Amazing Woodworking Tool Shop Auction
Amazing Woodworking Tool Shop Auction
Gold Star Auctions, LLC. | St. Louis, MO 63128
Date(s) :  10/11/2024 - 11/3/2024
Buyer Premium :  15% Buyers Premium For Offsetting Fees


Online Only Auction
Online only auction with soft close on Sunday 11/03/24 at 7pm CT Pickup on Wednesday 11/06/24 from 11am-5pm
This is an online only auction to sell the Lifetime Collection of Master Craftsman Ben Weber, who not only had the cleanest shop around but also had probably the BEST of every tool category you would want when doing high quality work. Large power tools- Jet, Delta, Bosch, Dewalt, etc. Hand power tools - Porter Cable, Dewalt, Festool, Bosch, Makita, etc. Planes - Lie-Nielsen, Ulmia, Stanley, Record Marples, Clifton, etc. Clamps - Bessey, Jorgensen, Irwin, Record, etc. Lathe/Gouge Tools- pfeil, Record Marples, Robert Sorby, Craftsman, etc. AND a bunch of other tools with names you may know, such as Starrett, Crown Tool, Simmons, Millers Falls, Lufkin, etc Ther are over 30 antique wood wood planes, a multitude of honing blocks, and that's just the beginning. OH, and the ANTIQUES. Get a look at the Apothecary cabinet, the two old tool trunks, and a bunch of items I couldn't identify. All items are located in a walk-out basement. Entry is through the front door. All corded tools were checked. All items sell AS-IS. This is one of two auctions from this residence. The other auction will close on Monday 11/4 at 7pm CT. Pickup for both auctions will be on Wednesday November 6, 2024 from 11am-5pm. Bring help for large or heavy items. No assistance will be available. Bring boxes or totes as needed. This is a one day only pickup. Any items not picked up will be forfeited. Shipping is available on certain items. If you need your items shipped, notification must be recieved by the end of the auction by checking the 'Shipping Requested' box at time of registration or via email at nicemark1@att.net
1 New Bally butcher block workbench top
60 x 24. One and three-quarter inches thick.
1a BRING HELP--No Assistance Available
1b All items are in WALK-OUT basement
2 Stack of hardwood for the next project
Pile is roughly 6 feet long
3 Large lot of sketch pads and pencils
4 Fletcher mat cutting systems
5 Two rubber work floor mats
36 x 27
6 New rug pads Three with extra
5’ x 8’. For use under project wood or as intended
7 18 New wood stair spindles
1 5/8 x 1 5/8. 32 inches long.
8 Alvin cutting surface 24 x 36
Two-sided
9 Lots of heavy colored cardboard
10 Alto trim set, blades and points
11 Custom made crafting table
60 x 36. 33 inches tall. Top is on with dowel pins.
12 Three 1 x 6 X 6 foot treated boards
13 Antique newel post
Six and three-quarter inch wide at base. 40 inches of usable newel. 47 inches total length.
14 Delta 6 inch jointer with stand
There’s some two-sided tape on the face that you’ll need to get off. 36 inch table length.
15 Toolbox full of tools
16 Halogen adjustable height shop light
17 Reciprocating saw
Seems to work fine
18 Dewalt surface planer on rolling stand
19 Shelves and a 1232 upper cabinet
20 Pickin rights to basement wall. Cabinet incl.
Paint brushes, frame making, etc.
21 Igloo cooler
Like new
22 Baldor grinder buffer with rolling cabinet base
Base includes extra brackets and parts for grinder
23 Grinder and buffer wheels
24 Luxcut dovetail jig
17 inches wide
25 Two rubber work floor mats
60 x 25
26 Antique Apothecary cabinet. 136 drawers
50 1/2 inches wide. 13 inches deep. 49 inches tall. Body of drawers are metal or tin.
27 50 inch clamp saw guide
Use as straight edge for 4 foot plywood
28 Angle cutting jig for tablesaw
24 inches long fully adjustable
28a BRING HELP--No Assistance Available
29 New set of tin snips
Left, right and straight
30 Jet bandsaw. Model number in pics
73 inches tall. Table size 15 inch. Comes with magnetic job light.
31 Three glass hummingbird feeders
32 3 X 21 sanding belts
4-80 grit. 5- 50 grit. 2- 150 grit
33 Porter Cable belt sander
34 Delta 2000 series table saw
Has rolling base. Has Delta Uni fence saw guide side table. Has detachable outfeed table. Comes with accessories shown in last picture.
35 Very old hinged three part hanging mirror
Have the beveled mirror glass for it. Far left section needs to be glued. Checks/cracks in the other two panels
36 Buck pocket knife
37 Buck pocket knife
38 Bosch 10 inch sliding compound miter saw
Comes with counter and cabinet, bolted to it
39 Bosch jigsaw
40 Socket set. Standard 3/8 drive.
41 Black & Decker drill
42 Ryobi 10 inch drill press and cabinet
Custom-made cabinet just for a drill press
43 Dewalt pilot point twist drill bits
44 Dowel rod punch points
45 Makita trim router
46 Adjustable router table base with router
Router is porter cable
47 Forstner bit set
48 Spade bits and other drill bits
Spade bits from 1/4 to 1 1/4
49 Forstner bits
50 Jet JWL-1236 woodworking lathe
Comes with all pieces shown
51 Drill stops, Vix bits, screw removers, push blocks
Circle sanders
52 Delta tenon jig for tablesaw
53 Custom made shop or project table
49 1/2 x 28. 34 inches tall.
54 Trojan rolling material stand
Adjustable height. 14 inch roller.
55 Pair of custom-made project lifts
30 inches wide, 23 inches tall
56 Pair of custom made project lifts
21 inches wide 5 1/2 inches tall
57 27 inch whisk shop broom
58 22 inch wood block plane
Have hard time reading markings. See pics.
59 Stanley Bailey No. 7 plane
Made in England
60 Lie-Nielsen No. 62 low angle Jack plane
14 inches long.
61 ECE wood plane
9 inches long
62 Lie-Nielsen No. 5 wood Jack plane
14 inches long
63 Ulmia 48 mm wood plane
Comes with box
64 Copradi specialty files in case
65 Set of auger hand twist drills
66 Set of mini wrenches
67 Custom-made wall hanging shelf and contents
No back to shelf 26 inches wide 6 inches deep 31 inches tall
68 Hunk of metal rod from Busch Stadium II
69 Set of alphabet punches in wood case
70 Number punches in wood case
71 Box of square cut nails
72 Oldham dado blade set on bracket
Looks to be a 6 inch set
73 Adjustable cut off jig for tablesaw
28 inches long
74 Antique woodworkers tool trunk
38 x 20. 18 inches tall. Very heavy piece. Back half has one pull out tray, front half has three full length pull out trays
74a BRING HELP--No Assistance Available
75 Two 40 inch Bessey clamps
76 Two 32 inch Bessey clamps
77 Pair of 25 inch Bessey clamps
77a High efficiency air filtration system
34 x 24. 12 inches tall.
77b Older antique woodworkers tool trunk
One full length tray in front. One full length tray in back. 38 x 19. 17 inches tall. Metal over wood for top. Quite a heavy piece.
78 Two 54 inch pipe clamps
Three-quarter inch pipe
79 One 30 inch Pony pipe clamp
Three-quarter inch pipe
80 Two 30 inch pipe clamps with platform stands
Three-quarter inch pipe
81 Two shelves of woodworking books and magazines
82 Hardware and paper towels on wall section
Custom drawers are built into the wall. they stay. You can have the hardware inside of them
83 Glue, sandpaper, wax, etc. on shelf
Shelf not included
84 Dogs Playing Poker. Poker Sympathy print
19 x 14
85 Pinched with Four Aces. Dog print
19 x 14
86 Tool Chest Legacy print
19 x 24
87 Two tool bins with slide out trays. Full
88 Desmond Simplex vise
Number 350. 3 1/2 inch jaws
89 pfeil Swiss carving gouges. Set of 12.
90 Auger bit set in custom stand
91 Pfeil eight piece gouge set in rack
92 Custom made auger and drill box
Comes with contents as seen
93 Various honing blocks
94 Various honing blocks
95 Various honing blocks
96 Various honing blocks
97 Oils, compound, waxes, etc
98 Honing guides
99 Solid brass square pitcher
7 inches tall, 4 inches wide
100 Solid brass trunk hinge latch
101 Three Stanley Shurform sanders
102 Two antique wood clamps
103 Two Jorgensen wood clamps
104 Custom beater mallet
105 Two antique wood clamps
106 Two vintage pipe wrenches
107 Vtg farrier tools
108 Record Marples no. 4 wood plane
Made in England
109 Clifton 420 shoulder plane
110 Clifton 410 shoulder plane
111 Lie-Nielsen No. 4 1/2 wood smooth plane
112 Millers Falls wood plane
9 inches long
113 Two Woodcraft wood clamps
114 Four corner clamps
115 Two Bessey corner clamps
116 Antique hatchet head with newer handle
117 Old CW hatchet head with handle
118 Two antique saw tooth set tools
119 Two workbench material clamps
120 Two Bessey German clamps. 6 inch
121 Custom made project lifts
15 inches long 2 1/2 inches tall
121a BRING HELP--No Assistance Available
122 Four mini Irwin and spring clamps
123 Two Wolfcraft C clamps
124 Lie-Nielsen Adjustable mouth block plane
125 Lie Nielsen 102 Low angle block plane
126 Stanley 90 shoulder plane
127 Clifton 400 shoulder plane
Has custom made wood wedge stop as seen
128 Lie Nielsen 212 Small scraping plane Bronze
129 Stanley CWF plane made in England
130 Lie Nielsen Small chisel plane
131 Lie Nielsen Rabbet block plane
132 Stanley 110 wood plane
133 Stanley 102 wood plane
134 X-Acto, Veritas blade sets
And part of a wood plane
135 Push blocks and custom angle cut jigs
136 Three custom made feather boards
137 Custom made cabinet with shelves
12 inches wide x 7" deep. 19 inches tall.
138 Protractors, templates, graph paper, etc
All the stuff you need to start the project
139 Drawing instruments, thumbtacks, etc
All off the workbench
140 Jinhao fountain pen. 18K gold plated tip
141 Pfeil, Wusthof and pocket knives
142 Pfeil woodworking gouges with divider
143 Pfeil woodworking gouges with divider
144 Pfeil woodworking gouges with divider
145 Custom made box that looks like drawer
14 inches long
146 Custom made seven drawer cabinet
Some drawers are lined with felt. 18 inches wide 12 inches deep 20 inches tall. One drawer has built-in pliers.
147 Two Bessey Germany wood clamps. 40 inch
148 Two Pony face frame clamps
149 Two Bessey Germany wood clamps. 6 inch.
150 Two Bessey Germany wood clamps 6 inch
151 Two Bessey Germany wood clamps. 6 inch
152 Two Bessey single spindle edge clamps
Made in Germany
153 Two Bessey single spindle edge clamps
Made in Germany
154 Four Record face frame clamps
Made in England
155 Four Record C clamps. 2 1/2 inch.
Made in England
156 Two 4 inch clamps made in west Germany
I believe they are old Besseys, but no markings
157 Five bar clamps. 11 inch Made in Germany
Couldn’t figure out a manufacturer. No markings.
158 Two Bessey Germany clamps. 12 inch
159 Two Bessey Germany clamps. 12 inch
160 Two Bessey Germany clamps. 12 inch
161 Two Bessey 12 inch wood clamps
162 Two Bessey 12 inch wood clamps
163 Record Marples 16 inch wood clamp
164 Two 16 inch wood clamps
165 Two 4 inch C clamps
166 Two Record 6 inch C clamps
167 Two 8 inch adjustable C clamps
168 Veritas bench dog push clamp
169 Stanley adjustable dial 24 inch level
170 Old wood and brass brace
14 inches long. May be a Marples, but I can’t find any markings.
171 Stanley 965N ratchet brace
172 Custom made screwdriver rack
Comes as seen with all the Stanley, screwdrivers and others. 17 inches wide. Mounts on the pegboard.
173 Antique wood scribe
174 Marples wood scribe
175 Old wood scribe
Can’t make out the emblem for manufacture
176 Really Old wood scribe
177 Lu Ban wood scribe
178 Crown Tool wood scribe
178a BRING HELP--No Assistance Available
179 Three fancy belt buckles
Square one is missing the point for the belt
180 Russell No. 1 and Sergeant squares
181 Bluespruce Toolworks dovetail saw
Blade is 12 inches long
182 Three squares. Crown Tool, etc..
183 Two 8 inch bar clamps made in W. Germany
No markings, but may be old Besseys
184 Two Irwin quick grip clamps
185 Drafting and speed squares
186 Two coping saws
187 Stanley adjustable bevel square
188 Crown Tool and other mini adjustable squares
189 Shinwa 780 adjustable square
190 Fabrik Marke Garantie chisels
Made in Germany. Seit 1858
191 Robert Sorby chisels
192 Marples chisels
193 Two Bluegrass and three unmarked chisels
194 Two Hudson Forge, etc chisels
195 Two WoodRiver and two Narex chisels
196 Lie-Nielsen chisels, etc
197 Various chisels by random makers
198 Crown Tool short chisel set
199 Millers Falls wood gouges and custom case
Comes with a random gouge
200 Various calipers, angle gauges, etc.
201 Magnifying glasses, jewelers loop, mirrors
202 Contour gauge, DelVe and mini squares
203 WoodRiver weighted squares set
204 Starrett square, Brown and Sharpe caliper
205 Compasses, etc.
206 RARE Lufkin 2062 folding level ruler
Really good shape look it up
207 Stanley double folding rulers 61 and 53
208 Stanley and Empire levels
Empire is 24 inch, 12 inch, and torpedo. Stanley is 36 inch.
209 Awls, nail sets, tweezers, etc
210 Old Crown Cutlery hammer with storage in handle
211 Specialty scissors
Can’t find manufacturer name
212 Four-drawer base cabinet with top
20 x 25. 31 inches tall.
213 6 gallon shop vac with attachments
214 Copper colored stand project light
51 inches tall. Works.
215 Uncle Sam Army recruiting poster framed
25 x 31
216 Navy recruiting poster
23 x 35
217 US Marines Iwo Jima US treasury poster
25 x 31
218 U.S. Marines recruiting poster
24 x 31. Poster only no frame.
219 Fully adjustable auxiliary table jig
24 x 12
220 Porter Cable 7 1/4 inch circular saw with case
221 Dewalt plate joiner with case
222 Porter Cable biscuits. Three sizes.
Not all are full as seen
223 Collection of files. Nicholson, etc..
224 Files in custom made divided tray
Nicholson, etc.
225 Green granite cutting board
18 x 12
225a BRING HELP--No Assistance Available
226 Various honing blocks
227 Brass plates and copper color metal
For projects
228 Leather rubs and spare leather
229 Various honing blocks
230 Tackle box full of hardware
231 Some of Ben’s project pieces and templates
232 Old wood drawer
233 Snell and Atherton heel shave. OED 7
234 Stanley No. 51 spokeshave
235 Record No. A151 All steel spoke shave
236 Record No. A151 All steel spoke shave
237 Specialty hand saws and saw blades
238 Precision compasses
Starrett and Alvin, etc
239 Marples wood bow saw
Comes with spare blades. 12 inch blades. 23 inches total.
240 pfeil straight blade draw knife
4 1/4 inch blade. Had it mislabeled.
241 Old Stanley, Plumb, and Oak Leaf hammers
242 Two Stanley cross pein Warrington hammers
Made in England
243 Tim Allen Signature hammer
244 Specialty hammers
245 Custom made five drawer cabinet
23 inches wide by 9 deep. 10 inches tall. Couple of the drawers have specialty layouts in them.
246 Three lightly used 10 inch saw blades
All the blades are in the wrong packages
247 Collection of goodies
Forstner bit, tape measures, plumb bob, etc
248 Chisel moulding scrapers. Maybe
No manufacturer name on the pieces. Not entirely sure what it’s for.
249 A bunch more goodies
250 Pro Prep and Clay scrapers with blades
251 Two Bench Dog feather boards
252 Craftsman Allen wrench sets. Std and metric
253 Lie-Nielsen blade clamp, LN blade, etc
254 Bosch jigsaw blades
255 Ryobi detail sander
256 Dewalt random orbit sander
257 Specialty scrapers for rabbets, etc
258 Lufkin radius gauge set
259 Lufkin small hole gauge set
260 Straight edges and shop broom
261 Woven laundry basket or trash can
22 inches tall
262 Premier pencil sharpener
263 Large lot of router bits in custom blocks
264 Porter Cable router template guides
265 Material lifts, saw gauge, level, etc
Random router parts and others
266 Old wood box
36 inches wide 9 inches deep
267 Jig for cabinet shelf holes
268 Vaughan hatchet
269 Rubber shop work mat
60 x 24
270 12/3 wire
Maybe 100 feet left on the roll
271 Cast iron wall decor
19 inches wide. It's probably older than it looks
272 Extension cord. Probably 50 feet.
273 Heavy duty back brace
Didn't see a size
273a BRING HELP--No Assistance Available
274 Cast iron doors scrolls, shelf brackets, etc
275 Dremel and bits in case rack
276 Custom made mini wall shelf
8 1/2 wide by 7 deep. 19 inches tall.
277 Custom made mini wall shelf
9 1/2 wide by 7 1/2 deep. 24 inches tall.
278 Thermometer barometer
20 inches tall. Housing is plastic.
279 Two custom-made shelf pieces
14 x 10
280 Custom made adjustable height wall shelf
10 inches wide, 26 inches tall
281 Custom made wood tray
18 x 7 1/2
282 Nitrile gloves
Three full boxes, and one partial.
283 Sandpaper, abrasive rolls, steel wool, etc
284 Large lot of 5 inch sanding discs
285 Rockler and Accuride drawer glides
286 New 13 inch surface planer blades
287 Metal long match holder
11 inches tall
288 Old antique cast-iron Harder Mfg. something
It’s 30 inches wide 7 inches tall. Weighs 10 pounds or so. Cobleskill, New York, Patent of June 27, 1899. Not sure what it’s for or what it was off of. It’s a cool old piece. Look it up.
289 Leather pieces and strips
290 Two navigating compasses
291 Bunch of old keys
292 Old advertising and wood pieces
293 Conch shell, reducing soap, Harley towels, etc
294 Old drawer like the apothecary drawers
12 inches deep 7 inches tall
295 Leigh dovetail jig
24 inch usable space. 31 inches total.
296 Festool plunge router
Comes with case and a bunch of extra parts as seen
297 Stanley short cut finish saw with extra blade
298 Two Japanese pull saws
Both about 22 inches long
299 Burnishers. Two triangular.
One is Schutz Ott
300 Lie-Nielsen No. 66 bronze beading tool
No blade
301 Crown tool wood mallet
10 inches long
302 Two wood mallets
Both roughly 11 inches long
303 Two wood carving mallets
Both about 10 inches long
304 Calvo solid brass and wood mallet
8 inches long
305 Simmons 8 inch draw knife
306 A.J. Wilkenson adjustable 8 inch draw knife
307 Billings and Spencer No. 4 screwdriver
Very old. Multi blade. Slides out to switch blades and in to lock other blades out of the way.
308 Really old adjustable pipe wrench
Just can’t make out any of the markings. 6 1/2 inches long.
309 Outside and inside calipers
Starrett and others
310 Wood plane with adjustable base
9 1/4 inches long
311 Rabbet plane. 1 inch
Nine and three-quarter inches long. Can’t make out name on blade but it says it’s from Germany.
312 Ohio Tool Company number 47 plane
9 1/2 inches long
313 Wood plane with adjustable base
Nine and a quarter inches long
314 Wood plane. 50 mm.
315 Fully adjustable wood plane
316 Wood plane. 14 inches long
317 Wood plane. 8 inches long
318 Coopers curved wood plane
14 inches long
319 Coopers curved wood plane
13 inches long
320 Wood plane with side guides
15 1/2 inches long
321 Cast iron adjustable picture framing clamp
322 Robert Sorby lathe tools
323 Craftsman lathe tools
324 Lathe tools
325 Stanley No. 45 plane with auxiliary blades
15. Other blades besides the one that’s in it
326 Stanley 80-702 bench vise
Has wood attached to flanges as seen
327 Bose Wave Radio with remote
328 1945 Popular Mechanics ad. Framed
12 x 9
328a BRING HELP--No Assistance Available
329 Replogle 12 inch Starlight globe
330 Paul Brennan handpainted duck feathers
1976. 10 x 6. Painted on board
331 Profile plane
332 Profile plane
333 Profile plane
334 Profile plane
335 Profile plane
336 Profile plane
337 Profile plane
338 Profile plane
339 Profile plane
340 Profile plane
341 Profile plane
342 Profile plane
343 Profile plane
344 Profile plane
345 Profile plane. Two blade.
346 Profile plane
347 Mortise chisels and slicks
348 Bunch of files on wall rack
Bring a screwdriver and you can have the rack
349 Large chisels and punches
350 Sanders and bits to use with drill press
351 Tenon, dowel and plug cutters
352 Antique threaded rods for something
16 inches long. One and a half inch diameter on threaded part. Not sure what these were for.
353 Antique Reeves Pulley Co. 8 inch something.
Columbus Indiana. Center wedges come out.
354 Antique wood 12 inch wheel or something
It looks like the center hub for some thing, but don’t know what it’s for. May be for old hit and miss drive belt. You figure it out
355 Four antique wood clamps with wood spindles
356 Profile plane
357 Profile plane
358 Profile plane
359 Profile plane
360 Profile plane
361 Profile plane
362 Profile plane
363 Profile plane. Two blade.
364 Profile plane. Two blade.
365 Profile plane
366 Profile plane
367 Profile plane
368 Profile plane
369 Profile plane
370 Wood block plane
371 Random this and that
372 Carved wood pieces
373 Three clamps
374 Two wood clamps
375 Two Makita drills, chargers and cases
Enough charge left in both batteries that they both work. As seen.
376 Milwaukee drill, two batteries and charger
Enough charge left in battery that it worked. As seen.
377 Old brass and copper decorative pieces
378 Trammel points
379 Two new chisel or wrench roll bags
380 Tote full of mostly new cabinet hardware
Hinges, corners, casters, you name it
381 Knobs, acid brushes, paint brushes, etc.
382 Two probably new auger bits
383 Project wood, quarter inch ply, old spindles, etc.
Dowel rods Everything in under-stairs storage
384 Molding and molding pieces in bucket
385 Shelf and contents
36 x 18. 72 inches tall. Dewalt case is empty.
386 White foam board
It's about 1/4 thick
387 Contents on pegboard
Wood on floor is not part of this
401 Wood plane print
18 x 18
402 Wood plane print
18 x 18
403 Wood plane print
18 x 18
404 Wood plane print
18 x 18
405 Wood plane print
18" x 18”
406 Wood plane print
18 x 18
407 Wood plane print
18 x 18
408 Wood plane print
18 x 18
409 Wood plane print
18 x 18
410 Wood plane print
18 x 18