Early Slightly Off-Center Mint Error for this Scarce Dated Wheat Cent (Mintage of 4,431,000).
Heritage Auctions – Error Coins:
An error coin is a coin that was not correctly made during its manufacture or is outside of acceptable tolerance limits. For example, error coins may have problems such as being struck off-center, having the wrong planchet type, having the planchets improperly produced, so they are too thick or too thin, improperly claded, or any number of other problems that occur during coin manufacturing.
Additionally, the coin die may be damaged during production and lead to several error coins being produced from the damaged coin dies. For example, it may crack due to overuse. Conversely, a coin die may not have been made correctly, leading to various coin errors.
Mint errors should not be confused with die varieties, coins that bear differences on their surfaces due to variations in the dies used to strike them, such as how dates and mint marks were punched, features doubled during die creation, etc. The primary determining factor between error coins and die varieties is that die varieties are reproduced hundreds or thousands of times because the imperfection was on the coin die used to produce the coins. However, there is still some debate among numismatists about what constitutes an error coin versus a die variety.
Classification of Error Coins
There are three different classifications of error coins. Some error coins may have a combination of these problems.
1. Planchet: Any problem with the planchet that the coin was made on. This may include incomplete planchets, wrong metal, cracked, chipped, clipped, or thickness.
2. Die: A coin die is a hardened piece of metal that is used to strike the coins in the coining press. Any coin die that is not made in adherence to United States Mint standards. This may include preproduction errors and damage to the coin die during the coining process.
3. Strike: Any problem with the physical production of the coin in the coining press. There is numerous classification of errors that are due to the improper striking of a coin. Examples include off-center strikes, multiple strikes, rotated dies, misaligned dies, weak strikes, overstrikes, etc.
Types of Mint Errors
• Die Cap - Occurs when a planchet is fed into the coining press, the previous planchet did not eject and the first planchet sticks to one of the coin dies. After repeated strikes, the first planchet starts taking the form of a bottle cap.
• Wrong Planchet - The incorrect planchet is fed into the coining press and does not match the dies that are loaded in the press.
• Off-Centers - The planchet is not centered between the two coin dies in the coining press.
• Broadstrikes - The coining collar that holds the coin between the two dyes is not fully engaged in the coin is struck anyway.
• Partial Collars - The coining collar is partially engaged in results in a malformed coin edge.
• Brockages - One coin is struck on top of another coin in the coining chamber.
• Double & Triple Struck - The coin is struck multiple times.
• Die Adjustment - The coin is struck with not enough pressure due to the coin press operator adjusting the machine.
• Bonded Coins - Two coins are struck together.
• Double Denominations - A coin is first struck with one denomination and then fed through a coining press that has coin dies for a different denomination.
• Coins Struck on Feeder Finger Tips - The coin press uses "feeder fingers" to feed the planchets into the coining press. Occasionally, the feeder finger gets struck with the coin design instead of the planchet.
• Struck Fragments - Metal fragments from various sources can end up in the coining press and get struck with the coin design.
• Proof Errors - Any proof coin that was not properly prepared according to proof coin standards.
• Transitional Errors - When the mint changes from one metallic composition to another and a previous planchet with the old composition ends up getting struck as newly dated coins.
• Fold-Over Strikes - A planchet is fed into the coining press in the vertical position and get struck on its edge instead of on its surface.
• Missing Edge Lettering - Coins that are supposed to have lettering on the edge is missing. This is most prevalent on Presidential Dollars.
Makes a great investment or perfect gift for your favorite Numismatist.
No sales tax on Coins, Bullion, Currency or Postage.
View our full catalog of quality items up for auction at: PotOfGoldEstate.com
Z67 RM
|