Bill Of Sale Only

2 BFG 1 Trailer Tire and Rim

Title In Office Drove In

Unused 2024 Skid Steer Ripper Attachment Width:72 in Overall Length:30 in Number of Teeth Standard:6 Number of Teeth Total Optional:11 Ripper Tooth Total Length:18.29 in Ripping Depth:7-9 in Weight:450 lbs

Unused 2024 Skid Steer Land Leveler Attachment Weight: 510 lbs Overall Height: 38.3 in Overall width: 78 in Overall Length: 45.2 in Bolt On Cutting Edge: Optional 6

Unused 2024 Skid Steer 3 Point Hitch Adapter Hyd Flow Range Required:15-20 gpm Power :20-34 hp 3 Point Hitch Mount Type:Class II Motor speed: up to 560r/min Power:25KW Output shaft type: PTO shaft Weight:465 lbs

Unused 2024 Skid Steer Snow Pusher Length, width and height: 96X37.7X37.5in Width:2440mm Snow accumulation capacity:5m3 Material of baffle avoidance board: nylon Side panel: 914mm

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Unused 2024 Skid Steer Hydraulic Rotary Tiller Attachment Width:86 in Tilling Width (maximum):72 in Length:26 in Height:24 in Tilling Depth:7 in Weight:573 lbs Number of Tines:36

Unused 2024 Skid Steer Brush Cutter Attachment Weight:776 lbs Hydraulic Flow Required:14-20 gpm Cutting Blades:2 Material Cutting:Up to 3" dia Cutting Width:66 in Wide (Overall):72 in Height (Overall):21.6 in Minimum Cutting Height:2 in Deck Thickness:3/16 in Length (Overall):76 in

Unused 2024 Skid Steer Concrete Breaker Attachment Impact Energy Class:750 ft lb Operating Weight:1230 lbs Length With Tool:69 in Overall Width :51 in Working Steel Diameter:2.67 in Blows Per Minute (variable):620 - 1150 Oil Flow Range:11.9 - 21.9 gpm Operating Pressure Range:1,566 - 3000 psi Relief Pressure:2,310 - 2,610 psi

Unused 2024 Skid Steer Heavy Duty Hydraulic Angle Broom(660) Sweeping Width:72 in Overall Width:86in Brush Diameter:26 in Angle:Hydraulic Path at 25° Angle brushes:poly/wire combination Hydraulic Motor:Bi Directional GPM Range:15 - 20 gpm PSI Range:2000 - 3000 psi Operating Weight:1025lbs

Unused 2024 Skid Steer Dozer Blade Overall Height 27.9in Overall Width 84in Overall Depth 33.2in. Cutting Edge Thickness 1/2-in. Angle 28 degrees left or right Product Weight 658 lb

Unused 2024 Skid Steer Trencher Attachment Trenching depth: 48in Trenching width: 8in Flow Rec:20-30 gpm Clearing Auger Diameter:15 in

Unused 2024 Skid Steer Sickle Bar Mower Cutting Capacity:2" Material Cutter Length:72" Weight:286 lbs. Number of Teeth:25 Flow Range:16-20 GPM Drive System:Gerotor Motor w/Pitman drive Tooth Style:Top Serrated 2" Segment Aquatic Approved:Yes Max Pressure:3500 PSI

Unused 2024 Skid Steer Boxbroom Sweeper Attachment Sweeping Width:72 in Overall Width:85 in Overall Height:30 in Overall Length:57.5 in Brush Diameter:26 in Heaped Capacity:16.8 cu ft GPM Range:15 to 20gpm PSI Range:2,000 to 3000 Operating Weight:920

Unused 2024 Skid Steer Vibratory Roller Attachment Width:66in Stimulation force:3.3 T Maximum input flow:95 L/min Output stable flow:60 L/min Drum Type:Smooth Drum Width:66 in Overall Width:74 in Height (overall):23 in Length (overall):34 in Drum Diameter:24 in Vibrating Speed (vpm):2500 vpm Vibrating Weight:1609 lbs Drum Oscillation/Tilt:15° Max Hydraulic Flow:25 gpm Operating Weight:2150 lbs

Unused 2024 Skid Steer Grapple Bucket Attachment Width:72 in Weight:511 lbs Height:26 in Cylinder:2 in Bore 6 in Stroke Overall Length:36.26 in Max Opening:39 in Weight:520Ibs

Brillion 11 Shank 3pt Chisel Plow Good Points

New AGROTK YSRT14 Mini Skidsteer Powered by a Rato R420 gasoline engine -13.5 Horsepower -660 pound max load capacity -3.7 MPH max speed -Aux Hydraulics -Manual Coupler -Hand Controls -Rubber Tracks -Comes with 44" smooth bucket pictured -Ride on platform

Massey Ferguson 50 Diesel, 3 point , 1 set of remotes, Like New Tires, Duals, 100 Hours on Rebuilt engine

Ex county machine, Service records in office Runs Good

IH 706 Dsl Tractor w/ 4545 Hrs Runs Good, Good T/A , 2 sets of remotes, 540/1000 Pto

John Deere 4020 7,399 Hours, Gas Motor, Runs Good New Carb., 1 Set of Remotes, Came Off A Estate, Good Condition

John Deere 535 Round Baler w/ Net Warp, Pto and Monitor in Office

Unused 2024 Self-Loading Mini Crawler Dumper 6.5 HP EPA BRIGGS&STRATTON Gasoline Engine Weight: 1000 Lbs Payload: 1100 Lbs Shrink the overall size of the machine: 61.8" x 34.6" x 51.2" Container Size: 41.3" x 28.7" x 28.7" Engine: BRIGGS&STRATTON® XR6.5 GROSS HP/208CC 4.9 GROSS KW Max Speed: 1.8-2.3 Ft/s Gradeability: 20° Container Capacity: 7 Ft³ Tipping Angle: 100

Miva VA13 Mini-Excavator Crawler 1.3 Ton 13.5 HP Gas Engine with 420 ccs, 4 Post ROPs, LED Work lights, Backfill Blade, Rubber Tracks. 16" Bucket, 7" Rubber Tracks, Battery Shut Off, Adjustable Choke, Cab , 2000 Lb Operating Weight, 5'4" Digging Depth and a 7' 5" Digging Height.

UNUSED 2024 40 Gallon 2-Stage Truck Mounted Air Compressor Specifications: • Tank capacity: 40 gal • Max. pump running pressure: 175 PSI at 80% duty cycle • Air delivery: 14.5 CFM @ 175 PSI 16.5 CFM @ 135 PSI 18.7 CFM @ 90 PSI 20.6 CFM @ 40 PSI • 1-½"NPT ball valve • 3 AMP battery charging circuit (battery not included) •Powder-coated tank finish •Engine: Briggs&Stratton 10HP,4-stroke,OHV,gasoline •Displacement: 306 cc •Regulated charging system •Low oil shut down •Start type: recoil/electric

Farm King 500 Snowblower 50" Like New w/ Pto

New Holland 7460 Discbine, 1000 Pto and Hitch in Office, Steel Crusher Rolls Good Condition

5 Ft Brush Hog Good Shape Complete PTO

Adapt Universal Skid Steer Quick Tach to Category 1 & 2, 3 Point Quick Hitch. - Reinforced with 3.25”x3.25” tubular steel. - Lightweight design saving on your loaders lifting capacity. - Adjustable top hook to fit most attachments. - Spring loaded levers to lock pins into place. - No welding or modifications needed. Attaching is simple and quick.

8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

Unverferth 15' Rolling Reel 15' good condition field ready not used to much

2 7FT Gates

Brillion XL 144 30' Packer Good Shape

New UNUSED Mini EXCAVTOR BREAKER

NEW X STAR 30,000 Pound Loading Ramp Fork Pockets

Length, width and thickness: 1070*100*30

Length, width and thickness: 1070*100*30

John Deere 900 9 Shank V Ripper 3 Point Good Shanks

2 7 Ft Gates

8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

ONLY HALF PTO NO MOINTOR

Liquid Fert. Vacuum, Row Cleaners, Good Iron, Corn And Bean plates, Moniter In Office NICE PLANTER SN: AO1760R725251

8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

Good Shape

Needs one Section of Blades in Middle

45' Weighted Wings

450,000 Miles, Truck In good Shape

Good Shape Complete Pto

Made to Run with Tractor NO TITLE

Heavy Bulit

Skid Steer Plate Welded on

12" and 18" Bit INCLUDED

Unverferth McCurdy Gravity Wagon And Gear 10 Ton Gear, Lights

NO BUCKET

2024 INDUSTRIAS AMERICA 18X4 Gooseneck Bale Trailer 36 feet bale wagon Capacity: 18 bales (4 feet bales), manual Dump , has two 10k axles, 235/80R16, brakes, lights, and gooseneck coupler BILL OF SALE ONLY

Unused 2024 Skid Steer Pallet Forks Extensions 8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

Unused 2024 Skid Steer Pallet Forks Extensions 8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

Unused 2024 Skid Steer Pallet Forks Extensions 8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

Unused 2024 Skid Steer Pallet Forks Extensions 8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

Unused 2024 Skid Steer Pallet Forks Extensions 8 ft. | 2.5" x 5" Option Extension Dimensions: 3" x 6"

Does not have title

Width:44 in Height:16 in Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI) Material:3/8 in Bucket side:3/8 in Cutting Edge:3/8 in Tine Spacing:2 in Weight:240 lbs

Unused 2024 Skid Steer Auger Drive & Bit Atts 12" and 18" Bit

Unused 2024 Skid Steer Hydraulic Rotary Tiller Attachment Width:86 in Tilling Width (maximum):72 in Length:26 in Height:24 in Tilling Depth:7 in Weight:573 lbs Number of Tines:36

Unused 2024 Mini Skid Steer Combination Bucket Attachments Width:48 in Height (overall):18 in Length (overall):30 in Capacity:4.5 cu ft Weight:280 lbs

Unused 2024 Skid Steer Trencher Attachment Trenching Depth: 48 in Trenching Width: 8 in Flow Rec:20-30 gpm Clearing Auger Diameter:15 in

Unused 2024 Skid Steer Tree Digger Attachments Suitable for ball sizes 36" (914 mm) to 48" (1219 mm), the Tree Shovel features a 3/8" (9.5 mm) plate with tapered and sharpened edges. Move and place trees, shrubs and boulders, and dig holes for new trees

Unused 2024 Skid Steer 6 Way Dozer Blade(with controller) Attachment Weight: 960 lbs Width: 84 in Height: 27 in Length: 36.68 in Blade Cut Width When Angle: 84 in Blade Angle (degree): ±30° Two-way Tilt Angle: ±10 ° Rated working pressure: 2500-3000 psi

Unused 2024 Skid Steer Track Duty Bucket Attachments Width:84 in weight 505Ibs, Capacity:0.46m³

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Unused 2024 Skid Steer Track Duty Bucket Attachments Width:66 in weight 440Ibs, Capacity:0.36m³

Unused 2024 Skid Steer Screening Bucket Attachments Overall dimensions: 49*77*32 in Bucket feed width:72 in Equipment weight: 1053Ibs Screen mesh size: 4/5*4/5in (optional) Bucket capacity 7/8 cubic yards, approx. 635 litres, with constant flow valve to protect the motor, suitable for skid steer loaders.

Unused 2024 Skid Steer Grapple Bucket Attachment Width:72 in Weight:511 lbs Height:26 in Cylinder:2 in Bore 6 in Stroke Overall Length:36.26 in Max Opening:39 in Weight:520Ibs

Unused 2024 Skid Steer Auger Drive & Bit Atts 12" and 18" Bit

Unused 2024 Skid Steer Brush Cutter Attachment Weight:776 lbs Hydraulic Flow Required:14-20 gpm Cutting Blades:2 Material Cutting:Up to 3" dia Cutting Width:66 in Wide (Overall):72 in Height (Overall):21.6 in Minimum Cutting Height:2 in Deck Thickness:3/16 in Length (Overall):76 in

Unused 2024 Skid Steer Class 2 Quick Hitch Fits all Class 1 tractors - Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19"

Unused 2024Skid Steer Stump Grapple Attachments Width:45.5 in Height:30 in Length:36 in Weight:425 lbs Material Thickness:1/2 in Cutting Edge:1 in x 8 in Grapple Opening Max Height:45.27 in

Unused 2024 MIni Skid Steer Stump Grapple Attachments Width:44 in Height:16 in Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI) Material:3/8 in Bucket side:3/8 in Cutting Edge:3/8 in Tine Spacing:2 in Weight:240 lbs

Unused 2024 Skid Steer Feed Bunk Sweeper Bristle Diameter:36" Bristle Material:Poly Degree of Brush Head Rotation:128º Min Hydraulic Pressure:1700 psi Flow Rate Min Require:10-15 gpm Max PSI Rating:3000psi Weight: 633 lbs

Good Shape

Unused 2024 Mini Skid Steer Auger Drive & Bit Attachments Working pressure: 21MPa, minimum drilling diameter 6", torque 950N(2300ft lbs), drilling rod speed 45rpm, required hydraulic flow 7-15GM, suitable for skid steer loader.

Unverferth McCurdy Gravity Wagon And Gear 10 Ton Gear, Lights

Gas motor and auto trans with a nice grain box Title In Office Drove in

20" Blade VERY GOOD SHAPE

Unused 2024 Skid Steer Tree Digger Attachments Suitable for ball sizes 36" (914 mm) to 48" (1219 mm), the Tree Shovel features a 3/8" (9.5 mm) plate with tapered and sharpened edges. Move and place trees, shrubs and boulders, and dig holes for new trees

24 Ft Knock On Teeth

Unused 2024 Skid Steer 6 Way Dozer Blade(with controller) Attachment Weight: 960 lbs Width: 84 in Height: 27 in Length: 36.68 in Blade Cut Width When Angle: 84 in Blade Angle (degree): ±30° Two-way Tilt Angle: ±10 ° Rated working pressure: 2500-3000 psi

7 Ft

NEW AGT Skid Steer Cement Mixer

Width:86 in Tilling Width (maximum):72 in Length:26 in Height:24 in Tilling Depth:7 in Weight:573 lbs Number of Tines:36

Overall Height:30 in Overall Width:30.5 in Overall Length:50 in Fork Tines Capacity:2,500 lbs Fork Tine:42" x 4" x 1.5" Operating Weight:306 lbs

Unused 2024 Mini Skid Steer Pallet Fork Attachments Overall Height:30 in Overall Width:30.5 in Overall Length:50 in Fork Tines Capacity:2,500 lbs Fork Tine:42" x 4" x 1.5" Operating Weight:306 lbs

Unused 2024 MIni Skid Steer Stump Grapple Attachments Width:44 in Height:16 in Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI) Material:3/8 in Bucket side:3/8 in Cutting Edge:3/8 in Tine Spacing:2 in Weight:240 lbs

Unused 2024 Skid Steer Auger Drive & Bit Atts 12" and 18" Bit

2 7 Ft Gates Deer Design

Unused 2024 Skid Steer Screening Bucket Attachments Overall dimensions: 49*77*32 in Bucket feed width?72 in Equipment weight: 1053Ibs Screen mesh size: 4/5*4/5in (optional) Bucket capacity 7/8 cubic yards, approx. 635 litres, with constant flow valve to protect the motor, suitable for skid steer loaders.

Unused 2024 Skid Steer Trencher Attachment Trenching Depth: 48 in Trenching Width: 8 in Flow Rec:20-30 gpm Clearing Auger Diameter:15 in

USA BULIT

HOSE AND WAND IN OFFICE GAS POWERED DIESEL HEAT

Unused 2024 Skid Steer Auger Drive & Bit Atts 12" and 18" Bit

Unused 2024 Skid Steer Ripper Attachment Width:72 in Overall Length:30 in Number of Teeth Standard:6 Number of Teeth Total Optional:11 Ripper Tooth Total Length:18.29 in Ripping Depth:7-9 in Weight:450 lbs

2 7 Ft Gates DEER Design

Unused 2024Skid Steer Stump Grinder(with controller) Width:45 in Height:30 in Length:76 in Below Ground Depth:8 in Swing Arc:55° Maximum Lift:25° Number of Cutting Teeth:32 Carbide Wheel Diameter:25 in Hydraulic Flow Requirement:15-30 gpm Weight:608 lbs

2 7 Ft Gates DEER Design

Width:74 in weight 448Ibs, Capacity:0.39m³

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Unused 2024 Skid Steer Class 2 Quick Hitch Fits all Class 1 tractors - Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19

Unused 2024 Skid Steer Brush Cutter Attachment Weight:776 lbs Hydraulic Flow Required:14-20 gpm Cutting Blades:2 Material Cutting:Up to 3" dia Cutting Width:66 in Wide (Overall):72 in Height (Overall):21.6 in Minimum Cutting Height:2 in Deck Thickness:3/16 in Length (Overall):76 in

Unused 2024 Skid Steer Auger Drive & Bit Atts 12" and 18" Bit

Unused 2024 Skid Steer Class 2 Quick Hitch Fits all Class 1 tractors - Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19

2 10Ft Gates

Unused 2024 Mini Skid Steer Pallet Fork Attachments Overall Height:30 in Overall Width:30.5 in Overall Length:50 in Fork Tines Capacity:2,500 lbs Fork Tine:42" x 4" x 1.5" Operating Weight:306 lbs

HEAVY BULIT REMOVABLE LEGS

HEAVY BULIT REMOVABLE LEGS

HEAVY BULIT REMOVABLE LEGS

HEAVY BULIT REMOVABLE LEGS

HEAVY BULIT REMOVABLE LEGS

UNUSED 2024 40 Gallon 2-Stage Truck Mounted Air Compressor Specifications: • Tank capacity: 40 gal • Max. pump running pressure: 175 PSI at 80% duty cycle • Air delivery: 14.5 CFM @ 175 PSI 16.5 CFM @ 135 PSI 18.7 CFM @ 90 PSI 20.6 CFM @ 40 PSI • 1-½"NPT ball valve • 3 AMP battery charging circuit (battery not included) •Powder-coated tank finish •Engine: Loncin 10HP,4-stroke,OHV,gasoline •Displacement: 306 cc •Regulated charging system •Low oil shut down •Start type: recoil/electric

2 Owner Plow Good Iron Nice Shape

New Tires Good Points Nice Shape

Skid Steer Hook Up

Good Wheels, New JD Cylinder

UNUSED 2024 60 Gallon 2-Stage Truck Mounted Air Compressor Specifications: •Tank capacity: 60 gal •Max pump speed: 930 RPM •Engine automatic start: 120-135 PSI tank pressure •Engine automatic stop: 175 PSI tank pressure •Max pump running pressure: 175 PSIat 80% duty cycle •Air delivery: 18.5 CFM @ 175 PSI 21.5 CFM @ 135 PSI 24.4 CFM @ 90 PSI 26.8 CFM @ 40 PSI •Air outlet:2-¼”NPT quick connect •1-½”NPT ball valve •3 AMP battery charging circuit (battery not included) •Powder-coated tank finish •Engine:14 HP Kohler CH440 Command Pro Series Engine •Displacement: 429 cc •Start type: Electric & recoil pull start •Castiron cvlinder liners:Oil Sentry automatic shutdown •Fuel tank capacity: 2 US gal •Oil capacity: 0.35 US gal

4,415 Hours On Working Tach Owner States They Are Orginal, Quad Range, 2 Sets, Of Remotes,1000 Pto, 10 Bolts Axle Duals Included, 20.8R38 NICE TRACTOR

SOLD OFF SITE LOCATED 1 MILE DOWN RD 2006 Deere 350D LC Track Excavator, Deere 6090H 270 HP Turbo Charged Engine, Under Carriage Approximately 85%, Pads: 31-1/2" Wide, Grousers 1 1/4" , Manual Pin Grabber, 48" GP Bucket With 12" Teeth comes with Machine, New Roll Cylinder 5/20, New Wiring Harness 5/20, New Hydraulic Pump 10/20, Re-machined and Rebuilt Spool Valve 10/20, New Swing Motor 10/20, New Front Idlers 10/20, New Turbo And ECM Operating Weight : 78,000 LBS. Machine Ready For Pick Up COMES WITH A DITCHING BUCKET

God

Unused 2024 Mini Skid Steer Auger Drive & Bit Attachments Working pressure: 21MPa, minimum drilling diameter 6", torque 950N(2300ft lbs), drilling rod speed 45rpm, required hydraulic flow 7-15GM, suitable for skid steer loader.

Unused 2024 Mini Skid Steer Auger Drive & Bit Attachments Working pressure: 21MPa, minimum drilling diameter 6", torque 950N(2300ft lbs), drilling rod speed 45rpm, required hydraulic flow 7-15GM, suitable for skid steer loader.

Rubber Edge

Unused 2024 Mini Skid Steer Combination Bucket Attachments Width:48 in Height (overall):18 in Length (overall):30 in Capacity:4.5 cu ft Weight:280 lbs

UNUSED 2024 Two person Indoor Infrared Sauna Room Specifications: Electrical power required: 120 V 60 Hz/15amp Wattage: 1780 Watts Outer dimensions: 76"(L)x76”(W)x 74"(H) Inner dimensions:50"(L)x50”(W)x70”H) Load capacitv: 2 Person Load weight capacity: 460 Lb Number of heaters: 6 Max temperature: 65°C Min temperature: 18°C Door dimensions: 62"(H)x 21"W)

Unused 2024 MIni Skid Steer Stump Grapple Attachments Width:44 in Height:16 in Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI) Material:3/8 in Bucket side:3/8 in Cutting Edge:3/8 in Tine Spacing:2 in Weight:240 lbs

Good Deck Good Frame Title In Office

Unused 2024 Mini Skid Steer Combination Bucket Attachments Width:48 in Height (overall):18 in Length (overall):30 in Capacity:4.5 cu ft Weight:280 lbs

NIce Shape 300 Gal APROX.

40% Tread Double Bevel Rims

Unused 2024 Skid Steer Track Duty Bucket Attachments Width:84 in weight 505Ibs, Capacity:0.46m³

Unused 2024 3 INCH SEMI-TRASH WATER PUMP Inlet/Outlet Size:3inch/80mm Discharge Volume: 58m³h Max.Lift Head:30m Engine Power:7.0HP

Unused 2024 Heavy Duty Plate Compactor 6.5 HP Loncin G200F Engine Unused 2024 Heavy Duty Plate Compactor Gross Welght: 225 lbs Dlmenslon: 68"x 20"x 35"

Unused 2024 Mini Skid Steer Pallet Fork Attachments Overall Height:30 in Overall Width:30.5 in Overall Length:50 in Fork Tines Capacity:2,500 lbs Fork Tine:42" x 4" x 1.5" Operating Weight:306 lbs

Unused 2024 Skid Steer Fork Grapple Attachments Weight With 48" Forks:560 lbs Overall Width:45.2 in Tine Length:48 in Cylinder Size:2 in x 8 in Opening Full Height:7 in Max Height Closed:41.3 in Capacity Max:3500bs

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Unused 2024 Skid Steer Tree Digger Attachments Suitable for ball sizes 36" (914 mm) to 48" (1219 mm), the Tree Shovel features a 3/8" (9.5 mm) plate with tapered and sharpened edges. Move and place trees, shrubs and boulders, and dig holes for new trees

Unused 2024 Mini Skid Steer Auger Drive & Bit Attachments Working pressure: 21MPa, minimum drilling diameter 6", torque 950N(2300ft lbs), drilling rod speed 45rpm, required hydraulic flow 7-15GM, suitable for skid steer loader.

Unused 2024 3 INCH SEMI-TRASH WATER PUMP Inlet/Outlet Size:3inch/80mm Discharge Volume: 58m³h Max.Lift Head:30m Engine Power:7.0HP

Unused 2024 Heavy Duty Plate Compactor 6.5 HP Loncin G200F Engine Unused 2024 Heavy Duty Plate Compactor Gross Welght: 225 lbs Dlmenslon: 68"x 20"x 35"

Unused 2024 Skid Steer Bale Grapple Attachments Width:74" Height:38" Depth:41" Bucket Tines:5 Tine Thickness:.4" Number of Grapple Teeth:4 Grapple Jaw Opening:46" Weight:500 lbs Recommended Loader Capacity:Greater than 2,400lbs

Unused 2024 Skid Steer Track Duty Bucket Attachments Width:63 in weight 440Ibs, Capacity:0.36m³

Unused 2024 Skid Steer Track Duty Bucket Attachments Width:72 in weight 448Ibs, Capacity:0.39m³

Unused 2024 Skid Steer Track Duty Bucket Attachments Width:78 in weight 480Ibs, Capacity:0.42m³

Unused 2024 Skid Steer Track Duty Bucket Attachments Width:84 in weight 505Ibs, Capacity:0.46m³

Unused 2024 Skid Steer 6 Way Dozer Blade(with controller) Attachment Weight: 960 lbs Width: 84 in Height: 27 in Length: 36.68 in Blade Cut Width When Angle: 84 in Blade Angle (degree): ±30° Two-way Tilt Angle: ±10 ° Rated working pressure: 2500-3000 psi

Good Shape

1 Set Of Remotes Rear Weights Nice Shape

670cc PreaTor Engine Gas Powerd

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Nice Shape

4000 pound Cap.

28' Good Shape, S Tine

Unused 2024 3 INCH SEMI-TRASH WATER PUMP Inlet/Outlet Size:3inch/80mm Discharge Volume: 58m³h Max.Lift Head:30m Engine Power:7.0HP

Unused 2024 Heavy Duty Plate Compactor 6.5 HP Loncin G200F Engine Unused 2024 Heavy Duty Plate Compactor Gross Welght: 225 lbs Dlmenslon: 68"x 20"x 35"

UNUSED 2024 Three Person Indoor Infrared Sauna Room Specifications: Electrical power required: 120 V 60 Hz/15amp Wattage: 2100 Watts Outer dimensions: 57"L)x41"(W)x 74”(H) Inner dimensions: 54"(L)x38”(W)x70"(H) Load capacitv: 3 Person Load weight capacitv: 690 1b Number of heaters: 7 Max temperature: 65? Min temperature: 18? Door dimensions: 62(H)x 21"W)

Unused 2024 Skid Steer Screening Bucket Attachments Overall dimensions: 49*77*32 in Bucket feed width?72 in Equipment weight: 1053Ibs Screen mesh size: 4/5*4/5in (optional) Bucket capacity 7/8 cubic yards, approx. 635 litres, with constant flow valve to protect the motor, suitable for skid steer loaders.

Unused 2024 3 INCH SEMI-TRASH WATER PUMP Inlet/Outlet Size:3inch/80mm Discharge Volume: 58m³h Max.Lift Head:30m Engine Power:7.0HP

Unused 2024Skid Steer Stump Grinder(with controller) Width:45 in Height:30 in Length:76 in Below Ground Depth:8 in Swing Arc:55° Maximum Lift:25° Number of Cutting Teeth:32 Carbide Wheel Diameter:25 in Hydraulic Flow Requirement:15-30 gpm Weight:608 lbs

Unused 2024 Skid Steer 6 Way Dozer Blade(with controller) Attachment Weight: 960 lbs Width: 84 in Height: 27 in Length: 36.68 in Blade Cut Width When Angle: 84 in Blade Angle (degree): ±30° Two-way Tilt Angle: ±10 ° Rated working pressure: 2500-3000 psi

Unused 2024Skid Steer Stump Grapple Attachments Width:45.5 in Height:30 in Length:36 in Weight:425 lbs Material Thickness:1/2 in Cutting Edge:1 in x 8 in Grapple Opening Max Height:45.27 in

Unused 2024 Skid Steer Concrete Chuter Attachments Capacity:3/4 Yard Weight:461 lbs Length:38.5 in Length with Extension:68 in Width:60 in Height:30 in Lift capacity Requirement:3,200 lbs

Unused 2024 Skid Steer Rock Rake Attachments Bucket Width:75" Working Width:72" Overall Width:79" Overall Length:62.4" Overall Height:21.5" Drum Diameter:12.5" Replaceable Teeth:84 Required Flow:12-20 gpm 3000 psi Operating Weight:990 lbs

Unused 2024 Skid Steer Auger Drive & Bit Atts 12" and 18" Bit

Unused 2024 Skid Steer Brush Cutter Attachment Weight:776 lbs Hydraulic Flow Required:14-20 gpm Cutting Blades:2 Material Cutting:Up to 3" dia Cutting Width:66 in Wide (Overall):72 in Height (Overall):21.6 in Minimum Cutting Height:2 in Deck Thickness:3/16 in Length (Overall):76 in

2 Row

Unused 2024 3 INCH SEMI-TRASH WATER PUMP Inlet/Outlet Size:3inch/80mm Discharge Volume: 58m³h Max.Lift Head:30m Engine Power:7.0HP

Unused 2024 Heavy Duty Concrete Floor Saw 6.5 HP Loncin G200F Engine Gross Weight: 196 lbs Dimension: 37"x 20"x 37"

2 Row

Runs and Drives But Dsl. leaks in oil

1 Set of Remotes Runs And Drives

3,500 Hours Runs And Drives No Major Leaks Nice Backhoe

500 Bushel, Lights, Good Augers, Nice Cart

New Brakes, New Tires Clean In Side HAS A MISS SOMETIMES OWER STATES

3 way Nozzles, Hyd Spray Pump, 3 Section, Moniter in Office

All Gears Work, All Tires Hold Air, Hydralics Work,

Pto free spins,Fast Hitch, Back Blade, Runs Good, 1 Owner bought new from Elmer Lange

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Unused 2024 3 INCH SEMI-TRASH WATER PUMP Inlet/Outlet Size:3inch/80mm Discharge Volume: 58m³h Max.Lift Head:30m Engine Power:7.0HP

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Unused 2024 Mini Skid Steer Pallet Fork Attachments Overall Height:30 in Overall Width:30.5 in Overall Length:50 in Fork Tines Capacity:2,500 lbs Fork Tine:42" x 4" x 1.5" Operating Weight:306 lbs

Fork Pockets

Unused 2024 Pallet Forks Extensions 6.6 ft.

Unused 2024 Mini Skid Steer Pallet Fork Attachments Overall Height:30 in Overall Width:30.5 in Overall Length:50 in Fork Tines Capacity:2,500 lbs Fork Tine:42" x 4" x 1.5" Operating Weight:306 lbs

Unused 2024 Pallet Fork Hydraulic Adjustable Fork Rating:4,000 lbs Mounting:Universal Skid Steer Forks:48 in Long Adjustable With Locks Side Steps:2 Headache Rack:Beveled Fork Tines LxWxH:48" x 4" x 1 1/2" Class II Weight:330 lbs

Unused 2024 Skid Steer Bale Grapple Attachments Width:74" Height:38" Depth:41" Bucket Tines:5 Tine Thickness:.4" Number of Grapple Teeth:4 Grapple Jaw Opening:46" Weight:500 lbs Recommended Loader Capacity:Greater than 2,400lbs

Unused 2024 Skid Steer Class 2 Quick Hitch Fits all Class 1 tractors - Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19"

Wash away dirt and grease on your vehicles, machinery, walls and walkways Powered by a reliable 13 HP Powerful PR Pro gasoline engine 4 GPM water output at up to 4000 PSI 12V DC igniter & diesel fired burner 33’ high-pressure hose and spray wand assembly included Features Reinforced, fully welded industrial use structure with a powder-coated steel frame finish can hold its own on any job site and is resistant to rust and corrosion. Automotive engine-type rubber cushions were added on the base to reduce vibration and noise while operating as well as reduce wear and tear over time. Diesel-fired burner with a stainless steel housing that can heat water to approximately 85? in just under 1.5 minutes for more cleaning power. All-in-one operation control panel that includes an adjustable thermostat, on/off switch, and easy-to-use water pressure settings. Compact design and attached lifting bar for convenient mobility while working, between job sites, and taking in and out of storage. 33’ high-pressure hose allows you to work around big vehicles or farm equipment and also covers large floor spaces, driveways, or buildings. Specifications Pressure range: 3500-4000 PSI Flow rate: 4.0 GPM 300,000 BTU per hour The temperature rises to 85 °C in 1.5 minutes (average) High-pressure hose: 33’ Five quick coupler nozzles: 0°/15°/25°/40° and one soap Downstream soap injection system Water supply: Tap water 6-gallon burner fuel tank

Unused 2024 Skid Steer Class 2 Quick Hitch Fits all Class 1 tractors - Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19"

Unused 2024 3 Point Quick Tach Adapt Universal Skid Steer Quick Tach to Category 1 & 2, 3 Point Quick Hitch. - Reinforced with 3.25”x3.25” tubular steel. - Lightweight design saving on your loaders lifting capacity. - Adjustable top hook to fit most attachments. - Spring loaded levers to lock pins into place. - No welding or modifications needed. Attaching is simple and quick.

Brand New Agrotk B7 4' 3 Pt No Till Drill

Engine: 420cc Gas W/ Backfill Blade, 12IN Digging Bucket, Fixed Thumb, 6IN Rubber Tracks

Unused 2024 MIni Skid Steer Stump Grapple Attachments Width:44 in Height:16 in Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI) Material:3/8 in Bucket side:3/8 in Cutting Edge:3/8 in Tine Spacing:2 in Weight:240 lbs

Unused 2024 3 INCH SEMI-TRASH WATER PUMP Inlet/Outlet Size:3inch/80mm Discharge Volume: 58m³h Max.Lift Head:30m Engine Power:7.0HP

Unused 2024 Vibratory Rammer Jumping Jack 6.5 HP Loncin LC168F-2H Engine Gross Welght: 219 lbs Dlmenslon: 31"x 19"x 45"

Unused 2024 Skid Steer Class 2 Quick Hitch Fits all Class 1 tractors - Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19"

Unused 2024 3 Point Quick Tach Adapt Universal Skid Steer Quick Tach to Category 1 & 2, 3 Point Quick Hitch. - Reinforced with 3.25”x3.25” tubular steel. - Lightweight design saving on your loaders lifting capacity. - Adjustable top hook to fit most attachments. - Spring loaded levers to lock pins into place. - No welding or modifications needed. Attaching is simple and quick.

Unused 2024 Skid Steer Brush Cutter Attachment Weight:776 lbs Hydraulic Flow Required:14-20 gpm Cutting Blades:2 Material Cutting:Up to 3" dia Cutting Width:66 in Wide (Overall):72 in Height (Overall):21.6 in Minimum Cutting Height:2 in Deck Thickness:3/16 in Length (Overall):76 in

Unused 2024 Skid Steer Sickle Bar Mower Cutting Capacity?2" Material Cutter Length?72" Weight?286 lbs. Number of Teeth?25 Flow Range?16-20 GPM Drive System?Gerotor Motor w/Pitman drive Tooth Style?Top Serrated 2" Segment Aquatic Approved?Yes Max Pressure?3500 PSI

Unused 2024 3 Point Quick Tach Adapt Universal Skid Steer Quick Tach to Category 1 & 2, 3 Point Quick Hitch. - Reinforced with 3.25”x3.25” tubular steel. - Lightweight design saving on your loaders lifting capacity. - Adjustable top hook to fit most attachments. - Spring loaded levers to lock pins into place. - No welding or modifications needed. Attaching is simple and quick.

Unused 2024 Skid Steer Auger Drive & Bit Atts 12" and 18" Bit

Unused 2024 Mini Skid Steer Loader Lifting Capacity: 840 Lbs Engine Capacity: 23 HpEngine Displacement/Cvlinders : 739/2Motor Speed: 3600 RpmMax Torque: 2500 Rpm Cooling Method:Air-cooled Fuel Tank Capacity: 18.2 Lbs Drive System:Hydraulic Four-wheel Drive Travel Speed: 5.5 Km/h Standard Lifting Capacity: 662 Lbs Hydraulic Drive System : 180 Bar Hydraulic Oil Tank Capacity: 22.7 Qt Tires:18*8.5-8 Electrical System :12 V Battery Capacity: 36 Ah Braking Svstem: Hydraulic Closed Brake

Unused 2024 Mini Skid Steer Auger Drive & Bit Attachments Working pressure: 21MPa, minimum drilling diameter 6", torque 950N(2300ft lbs), drilling rod speed 45rpm, required hydraulic flow 7-15GM, suitable for skid steer loader.

Unused 2024 Skid Steer Land Leveler Attachment Weight: 510 lbs Overall Height: 38.3 in Overall width: 78 in Overall Length: 45.2 in Bolt On Cutting Edge: Optional 6

Unused 2024 Skid Steer Trencher Attachment Trenching depth: 48in Trenching width: 8in Flow Rec:20-30 gpm Clearing Auger Diameter:15 in

Unused 2024 Skid Steer Hydraulic Rotary Tiller Attachment Width:86 in Tilling Width (maximum):72 in Length:26 in Height:24 in Tilling Depth:7 in Weight:573 lbs Number of Tines:36

UNUSED 2024 40 Gallon 2-Stage Truck Mounted Air Compressor Specifications: • Tank capacity: 40 gal • Max. pump running pressure: 175 PSI at 80% duty cycle • Air delivery: 14.5 CFM @ 175 PSI 16.5 CFM @ 135 PSI 18.7 CFM @ 90 PSI 20.6 CFM @ 40 PSI • 1-½"NPT ball valve • 3 AMP battery charging circuit (battery not included) •Powder-coated tank finish •Engine: Briggs&Stratton 10HP,4-stroke,OHV,gasoline •Displacement: 306 cc •Regulated charging system •Low oil shut down •Start type: recoil/electric

Out of IH 715 Combine UNKNOWNED CONDITION

55 Gal

CRATE NOT INCLUDED

S-Tines

CRATE NOT INCLUDED

CRATE NOT INCLUDED

Shear Bolt Pto 2 bent arms

38x20x16.1

No WHEELS NO PTO

Full Floor, Fan Unload, 3 Bad Sheets

One Broke Spindel No Tires