Manufactured by Isaac M. Bauman, Wallenstein Wood Splitters, powered by a Briggs & Stratton 1450 305cc motor, 14.5 ft-lbs torque, 20 ton,pull start, good compression, tested and splits wood., photos of log being split.

Delta 12" portable planer Model #22-5402 on aluminum rolling stand, planer tested cuts well, good used condition.

National Power Tools 4" Jointer on metal stand, powered by a Leland 1/2 HP Electric Motor, Type R35, made in St. Thomas Ontario, tested and working, good used condition. (Dolly not included)

Makita 305mm portable metal cut-off saw Model: 2412N, tested and working but cord needs to be replaced.

Delta combination 4" belt & 6" disc sander, Model 31-460C, needs the safety toggle for the on/off switch but tested and working.

A Mastercraft 13" drill press, Model 55-5911-2, tested and in good working condition.

Older metal two door Champion Spark Plugs cabinet, can be wall mounted, some rust along bottom as photographed, comes with keys.

Lincoln AC-225-S arc welder, comes on a metal rolling stand with two welding helmets, Hobart Stick Electrodes, runs on 220, not tested, rusty.

A Beach 2 piece Rolling Machinist Chest, Smith Falls, Ontario, comes with several hand tools, wrenches, fasteners, saw blades, driver bits, grinding tools, and many other machine shop tools, as photographed, along with a key, rusty at back.

Including a tray full of drill bits, hand powered and power auger bits, up to 2", as photographed.

Including a Wissota 7" sickle cone grinding wheel, flat files, chain saw files, stone chisels, cold chisels, ball peen hammer, and small stone hammers, as photographed, some old and some antique.

Selection of Phillips, Robertson, and slot screwdrivers, tin snips, needle nose, side cutters, adjustable and pipe wrenches, as photographed.

John Deere 160 lawn tractor with 38" cut, powered by a Kawaski engine FB 460V, started and tested, has been stored for over a year, runs well, cuts grass, steel deck with no holes, bogey wheels are in good shape, has a mulch guard, rubber on tires has average wear, needs a new battery, seat cover is torn, will need to be boosted to start for loading.

John Deere 6 x 4 Gator, with electric dump box, 356 hours of operation, 2004 Model purchased new in 2005, heavy duty tow hitch, after market wind screen added, very good rubber on tires, drives well, dump box works well, the front cowl is cracked where bolted down as shown in pics, stored for over a year indoors, needs new battery, needs boost to start for loading, PLEASE NOTE: THE BUYER'S PREMIUM FOR THIS LOT WILL BE CAPPED AT $1,000.

John Deere L110 lawn tractor with 42: Edge Cut System, Kohler Commander 17.5 engine, average wear or tires, has 261 hours of operation, started and tested, runs well and cuts grass, steel deck, bogey wheels are good, seat cover is torn, stored for over a year indoors, needs new battery, needs boost to start for loading.

Painted with John Deere logo and colours, crack in seat, sturdy, 12"Diam top x 21"H.

Remington Power Hammer in box, Motomaster Battery charger, assorted socket wrenches and sockets, nuts and bolts, etc. as photographed.

For farm machinery, buggies, etc., total of 20, as photographed.

A large selection of Craftsman double-ended wrenches, vintage double-ended open wrenches, tin snips, and pipe wrenches, as photographed.

A Venture - Mountain Tour bike, 18 speed, Dyna Grip, Cionlli seat, good used condition, some rust as photographed.

Six rods with reels, reels by Shimano, Compac, and Heddon, 2 rod tips broken otherwise in good used condition. Total of 6.

John Deere 2305 sub-compact tractor with front end loader, Yanmar 3 cyl 24.1 HP diesel engine, 4 wheel drive, has 809 hours of operation, appears to be a 2005 Model, PTO and rear mounted snow. blower. Tested and started, runs well, PTO works well, very good rubber on tires, hydraulic lines are in very good condition and have no cracks, stocking is still in place, bucket is in very good shape with little wear, older snow blower, customized to allow driver to operate shoot while driving, comes with metal John Deere canopy, not assembled. PLEASE NOTE: THE BUYER'S PREMIUM FOR THIS LOT WILL BE CAPPED AT $1,000.

The Edge Extra 54" C Cutting System Model No. M054CB095368, fits the John Deere 2305 Tractor, good used condition.

Good condition, some surface scratches as expected, 30".