A forklift will be available to assist with loading onto flat trailers where possible during both scheduled pickup dates and times.

there will be two opportunities to inspect items in person. Saturday, October 12th from 9:00 a.m. to 2:00 p.m. and Thursday, October 17th from 2:00 p.m. to 6:00 p.m. just prior to the auction close. just to be

there will be no buyer's premium on the work van or forklift.

No buyers premium on this vehicle VIN 1N6BF0KL5CN116832 Vehicle can be seen running and be inspected at either of the two open houses held prior to this auction. Vehicle must be paid for in cash or PA bank Certified check. Truck title can be transferred immediately if buyer pays cash, Any other method will require verification prior to transfer. After payment winning bidder and owner can meet at a notary and transfer the title. Any state sales tax will be charged to buyer at title transfer.

2735 hours. Well maintained Includes extra full propane tank. Good running condition. Forklift can not be picked up until after 2pm on Saturday October 19th as it will be needed until then. Forklift must be paid for in Cash or certified check. If paying with cash, buyer can take immediately upon payment after 2pm on 10/19. Forklift will not be released until verification of cleared payment.

No title is available. Current owner has had it a very long time. Gas was drained when it was put in warehouse 12 years ago.

Trim A Way T 1050, looks to work, needs cleaned up a bit.

approx 2 ft x 6 ft and 35 in tall, lock installed. Has key mfgr specs: Approx. Product Length (in): 60 Approx. Product Width (in): 24 Approx. Product Height (in): 28.5 Style: Chests Lock System: WATCHMAN® IV Lock System Steel Gauge: 16-ga body, 7-ga skids Resources Compatible Accessories The Model 60 JOBMASTER™ Chest is a high-quality tool box that measures 60in wide and has a capacity of 20.25 cu ft. for maximum storage capacity. The tool box chest is impressively versatile and portable, easily storing and transporting anything from hand and power tools to shovels in a compact, personal size that works for a variety of jobsites. This tool storage chest is designed to resist break-in attempts for superior theft protection. It boasts a full-length piano hinge, 16-gauge steel construction with fully arc-welded seams, and a patented WATCHMAN IV Lock System with a 3-point latch and 7-gauge reinforced lock housing. The chest storage box also features an ergonomic lid design that enables it to be opened on three sides, while a damping spring keeps the lid from slamming shut. To make it easier to transport the steel tool chest, it comes with heavy-duty recessed side handles that also protect against damage during transport. A Power Pass® Electrical Pass-Thu grommet ensures weatherproof, convenient power cord access, and a powder coat guards against corrosion and damage. The gang box’s caster-ready, 7-gauge steel skids accommodate optional casters.

Approx 70” wide, one leg has a loose nylon bushing

Typical wear, runs

2/3 to 3/4 full.

mostly full, light brown

approx 32 dark brown, one partial box Hunter green, one partial box moon rock gray

good condition, each section 10’

typical wear, runs

all new in box, Sage model

six 18 in and three 24 in

Sage model

11 hooks, one toilet paper holder (used w/ 2 right side ends)

lengths

The lumber and molding in this auction is located on the second floor. It will need to be handed down through a trap door to be loaded in a vehicle. Auction staff will not be available to help with this. if you purchase these items you MUST bring help.

These boards net 9 inches across. they are a veneered cherry particle and cabinet grade ply core board. They are about 3/4" thick.

Boards net 6" across and 1" thick. One is 9', the rest are 10' Solid cherry lumber.

These Boards are a finished cherry veneer on a particle core. The boards net 9" across and are 1/2" thick.

These 1x10's are a veneered particle board core. most have Cherry edging returns that give them an overall channel or u-shape. The board's net 9 in wide and are about 3/4 of an inch thick.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

typical wear, runs

NO BATTERIES, includes charger & tool bag, tools run

2 Bobrick model 35903 Recessed Paper Towel Dispensers (new), stainless commercial grade, used Bradley Soap dispensers

3 mostly full spools 12 GA wire

stainless, new in box, model 396-130

used with keys

Dispensers; new stainless commercial grade, one used grab handle towel bar

aporox 100-150 ft in total length

Kohler, ASI, 1-4 ft lengths.

screw fastener feed & long driver with DeWalt Deck power screwdriver, runs

1500 2-1/2” & 2000 1-1/2” on Quick Load Steips

2 full boxes 2000 and one partial box

7/8" sheathed diameter, aluminum

approx, 2” left on spool, oil and gas resistant sheath, spool is 8” wide, core is 3-1/2” diameter (of of wire is approx 7-1/2“ +).

well used with moderate wear, tools run, includes charger, bag and 1 battery

untested, two 6w530 Brad mods & one 6w531 model

looks like most of a 4000 count box, also a small box of 12-14 x 1” hex head screws

10 42"T uprights, Plus all the rails shown in the picture.

Solid Maple, with cherry finish. 4-3/8" wide. Var lengths to 12' long.

Solid maple with cherry finish. 4" wide. mostly long lengths to 12'.

boards are solid Maple with cherry finish. various lengths up to 12 ft long. see profile pics.

some is solid cherry wood and some solid maple with a cherry finish. mostly long length pieces to 12 ft long. baseboard is 3-5/8" wide.

various sizes, most 8 ft or longer. thicknesses range from a quarter inch to 3/4 in. some are solid cherry, some look like maple.

various shapes and profiles. some solid cherry. some maple with cherry finish.

29"W x 6'L x 48"T. does not have a walk board.

4 are 39" in tall and one is 65" tall.

apprix 4 ft by 2 ft and 35 in tall, padlock installed with key, typical wear

aporox 4+ coils left, approx 14’, a few mild dings in the first foot

both show full, one serviced 2019, one 2016

2x4 with carpet bolted to top

Each Approx 35? tall with 20? square base; cavity apprix 8? across

runs, includes 1 battery, charger and bag

approx half 5,000 count box & about 1/4 left of 5# box.

approx 150-175’ total length, one with mild damage

typical wear in case. Runs

Includes six 3 ft side rails and six clamps in case. Looks to be lightly used if at all. To be used with poly plastic sheeting, not included

not sure of mil or overall length. This is tubular sheeting, aporox 31” wide. Roll is about 5-3/4” OD and 3-3/4 ID

approx 2’ in length. Approx 35-40, other pieces as well

two sealed buckets of 250 each, several partial buckets and some other bracket hardware.

approx 37-40” adjustable, about 18 pcs; some oxidation overall

each about 2’ long, approx 30-35 stakes

12 awg single and 18 awg multi lead.

Diplomat Series Wall mount, stainless steel, one opened to show product.

brackets, hooks, too much to list, please come look, some new, some used, some has seen moisture

4’ x 29” tall, well made

approx 25’ each, three leads plus ground. Looks to be aluminum.

Runs

with case, Runs

Mostly 10 and 12 foot long pcs.

some solid cherry, some stained Maple. Large variety of lengths from 3 ft to 12 ft. width is about 7-1/4" wide.

Mostly 8 ft. pcs but range from 3' to 11'. pieces net 9 and 1/2 in wide.

some looks to be solid cherry. some maybe Maple with a cherry finish. almost all 8-12 foot long pcs.

approx 125-150’ total length

untested and as-is. Has charger and case, NO BATTERY

model 352VS, runs, comes in DeWalt case

Runs, has side handle and case

Runs, comes with case and a few used blades

comes with case and a few blades, Runs

One halogen pair on a tripod, two low standing, two strands of trouble work lights, one with led bulbs. All as-is

both run

Blades

both have 2019 service cards and read full.

some used, all with life left, 7-14”

5, 12 & 14”

Runsl

most have seen use, a couple new or like new, a couple forstner bits, many sizes

Spaces; both run, only one has chuck key

The lumber and molding in this auction is located on the second floor. It will need to be handed down through a trap door to be loaded in a vehicle. Auction staff will not be available to help with this. if you purchase these items you MUST bring help.

Very nice lumber. some edges have cherry stain. Boards are a full 5 in wide and there are 9 and 10-ft lengths.

some unfinished. some finished. Mostly longer pieces 8 to 12 ft. a variety of square rectangular and a few other profiles.

molding is 1- 3/4" thick, and about 5-3/4" wide. has a cherry stain on it. most are 10 and 12 ft lengths.

All 8-ft pieces. 2" x 1-1/2". Solid cherry.

8' to 12' lengths. Cherry finish.

Some cherry, some maple stained cherry.

Door has a cherry stain on it.

two large pieces 41-1/2"W, 91 & 86"L. Plus 5 smaller pieces 41-1/2" x 33".

darker cherry finish on one side.

Bil-Jax brand. There are two end bucks, two cross braces, four stacking pins, and a walk board. There are 5 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four stacking pins, and a walk board. There are 5 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

most look used, probably a few hundred

five 13”, seven 9”

each approx 4@ wide inside and 24” long

orig 8000 pcs

Runs

all read full

four boxes of five each. One does not have outer box

Stands

some mild bending

Runs, has RotoZip tool bag

comes with one battery, charger and bag. Tested working.

runs, comes with case and some sanding pads, hook and loop type 5”

most look used

lumber on top of rack only. Cart is not included.

top shelf on cart only. Cart not included.

bottom shelf of cart only. Cart not included.

Mostly 9-ft pieces.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

all look to be 10’ sections, PVC S40 includes three 1”, one 3/4”, ten 1/2”sections, galvanized includes one 1” and four 3/4”

16 ga, 20v battery & charger included and carry bag. Tested working

in case with batter and charger, untested

runs

8v battery with case. No charger. Lasers light

both read full gauge with 2019 inspection tags

24 pounds in bucket, originally 250 count, looks mostly full, star head

star head, 23 pounds in bucket, originally 250 count, looks mostly full

Nearly 20 pounds in bucket. Fasteners; star head, originally 250 count. Looks to be 2/3 full

11 pounds in bucket, open bucket, about 1/4 full of original 1000 count

Screws; 250 count, 25-1/2 pounds in bucket

about half a box

partial amounts of Twist Strap, Hurricane Tie an Mending Platez

includes 1 battery, charger and bag, runs

with bag and a few discs, runs, no changing wrench

Pacific uses 3AA batteries, current ones are very low, lasers did light

partial box, looks to be about 24

partial box, 3-1/2” x .131 smooth, originally 2500 count

mostly full box of 2500, 3-1/4” x .131 smooth, clipped head vinyl coated

moldings on top of cart only. Cart not included.

top shelf on rack only. Cart not included.

bottom shelf of cart. Cart not included.

Cart only content's not included.

well used. Cross braces on bottom are not included. they are a separate lot. two planks on the top are included.

mostly full box of 4000

partial box of 5000 about 3/4 full.

10 pounds in bucket, about 1/4 to 1/3 full of original 1000 count

has compression, untested

Phillips head, 14 pounds in bucket, about half of original 1000

one has a broken handle.

Stand; some wear, just shy of 72” long

untested, comes with steel case and a few fasteners and charges.

See Photos

30 degree, very clean with two batteries, no cartridges, untested.

both A and B cans, unused

Works. See Photos for Details Dewalt Stand

handles

bolts are 4? to the head, 1/2? shank with 1-1/5? worth of threads.

zinc coated

1/2, 5/8 & 3/4? shaft, some others, no nuts

variety sizes and colors. rack is attached to wall and must stay. this light was for the laminate contents only.

part only. contents not included.

Cart top shelf only. Cart not included.

Cart only. contents not included.

Bil-Jax brand. There are two end bucks, two cross braces, four stacking pins, and a walk board. There are 5 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four stacking pins, and a walk board. There are 5 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four stacking pins, and a walk board. There are 5 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

this lot is for one single and buck with two pins.

some boxes are partial, most are full

runs

with case & charger; no batteries

runs

34 pounds in tub

10 pounds in tub, look to be stainless

19 pounds in tub

likely more wings than bolts, some 6? carriage bolts also

23 pounds in tub, other misc hardware also

larger spool marked 14 ga, smaller spool is a slightly larger size

looks used

With Strip Loads No battery

With Blade and case Works

Extra Blade, Bag Case

Cart top shelf only. Cart not included.

bottom shelf contents of lumber cart as shown. cart not included.

part only. contents not included

whole stack

approximately 46" tall and 19" in diameter.

12" tall & 60" wide.

12" tall & 60" wide

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, four castors and a platform. There are 10 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

approx 5 x 2 ft and 35 in tall. Padlock installed, has the key Mfgr specs: Approx. Product Length (in): 60 Approx. Product Width (in): 24 Approx. Product Height (in): 28.5 Style: Chests Lock System: WATCHMAN® IV Lock System Steel Gauge: 16-ga body, 7-ga skids Resources Compatible Accessories The Model 60 JOBMASTER™ Chest is a high-quality tool box that measures 60in wide and has a capacity of 20.25 cu ft. for maximum storage capacity. The tool box chest is impressively versatile and portable, easily storing and transporting anything from hand and power tools to shovels in a compact, personal size that works for a variety of jobsites. This tool storage chest is designed to resist break-in attempts for superior theft protection. It boasts a full-length piano hinge, 16-gauge steel construction with fully arc-welded seams, and a patented WATCHMAN IV Lock System with a 3-point latch and 7-gauge reinforced lock housing. The chest storage box also features an ergonomic lid design that enables it to be opened on three sides, while a damping spring keeps the lid from slamming shut. To make it easier to transport the steel tool chest, it comes with heavy-duty recessed side handles that also protect against damage during transport. A Power Pass® Electrical Pass-Thu grommet ensures weatherproof, convenient power cord access, and a powder coat guards against corrosion and damage. The gang box’s caster-ready, 7-gauge steel skids accommodate optional casters.

very good condition

With Cases No Batteries Not tested

Batteries With Charger and Case Not tested

With Case & Blades Works

Batteries With Cases & Chargers Not Tested

Drill Bits

Battery Chargers & METAL DeWalt Drill Case with Bits Skil Drill works and has Battery, Charger, and Case

Works

originally came out of Milton Hershey high School. various size pieces. some very large and heavy. a bit dirty from storage. repurpose for whatever you like.

they are a vinyl draped over a rug padding material. have seen good use. May have some life left on them. they measure about 6 ft long and 2 ft wide.

The lumber and molding in this auction is located on the second floor. It will need to be handed down through a trap door to be loaded in a vehicle. Auction staff will not be available to help with this. if you purchase these items you MUST bring help.

Links up to about 14 ft. variety of profiles.

pieces pre-relief cut on back to be run around a curved surface. Mostly 14 ft pieces. at least 200 lineal feet.

very large lot. looks like Mostly solid cherry, with some Maple.

Bil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

With Metal DeWalt Stand Works See Photos for Details

Works

the 72 is missing a cap. The 78 is marked Magnetic. Both have magnetic strips on one side. All bubbles look good.

Portable & Folding. one is about 36” and one is about 45”. Adjustable to lower heights

each about 36” tall and adjustable to lower heights

about 70” long. No apparent issues

Model FR350A

very good condition

39 x 24 x 12 in hauling space

Large quantity of cherry and maple trim moldings.

Bil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

BBil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

Bil-Jax brand. There are two end bucks, two cross braces, & four stacking pins. There are 8 lots in this auction with identical scaffold and we only set one up for a photo. The picture is of one representative unit, which may not be the exact one you are bidding on. The exact numbered section can be viewed at the previews.

2 hoses Works

need cleaning

5550 Watts 8550 Starting Watts

27 x 56" long x 32” deep

Works

12 x 24 long 51" high

All work

12 x 44 long 51" high

there are two boxes of cat6 and one box of 5E.

Used

tubing has about a 1 and 1/16 in inner diameter.

Assorted sizes Dewalt, Porter Cable, Paslode & more Most are full

Not full roll

Other misc brands

Works

135 PSI Oil Free

Full Boxes 1 box is Powernail

Phillips drive

Both Work

Solid conductor. The larger coils black and green are 10 gauge. the white is 12. about 32 lb of wire.

Cart not included

25 x 46 33" tall CART ONLY

box contains both 3" and 3-1/2" bolts. some nuts included.

30 lb remained out of a 50 lb box

well used but to be repurposed for concrete form boards or whatever.

Spyder 7 1/4" Saw Blades, & more

48 in wide x 30 in deep x 37 in high including wheels

remainder of two reels. One marked type CMG FT4, larger cable marked 2/C

Well Used

Works

28 x 28 x 36" tall

2 x 4 feet 47" tall

Cart not included

26 x 48 33" tall CART ONLY

Wood, vinyl and metal items. take what you want. leave what you don't want.

24" long on the clamping side.

18" long on The clamping side.

Black & Decker Mouse Sander/Polisher

Different sizes 1 box never opened

originally a thousand piece box, it looks like A little over half is still there.

Power Charges & Fuel Cells

Snap Ring Pliers & Pop Rivet Gun

Vise-Grips, Plumb Hatchet and more

Socket Other misc. sockets

Spring Clamps, Kobalt Bolt Cutters, Stanley Level and more

larger green roll is 10 gauge and weighs 11 lb.

6 Lifetime plastic seat & back, 3 all metal

approx 70” tall, some finish wear

each about 26 n wide and 53 tall, one is about 56 in tall, arms are about 44 in. They come as shown

28 in tall, 18-1/2 in wide on top

aporox 83 in wide, roughly 12-15 feet in lengths

untested and offered as-is, it does power on and go through start up process

unknown qty, likely a few hundred

smallest are 23-1/2 x 15 and 24 in tall, next is 28-1/2 x 18-1/2 x 29, next is 24-1/2 x 18 x 52, tallest is 28-1/2 x 15 x 60

printer paper

& Cleaner