERRULES ON THIS SHELF SECTION
121 LOT, ASSORTED METRIC HYDRAULIC FITTINGS ON THIS
SHELF SECTION
126 LOT, ASSORTED HYDRAULIC QUICK COUPLERS ON THIS
SHELF SECTION
127 LOT, ASSORTED FILLERS ON THIS SHELF SECTION
128 LOT, ASSORTED JIC RACING ADAPTERS ON THIS SHELF
SECTION
129 LOT, ASSORTED JIC METRIC ADAPTERS, BRASS PUSH ON
HOSE ENDS & CLAMPS ON THIS SHELF SECTION
130 LOT, ASSORTED O-RING TO JIC HYDRAULIC FITTINGS ON
THIS SHELF SECTION
131 LOT, ASSORTED O-RING TO JIC HYDRAULIC FITTINGS,
CAPS & PLUGS ON THIS SHELF SECTION
132 LOT, ASSORTED O-RING BOSS TO PIPE THREAD
HYDRAULIC FITTINGS ON THIS SHELF SECTION
133 LOT, ASSORTED WELD ON FLANGES & VERSAFLARE NUTS &
FERRULES ON THIS SHELF SECTION
134 LOT, ASSORTED ORS HYDRAULIC FITTINGS ON THIS
SHELF SECTION
135 LOT, ASSORTED PIPE THREAD SWIVEL & BSBP METRIC
HYDRAULIC FITTINGS ON THIS SHELF SECTION
136 LOT, ASSORTED PIPE THREAD SWIVEL & BSBP METRIC
HYDRAULIC FITTINGS ON THIS SHELF SECTION
137 LOT, ASSORTED PIPE THREAD SWIVEL & BSBP METRIC
HYDRAULIC FITTINGS ON THIS SHELF SECTION
138 LOT, ASSORTED PIPE THREAD SWIVEL HYDRAULIC
FITTINGS ON THIS SHELF SECTION
139 LOT, ASSORTED LIVE SWIVEL HYDRAULIC FITTINGS ON
THIS SHELF SECTION
140 LOT, ASSORTED JIC TO JIC HYDRAULIC FITTINGS ON
THIS SHELF SECTION
141 LOT, ASSORTED JIC TO JIC HYDRAULIC FITTINGS ON
THIS SHELF SECTION
142 LOT, ASSORTED JIC TO JIC HYDRAULIC FITTINGS ON
THIS SHELF SECTION
143 LOT, ASSORTED JIC TO JIC HYDRAULIC FITTINGS ON
THIS SHELF SECTION
145 LOT, ASSORTED JIC TO PIPE THREAD & 4-BOLT FLANGE
HYDRAULIC FITTINGS ON THIS SHELF SECTION
146 LOT, ASSORTED JIC TO PIPE THREAD & 4-BOLT FLANGE
HYDRAULIC FITTINGS ON THIS SHELF SECTION
147 LOT, ASSORTED JIC TO PIPE THREAD & 4-BOLT FLANGE
HYDRAULIC FITTINGS ON THIS SHELF SECTION
148 LOT, ASSORTED JIC TO PIPE THREAD HYDRAULIC
FITTINGS ON THIS SHELF SECTION
151 LOT, ASSORTED HYDRAULIC HOSE ON THIS TOP ROW
152 LOT, ASSORTED HYDRAULIC HOSE ON THIS MIDDLE ROW
153 LOT, ASSORTED HYDRAULIC HOSE ON THIS BOTTOM ROW
154 APPROX 185"L X 27"W X 10'H 3-TIER HYDRAULIC HOSE
REEL RACK (REMOVAL BY APPT ONLY, LOCATED ON MEZZANINE)
155 LOT, ASSORTED HYDRAULIC HOSE IN THIS SECTION
156 LOT, ASSORTED HYDRAULIC HOSE IN THIS SECTION
157 LOT, ASSORTED HYDRAULIC HOSE IN THIS SECTION
158 LOT, ASSORTED HYDRAULIC HOSE IN THIS SECTION
159 LOT, ASSORTED HYDRAULIC PARTS & COMPONENTS IN
THIS BOX
161 PAIR OF CROSS MANUFACTURING 030057 HYDRAULIC
CYLINDERS, 2" BORE, 28" STROKE
162 PAIR OF SKAGIT HYDRAULICS HYDRAULIC CYLINDERS, 3"
BORE, 16" STROKE
163 PAIR OF PRINCE PMS-AM-2550A HYDRAULIC CYLINDERS,
4" BORE, 8" STROKE
164 PAIR OF PRINCE PMC-8308 HYDRAULIC CYLINDERS, 3"
BORE, 8" STROKE
165 PAIR OF MAGISTER HYDRAULICS HYDRAULIC CYLINDERS,
2" BORE, 10" STROKE
166 PAIR OF HYDRAULIC CYLINDERS, 1-1/4" BORE, APPROX
38" STROKE
167 PAIR OF SKAGIT HYDRAULICS HYDRAULIC CYLINDERS,
APPROX 1-1/2" BORE, APPROX 20" STROKE
168 PAIR OF SKAGIT HYDRAULICS HYDRAULIC CYLINDERS,
APPROX 2-1/2" BORE, APPROX 11" STROKE
169 PAIR OF SKAGIT HYDRAULICS HYDRAULIC CYLINDERS,
APPROX 2-1/2" BORE, APPROX 11" STROKE
170 PAIR OF HYDRAULIC CYLINDERS, APPROX 1-1/2" BORE,
APPROX 12" STROKE
171 PAIR OF SKAGIT HYDRAULICS HYDRAULIC CYLINDERS,
APPROX 2-1/2" BORE, APPROX 18" STROKE
172 LOT, (3) NORRICK HYDRAULIC CYLINDERS, 3" BORE,
10" STROKE
173 PAIR OF HYDRAULIC DUMP BED CYLINDERS (61"
CYLINDER LENGTH)
174 PAIR OF HYDRAULIC DUMP BED CYLINDERS APPROX 65"
STROKE
175 LOT, (6) ASSORTED HYDRAULIC CYLINDERS IN THIS
SECTION
176 LOT, (5) ASSORTED HYDRAULIC CYLINDERS IN THIS
SECTION
177 LOT, (4) ASSORTED HYDRAULIC CYLINDERS IN THIS
SECTION
178 LOT, (7) ASSORTED HYDRAULIC CYLINDERS IN THIS
SECTION
179 LOT, (10) ASSORTED HYDRAULIC CYLINDERS ON THIS
RACK (DOES NOT INCLUDE PAIR OF YELLOW CYLINDERS)
180 LOT, ASSORTED HYDRAULIC VALVE ASSEMBLY IN THIS
SECTION
181 LOT, ASSORTED HYDRAULIC VALVE ASSEMBLY IN THIS
SECTION
182 LOT, ASSORTED HYDRAULIC VALVE ASSEMBLIES ON THIS
SHELF SECTION
183 LOT, ASSORTED HYDRAULIC VALVE ASSEMBLIES ON THESE
(4) SHELVES & HYDRAULIC CYLINDER COMPONENETS IN THE BOTTOM OF SHELF UNIT, LOT 371
184 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
185 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
186 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
187 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
188 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
189 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
190 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
191 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
192 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
193 LOT, ASSORTED HYDRAULIC MOTORS ON THIS SHELF
194 LOT, ASSORTED HYDRAULIC DISTRIBUTION BLOCKS ON
THIS SHELF SECTION
195 LOT, ASSORTED ELECTRIC ACTUATED HYDRAULIC CONTROL
VALVES ON THIS SHELF SECTION
196 LOT, ASSORTED AEROQUIP FITTINGS ON THIS SHELF
197 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF
198 LOT, ASSORTED HYDRAULIC PUMPS & COMPONENTS ON
THIS END CAP
199 LOT, ASSORTED HYDRAULIC PARTS & COMPONENTS ON
THIS END CAP
200 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
201 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
202 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
203 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
204 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
205 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
206 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
207 LOT, ASSORTED HYDRAULIC PARTS & SUPPLIES ON THIS
SHELF SECTION
208 LOT, ASSORTED HYDRAULIC SEALS ON THIS SHELF
SECTION
209 LOT, ASSORTED HYDRAULIC SEALS ON THIS SHELF
SECTION
210 LOT, ASSORTED HYDRAULIC SEALS ON THIS SHELF
SECTION
211 LOT, ASSORTED HYDRAULIC SEALS ON THIS SHELF
SECTION
212 LOT, ASSORTED HYDRAULIC SEALS, PARTS & COMPONENTS
ON THIS END CAP
213 LOT, ASSORTED CAST IRON PISTON RINGS ON THIS
PANEL
214 LOT, ASSORTED STANDARD O-RING BACKERS ON THIS
PANEL
215 LOT, ASSORTED STANDARD O-RING BACKERS ON THIS
PANEL
216 LOT, ASSORTED STANDARD O-RING BACKERS ON THIS
PANEL
217 LOT, ASSORTED STANDARD O-RINGS ON THIS PANEL
218 LOT, ASSORTED STANDARD O-RINGS ON THIS PANEL
219 LOT, ASSORTED STANDARD O-RINGS ON THIS PANEL
220 LOT, ASSORTED STANDARD O-RINGS ON THIS PANEL
221 LOT, ASSORTED STANDARD O-RINGS ON THIS PANEL
222 LOT, ASSORTED POLY PACKS ON THIS PANEL
223 LOT, ASSORTED POLY PACKS ON THIS PANEL
224 LOT, ASSORTED METRIC POLY PACKS & WIPERS ON THIS
PANEL
225 LOT, ASSORTED METRIC PISTON SEALS ON THIS PANEL
226 LOT, ASSORTED METRIC O-RINGS ON THIS PANEL
227 LOT, ASSORTED POLY PACKS ON THIS PANEL
228 LOT, ASSORTED POLY PACKS ON THIS PANEL
229 LOT, ASSORTED POLY PACKS ON THIS PANEL
230 LOT, ASSORTED POLY PACKS ON THIS PANEL
231 LOT, ASSORTED POLY PACKS ON THIS PANEL
232 LOT, ASSORTED METRIC O-RINGS ON THIS PANEL
233 LOT, ASSORTED POLY PACKS ON THIS PANEL
234 LOT, ASSORTED POLY PACKS ON THIS PANEL
235 LOT, ASSORTED POLY PACKS ON THIS PANEL
236 LOT, ASSORTED POLY PACKS ON THIS PANEL
237 LOT, ASSORTED POLY PACKS ON THIS PANEL
238 LOT, ASSORTED TEFLON PISTON SEALS ON THIS PANEL
239 LOT, ASSORTED TEFLON PISTON SEALS ON THIS PANEL
240 LOT, ASSORTED PLASTIC HYDRAULIC CAPS IN THIS
SECTION
251 LOT, MISC PARTS & SUPPLIES ON THIS SHELF W/SHELF
252 LOT, ASSORTED WELDING WIRE & MISC SUPPLIES ON
THIS SHELF W/SHELF
253 38"L X 18"W X 87"H METAL SHELF
254 LOT, ASSORTED SQUARE TUBE, ANGLE, SLEEP PIPE OF
LENGTHS UP TO APPROX 20' ON THESE (3) RACK SECTIONS
255 LOT, ASSORTED INDUCTION HARDENED SLATS, HONED
TUBING, SS SHAFT & ANGLE IRON ON THESE (4) RACK SECTIONS OF LENGTHS UP TO APPROX 20'
256 LOT, ASSORTED INDUCTION HARDENED ROD, SOFT ROD,
SS ROD, BRONZE ROD & HONED BARRELS IN THIS SECTION OF LENGTHS UP TO APPROX 5'
257 LOT, ASSORTED STANDARD & METRIC INDUCTION
HARDENED ROD, SOFT ROD, HOLLOWED ROD, HONED TUBE, SS ROD & FLAT BAR ON THESE (7) RACK SECTIONS OF LENGTHS UP TO APPROX 20'
258 APPROX 20'L X 53"W X 10'10"H CANTILEVER RACK
(REMOVAL BY APPT ONLY)
259 90"L X 53"W X 10'H DOUBLE SIDED CANTILEVER RACK
(REMOVAL BY APPT ONLY)
260 48"L X 36"W WELDING TABLE/32"L X 28"W X 72"H
SHELF W/5" BENCH VISE & ASSORTED STANDS (REMOVAL BY APPT ONLY)
261 LOT, ASSORTED TOOLING, PARTS & SUPPLIES ON THESE
(3) SHELF SECTIONS W/SHELVING
262 OXY/ACET HOSE W/REGULATORS & TORCH
263 COMPRESSED GAS BOTTLE (ARGON)
264 COMPRESSED GAS BOTTLE (ARGON)
265 COMPRESSED GAS BOTTLE (ARGON)
266 COMPRESSED GAS BOTTLE (ACETYLENE)
267 COMPRESSED GAS BOTTLE (NITROGEN)
268 COMPRESSED GAS BOTTLE (OXYGEN)
269 COMPRESSED GAS BOTTLE (OXYGEN)
270 COMPRESSED GAS BOTTLE
271 LOT, ASSORTED HYDRAULIC JACKS IN THIS SECTION
272 LOT, (11) ASSORTED JACK STANDS IN THIS SECTION
276 LOT, ASSORTED HYDRAULIC MOTORS ON THIS PALLET
277 LOT, ASSORTED HYDRAULIC MOTORS ON THIS PALLET
278 LOT, ASSORTED HYDRAULIC MOTORS ON THIS PALLET
279 LOT, ASSORTED HYDRAULIC VALVE ASSEMBLIES ON THIS
PALLET
280 LOT, ASSORTED HYDRAULIC PARTS & COMPONENTS ON
THIS PALLET
281 LOT, ASSORTED HYDRAULIC PARTS & COMPONENTS ON
THIS PALLET
282 LOT, ASSORTED HYDRAULIC FITTINGS ON THIS PALLET
283 LOT, ASSORTED HYDRAULIC FITTINGS ON THIS PALLET
284 LOT, ASSORTED HYDRAULIC PUMPS & PUMP PARTS ON
THIS PALLET
285 LOT, ASSORTED HYDRAULIC PARTS & COMPONENTS ON
THIS PALLET
286 LOT, ASSORTED EXTENSION CORDS & CORD REMS ON THIS
PALLET
287 LOT, ASSORTED BRONZE MATERIAL ON THIS PALLET
288 LOT, ASSORTED MACHINABLE SCRAP MATERIAL
289 LOT, ASSORTED WELDING LEADS, TIPS & COMPONENTS IN
THIS TOOLBOX W/TOOLBOX
296 6'L X 28"W STEEL WORKBENCH
297 LOT, (2) 35"L X 42"H X 12"W HARDWARE CABINETS
W/CONTENTS (LOCATED ON MEZZANINE)
298 LOT, (2) HARDWARE CABINETS W/CONTENTS (LOCATED ON
MEZZANINE)
299 APPROX 36" X 12" HARDWARE CABINET W/CONTENTS
(LOCATED ON MEZZANINE)
300 LOT, (6) ASSORTED HARDWARE BINS W/CONTENTS IN
THIS SECTION (LOCATED ON MEZZANINE)
301 6-BAY LOCKER UNIT, 6'L X 18"W X 6'H (LOCATED ON
MEZZANINE)
302 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
303 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
304 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
305 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
306 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
307 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
308 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
309 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
310 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
311 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
312 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
313 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
314 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
315 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
316 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
317 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
318 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
319 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
320 LOT, MISC HYDRAULIC PARTS & COMPONENTS ON THIS
SHELF SECTION
321 LOT, ASSORTED PIPE FITTINGS & MISC PARTS &
SUPPLIES ON THIS SHELF SECTION
322 LOT, MISC HYDRAULIC PARTS, COMPONENTS & SUPPLIES
ON THIS SHELF SECTION
323 LOT, MISC PARTS & COMPONENTS ON THIS SHELF
SECTION
324 LOT, MISC BEARINGS & PARTS ON THIS SHELF SECTION
325 LOT, MISC PARTS & SUPPLIES ON THIS SHELF SECTION
326 LOT, ASSORTED AUTOMOTIVE PARTS ON THIS SHELF
327 LOT, (20) SPILL TECH 10'L X 5"D OIL SOCKS
331 BT LIFTER
4,500 LB CAP HYDRAULIC PALLET JACK
332 SHOP BUILT
HYDRAULIC HOSE REEL
333 WERNER FS108
8' FIBERGLASS STEP LADDER
334 WERNER
6' FIBERGLASS STEP LADDER
335 LOT, (2) RUNTAL NORTH AMERICA EB3-60-240D
BASEBOARD HEATERS & (1) RUNTAL NORTH AMERICA EB3-120-240D BASEBOARD HEATER, 240V (UNUSED)
341 CLARKLIFT
2,024 LB CAP SOLID TIRE FORKLIFT, 3 CYL PROPANE ENGINE, MANUAL TRANS, 1-STAGE, 72" MAST, HOUR METER READS: 1,030 SERIAL NUMBER: OE34571346
342 2008 JCB 160 SERIES II
SKID STEER, 4 CYL DIESEL, AUX HYDRAULICS, 10-16.5 TIRES
343 1995 CHEV TILTMASTER
CABOVER TRUCK W/16' BOX TRUCK FLOOR, ISUZU 4 CYL TURBO DIESEL, AUTO (RUNS & DRIVES), ODOMETER READS: 338,030 SERIAL NUMBER: J8BC4B1K2S7015176
344 NATIONAL CRANE 600C
BOOM TRUCK CRANE, 34,000 LB CAP APPROX 90' VERTICAL REACH, OUTRIGGER SERIAL NUMBER: 28151
345 CUSTOM BUILT
HYDRAULIC LOG SPLITTER
346 HYDRAULIC DUMP BED HOIST, APPROX 25" STROKE
347 HYDRAULIC DUMP BED HOIST, APPROX 33" STROKE
348 LOT, ASSORTED ELECTRIC MOTORS ON THIS PALLET
349 LOT, ASSORTED ELECTRIC MOTORS ON THIS PALLET
350 LOT, (2) GAS POWERED WELDER/GEN SETS ON THIS
PALLET (CONDITION UNKNOWN)
351 HOBART R-400
WELDING POWER UNIT, 230/460V, 3 PHASE (CONDITION UNKNOWN) SERIAL NUMBER: 16RT-3023
352 LOT, (1) TAWASI SD-10 GENERATING & ELECTRODE
WELDING ALTERNATOR & (1) WESTERBEKE 3 CYL DIESEL GENERATOR ON THIS PALLET (CONDITION UNKNOWN)
353 SKID MOUNTED GENERATOR W/GM 2 CYL DIESEL, ENGINE,
APPROX 230V, HOUR METER READS: 635
354 ARRAL INDUSTRIES 11247
60 HP HYDRAULIC POWER UNIT, 100 GAL TANK, 440V, 3 PHASE (CONDITION UNKNOWN)
355 HYSTER
3-STAGE FORKLIFT MAST W/CARRIAGE
356 LOT, (1) DUFF-NORTON 1-TON ELECTRIC CHAIN HOIST &
(1) COFFING 1-TON ELECTRIC CHAIN HOIST ON THIS PALLET (CONDITION UNKNOWN)
357 CUSTOM BUILT
HYDRAULIC POWER UNIT W/10-GAL TANK, 5 HP, 220V (NEEDS REPAIR)
358 LOT, ASSORTED MOTORS ON THIS PALLET (CONDITION
UNKNOWN)
359 ENGINE STAND
360 SKAGIT HYDRAULICS
HYDRAULIC DISPLAY
361 PAIR OF 42"L X 24"H FORKS
362 PAIR OF 41"L X 24"H FORKS
363 37" TRACTOR BUCKET FORK ATTACHMENT
366 LOT, APPROX (19) LINEAR FEET OF DOUBLE SIDED
CANTILEVER MERCHANDISING SHELVES W/END CAPS (REMOVAL BY APPT ONLY)
367 LOT, APPROX (19) LINEAR FEET OF DOUBLE SIDED
CANTILEVER MERCHANDISING SHELVES W/END CAPS (REMOVAL BY APPT ONLY)
368 LOT, APPROX (24) LINEAR FEET OF CANTILEVER
MERCHANDISING SHELVES ALONG THIS WALL (REMOVAL BY APPT ONLY)
369 LOT, APPROX (12) LINEAR FEET OF CANTILEVER
MERCHANDISING SHELVES ALONG THIS WALL (REMOVAL BY APPT ONLY)
370 LOT, (2) 4'L X 19"W SECTIONS OF CANTILEVER
MERCHANDISING SHELVES IN THIS SECTION (REMOVAL BY APPT ONLY)
371 APPROX 6'L X 12"W X 6'H STEEL DISPLAY RACK
(CUSTOMER RESPONSIBLE FOR REMOVAL, REMOVAL BY APPT ONLY)
372 LOT, (13) SECTIONS OF 36"L X 18"W X 82"H SECTIONS
OF METAL SHELVING IN THIS ROW (REMOVAL BY APPT ONLY)
373 LOT, (12) SECTIONS OF 36"L X 18"W X 82"H SECTIONS
OF METAL SHELVING IN THIS ROW (REMOVAL BY APPT ONLY)
374 LOT, REMAINING FURNITURE & SUPPLIES IN THIS
SECTION TO INCLUDE: WOOD BENCH, FILE CABINETS & HARDWARE BINS
375 LOT, (13) SECTIONS OF 36"L X 18"W X 82"H SECTIONS
OF METAL SHELVING IN THIS ROW (REMOVAL BY APPT ONLY, LOCATED ON MEZZANINE)
376 LOT, (5) SECTIONS OF 36"L X 24"W X 84"H SECTIONS
OF METAL SHELVING IN THIS ROW (REMOVAL BY APPT ONLY, LOCATED ON MEZZANINE)
377 LOT, (3) ASSORTED SECTIONS OF METAL SHELVING