These are two new Mitutoyo micrometers.

These are five micrometers.

These are two Starrett micrometers.

These are three Mitutoyo micrometers.

This is a group of dial indicators and magnet bases.

These are four micrometers.

These are three miniature anvils. They all are around 1.5" tall and 3-4" long.

This is a group of small taps and dies.

This is a Craftsman machinist tool box. It measures 14" tall x 28" wide x 9" deep.

This is an Ammco crank pin re-turning tool.

This is a Starrett machinist level.

These are three small Starrett dial indicators.

This is a group of taps.

This is a Kennedy machinist tool box. It measures 14" tall x 20" wide x 9" deep.

This is a group of taps.

These are brass plumb bobs.

these are six micrometers.

These are three miniature anvils. They all measure around 4" long and 2" tall.

These are four calipers.

This is a group of misc. taps and dies.

These are two Starrett tap wrenches.

This is a Kennedy machinist tool box. It measures 14" tall x 27" wide x 9" deep.

This is a group of small taps and tap wrenches.

These are two Starrett dial indicators.

This is a group of drill bits.

These are three miniature anvils. The biggest measures 3" tall x 5.5" long.

This is a group of tap wrenches.

This is a Starrett machinist level.

These are five micrometers.

This is a group of misc. taps and dies.

These are six calipers.

This is a group of Starrett squares.

This is a group of taps and dies.

This is a group of micrometers.

This is a group of mill fasteners.

This is a group of reemers

these are two small anvils. The bigger one measures 4" tall x 9" long.

This is an Acra LCM-42. single phase

This is a Bridgeport milling machine. Has a replacement motor. Single phase.

This is a new in box Wen Ding power feed.

This is a pair of '39 Ford headlight lenses and a Ford badge.

This is a group of honing tools.

This is a group of collets.

This is a group of lathe dogs.

this is a group of telescoping gauges.

This is a group of lathe tooling.

This is a group of boring bars.

These are two facing tools.

This is a boring head.

This is a group of chucks.

This is a group of calipers.

This is a group of taps.

This is a group of measuring blocks.

This is a group of clamps.

This is a set of Starrett parallels.

These are inside micrometers.

This is a group of squares.

This is a Kennedy machinist tool box. It measures 8" tall x 28" wide x 10" deep.

This is a group of v blocks.

this is a group of parallels.

This is a small lathe head.

This is a group of transfer punches.

This is a group of drill bits.

This is a group of magnet blocks and trammel points.

This is a group of files.

This is a group of collets.

These are tooling holders.

This is a bender.

This is a Park machinist tool box. It measures 17" x 20" x 9".

This is a group of wire.

This is a small rotary table with tail stock.

these are two Starrett micrometers.

This is a broaching set.

This is a group of hold downs.

This is a group of metal stamps.

These are depth micrometers.

This is a group of dial indicators.

This is a group of calipers.

This is a Starrett feeler gauges.

These are Kennedy machinst tool boxes. Measuremenst overall are 53" tall x 27" wide x 18" deep.

These are Kennedy machinst tool boxes. Measuremenst overall are 53" tall x 27" wide x 18" deep.

This is a group of reemers.

This is a Craftsman tool box with misc. tools.

This is a group of squares.

This is a group of cutters.

This is a Craftsman tap and die set.

This is a group of misc. tools.

This is a group of machinist items.

This is a group of bits.

This is a group made up of magnet stands and more.

This is a group of misc. tools.

This is a group of bits.

This is a group of tooling.

This is a group of bits.

This is a cannon ball.

This is a group of bits and misc.

This is a group of bits.

This is a group of bits.

This is a group of misc. shop items

This is a Central Machinery precision multi-purpose machine.

This is a group of taps.

These are three small anvils. The biggest is 3.5" tall and 5.5" long.

This is a group of tooling and misc.

This is a group of bits.

This is a group of bits.

This is a group of bits.

This is a Milwaukee grinder with valve grinding items.

This is a new 4 jaw chuck.

This is a group of misc. tools.

This is a large rotary table.

This is a 3 jaw chuck

This is a porta power

These are two brass fire extinguishers

This is a Stihl MS180C chainsaw.

This is a group of chains.

This is a Powr-Kraft arc stablizer and DC converter.

This is a Miller Spoolmate 100.

This is a belt sander.

This is a group of power tools.

This is a Hoosier cast iron seat.

This is a group of blacksmith tongs.

This is a group of blacksmith tongs.

This is a group of pipe threaders.

This is a Black Hawk Mill

These are two large ammo cans.

These are two ammo cans.

This is a set of Grey Pneumatic 3/4" drive standard impact sockets.

This is a group of blacksmith tongs.

This is a group of pipe wrenches.

This is a group of miniature hit and miss engine parts.

This is a group of oil bottles.

This is a Black Hawk corn sheller.

This is a pair of Edelbrock aluminum flatheads.

This is a pair of Cyclone alumnium flatheads.

This is a group of soldering irons.

This is a group of hammers.

This is a group of hammers.

This is a group of hammers.

This is a group of Allis-Chalmers snap couplers.

This is a Cyclone blower.

This is a Fisher anvil. It measures 13" tall and 31" long.

This is a blacksmith vise. The jaws measure 6".

This is a Vulcan anvil. It measures 9" tall and 20" long.

This is a blacksmith vise. The jaws measure 4".

This is a swage block. It measures 15" x 15"

This is a Canedy-Otto Western Chief wagon wheel rim bender.

This is a 3ft tall mandrel cone.

This is an anvil with stand. The anvil alone measures 11.5" tall and 29" long.

This is a blacksmith vise. The jaws measure 4.5".

This is an anvil. It measures 9" tall and 17.5" long.

This is a swage block. It measures 8" x 12".

This is a blacksmith vise. Jaws measure 4".

These are two early air compressors. One has a broken leg.

This is a McEnglevan Model MB2 molders bench.

This is a Famco No. 50A punch press.

This is a Marvel draw cut saw.

This is a drill press.

This is a Beardsley & Piper lab speedmullop.

This is a Mayer Brothers Inc. New Little Giant trip hammer. Has a 3 phase motor.

These are three blacksmith vises.

These are two 2ft valve handles.

This is a Burnt Forge swage block. It measures 3.5" x 4".

This is a group of anvil accessories.

This is a pair of Offenhauser alumnium flatheads.

This is a Fenton alumnium flathead intake manifold.

This is a small Speedway series metal lathe. It measures 28" long overall.

This is a group of hammers.

This is a group of hammer heads.

This is a Champion blower.

This is a damaged anvil. It measures 10" tall x 16" long.

These are three John Deere signs. They measure 24" square.

This is a group made up of a bumper and headlights.

These are two Illinois Route 66 signs.

These are two John Deere signs. They measure 24" square.

These are a 24" square Allis-Chalmers sign and a Farmall sign.

This is some smelting pots

This is a 3" drill bit. Overall length is 19"

This is a Clark County Farm Bureau sign that measures 14" x 11"

This is a group of misc. lanterns

This is a Kennedy Decimal Equivalence Chart. Frame measures 33" x 24"

This is some misc. tractor radios

This is a group of Allis Chalmers Collectibles

This is a group of small pulleys

This is some sand castings

This is a group of Blacksmith Tools

This is a group with a small blacksmith vise, a gypsy pot and a lard press, etc.

This is an assortment of bits

This is a vise

This is a small anvil. It measures 4" tall x 8" long

This is (2) Aluminum Flathead Intake Manifolds

This is (2) Maytag Motors

This is some shovels, clamps, Blacksmith made items, etc.

This is a pallet of misc. items

This is a tool holder

These are two reel mowers.

This is a Crate of assorted Car Parts

This is some misc. electric motors

This is a pallet of misc. items including filters, battery box , etc.

This is a pallet of misc. items including filters, floor mats, fuel can, etc.

This is a crate of scrap iron

This is a pallet of misc. including tool boxes, pump, cultivator shovels, etc.

This is a pallet of misc. including crank, rim , come along, etc.

This is a pallet of misc. including cylinders, cultivator lift , etc.

This is a pallet of misc. including ooga horn, carbide light, dolly, etc.

This is a pallet of misc. including pictures, torch, scotch brite, etc.

This is a pallet of misc. including power trowel, hoses, etc.

This is a pallet of misc. including mags, pumps, parts, etc.

This is a pallet of misc. including machinist equipment

This is a group of (4) signs

This is (5) Allis - Chalmers Signs

This is a pallet of misc. including cooler, shop vac, paint gun, etc.

This is a crate with carbs, electric mower and misc.

This is a pallet of misc. including filters, yard sticks, jack stand, etc.

This is a pallet of scrap iron

This is a pallet of misc. including creeper stool, bottles, etc.

This is a pallet of misc. including Texaco barrel, motors, old parts, etc.

This is a Cyclone blasting cabinet.

these are two partial lathes.

This is a homemade forge table.

This is a 5 inch vise on stand.

This is a Tiger blower.

This is a forge table with cyclone blower.

This is a Whitcomb shaper table. It measures 116" long overall and 70" tall.

This is an Imperial Machinery Co. Sirco PA-24 lathe. Measures 128" long overall.

This is a Canedy-Otto drill press.

This is a Vonnegu Machinery Co. shaper.

This is a Warner & Swasey #4 lathe. Measures 93" long overall.

This is a belt driven lathe. It measures 89" long overall.

This is an Empire sand blasting pot.

This is a Case - Davis Skatback 430. Shows 2206 hours.

This is a Hobart welder. Untested.

This is a homemade trailer with winch. Deck measures 14ft long with a 2ft dovetail. Has title

This is a homemade trailer with no title. Deck measures 8ft x 4.4ft.

This is an Allis-Chalmers wide front end.

This is a homemade trailer with no title. Deck measures 10ft x 5ft.

These are two oil cans. One is Wolf's Head and the other is Travelers.

This is a group of oilers.

This is a yellow dog lantern

This is a miniature Economy hit and miss engine. It measures 6" tall and 12" long. Is missing some pieces.

These are two small Weatherhead parts bins. They measure 11" x 16".

This is a group of misc. large wrenches.

This is a group of machinist vises, etc.

This is a group of assorted oil cans

This is a group of line up wrenches

This is some barn lanterns

This is a hanging oil lamp and a Cleveland-Cincinnati-Chicago-St. Louis RR Lantern

This is (2) Spot Lights

This is some assorted taps

This is some assorted taps

This is a Heath dairy box.

This is a group of misc. tools.

This is a group of bits.

This is a group of bits.

This is a Paul R. Breisch Olds engine casting kit.

This is a group of casting items.

This is a 2" vise and a small grinding wheel.

This is a group of oil cans.

This is a group of wrenches.

This is a group of blacksmith tools.

This is a group made up of hand drills, draw knife, hay hook, and a small level.

These are Quaker State and Firestone oil cans.

This is a group of bits.

This is a group of misc. tools and shop items

This is some pulleys and valve handles

This is some misc. tools

This is some misc. hammers

This is a toy tractor and advertising boxes.

This is an assortment of hammer heads

This is some Model T Coils

This is a Tractor Hitch

This is some taps and dies

This is some 8" tall x 5 1/2" across clear plastic cylinders

This is a Paris IL Dr. Pepper Bottle

This is a miniature Windmill and a well pump. Also have a coffee mill and a weather vane

These are three ammo boxes.

This is a group of misc. headlights.

This is a group of toolboxes.

This is a Ford door.

This is a steam whistle.

This is a Bico No. 5 vise.

This is a 6" vise.

This is a Trenton anvil. It measures 9.5" tall and 26" long.

These are a group of jacks and jack stands.

These are two blacksmith drill presses.

This is a forge table. It is cracked.

This is an Atlas shaper table.

This is a Champion blower.

This is an arbor.

This is a group of line shaft hangers and a metal pulley.

These are three Maytag motors.

These are two small lathes.

This is nine bags of coal. Two have been opened.

These are two Allis-Chalmers electric motors.

This is a homemade bandsaw with Wisconsin motor. Overal length is 16ft.

This is a sandblasting trailer.

This is thirty 100 pound bags of Black Diamond sandblasting sand.

This is a small LP tank. Tag says it holds 114 water gallons.

This is a sea chest. Outside measurements are: 20ft long x 8ft wide x 8.5" tall.

This is a pallet of 40+ cinder blocks.

This is a parts washer.

This is a LARGE Monarch lathe. It measures 15.5ft long overall.

This is a DeWalt 60 gallon air compressor.

This is a Vernon Machine Co. lathe.

This is a blacksmith vise. The jaws measure 4".

This is a champion blower on stand.

These are two large chucks. One measures 16" across and the other is 10.5" across.