LAZ TOOL & MANUFACTURING - ONLINE AUCTION
LAZ TOOL & MANUFACTURING - ONLINE AUCTION
James G. Murphy Co. | SNOHOMISH, WA 98290
Date(s) :  11/5/2024 - 11/12/2024
Buyer Premium :  13%


Online Only Auction
Start Date: 10:00 AM | Tuesday - November 5 End Date: 10:00 AM | Tuesday - November 12
CNC Machine & Fabrication Shop
1 GRACO 190ES
AIRLESS PAINT SPRAYER, 115V
2 BADBOY
SANDBLAST POT
3 DYNABRADE NF1
NITROFILE, PNEUMATIC ABRASIVE BELT TOOL (UNUSED)
4 RTS PRESTIGE
PNEUMATIC PENCIL GRINDER
5 MARSON PHT-3
PNEUMATIC RIVETER
6 ASTRO POWER AR-16
PNEUMATIC POLISHER
7 LOT, (2) PNEUMATIC D/A SANDERS
8 LOT, ASSORTED PNEUMATIC TOOLS
9 LOT, (2) MULTIMETERS
10 6" BENCH VISE
11 EXTECH
COOLANT REFRACTOMETER
12 DEMAGNETIZER (NO INFO)
13 LOT, ASSORTED C-CLAMPS
14 LOT, ASSORTED END WRENCHES
15 LOT, ASSORTED ALLEN WRENCHES
16 LOT, ASSORTED HAND TOOLS
17 LOT, ASSORTED DEBURRING TOOLS
18 LOT, ASSORTED AIR BLOWERS
19 OILY RAG SAFETY CAN
20 OILY RAG SAFETY CAN
21 TRINERS
ALL STEEL ANTIQUE PARCEL POST SCALE
22 FAIRBANKS
500 LB BALANCE SCALE
23 BANDING CART W/TOOLS
26 BRIDGEPORT EZ-TRAK SX
2 HP CNC VERTICAL MILLING MACHINE, 48" X 9" TABLE, POWER DRAW BAR, BPC2M CONTROLS, 200/208/230/460V, 3 PHASE SERIAL NUMBER: BR261778E
27 BRIDGEPORT
1 HP MILLING MACHINE, 36" X 9" POWER FEED TABLE, ENCO PLATINUM PLUS DRO, 200/230/380/460V, 3 PHASE SERIAL NUMBER: BR107487
28 BRIDGEPORT
1 HP VERTICAL MILLING MACHINE, 36" X 9" POWER FEED TABLE, BAUSCH & LOMB ACU-RITE DRO, 208/220/380/460V, 3 PHASE SERIAL NUMBER: BR107704
29 ENCO 100-1599
2 HP VERTICAL MILLING MACHINE, 49" X 9" POWER FEED TABLE, ENCO PLATINUM PLUS DRO, 200/380/440V, 3 PHASE SERIAL NUMBER: 440770
30 HARDINGE HC
TOOL ROOM LATHE, 13" SWING, 33" TABLE, TOOL POST HOLDER, 5C, 220V, 3 PHASE SERIAL NUMBER: HC4964T
31 ENCO 110-1340
GAP BED LATHE, 6" 3-JAW CHUCK, TOOL POST, STEADY REST, 13" SWING, 53" TABLE W/ASSORTED ACCESSORIES, 220V, SINGLE PHASE SERIAL NUMBER: 930432
32 GRAZIANO SAG12
12" SWING, 32" TABLE, ASSORTED ACCESSORIES, 220V, 3 PHASE (NEEDS REPAIR, SPINDLE DOES NOT TURN) SERIAL NUMBER: N/A
33A 2012 HAAS VF5SS
CNC VERTICAL MACHINING CENTER, 24-ATC 60" X 30" TABLE, JORGENSON CHIP CONVEYOR, 195-260V, 3 PHASE, HOUR METER READS: 5,573 (REQUIRED FOR REMOVAL) SERIAL NUMBER: 1091808
33B HAAS
4TH AXIS ROTARY INDEXER W/SERVO CONTROLLER (NO INFO)
34 MAZAK FJV-25
CNC VERTICAL MACHINING CENTER, 21-ATC, 50" X 24" TABLE, CHIP CONVEYOR, MAZATROL M-PLUS CONTROLS, 230V, 3 PHASE (SPARE UNUSED WAY & SPINDLE, RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 126372
35A CINCINNATI MILACRON ARROW 750
CNC VERTICAL MACHINING CENTER, 37" X 20" TABLE, 21-ATC, NC-9-BK 4TH AXIS, ACRAMATIC 2100 CONTROLS, 208/230/380/415/460V, 3 PHASE (RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 7043A00950388
35B CINCINNATI MILACRON ARROW 750
CNC VERTICAL MACHINING CENTER, 37" X 20" TABLE, 21-ATC, ACRAMATIC 2100 CONTROLS, 208/230/380/415/460V, 3 PHASE (PARTS MACHINE, DOES NOT OPERATE, RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 7043A00950424
36 OKUMA MC-5 VA
CNC VERTICAL MACHINING CENTER, 51" X 20" TABLE, 20-ATC, TOKYO, KEIKI HIGH PRESSURE COOLANT, OSP5000 M-G CONTROLS, 220/440V, 3 PHASE (RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 0559
37 OKK PCV-50
CNC VERTICAL MACHINING CENTER, 36" X 20" TABLE, 20-ATC, OKK PNC CONTROLS, 200/220V, 3 PHASE (NEEDS REPAIR, LOST PARAMETERS, RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 496
38 2007 TRAK TRL 1630SX
CNC TOOL ROOM LATHE, 16" SWING, 30" BED, TOOL POST HOLDER, 2.12" PROTO TRAK SLX CONTROLS, 220V, 3 PHASE (RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 71CH15253
39 MAZAK QUICK TURN 15
CNC LATHE, 11.8" SWING, 20" CAPACITY, 8-TOOL TURRET, SPACE SAVER 12.65 AUTOMATIC BAR FEEDER, MAYFRAN CHIP CONVEYOR, MAZATROL T32-2 CONTROLS, 230/460V, 3 PHASE (RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 102954
40 MAZAK QUICK TURN 20 UNIVERSAL
CNC LATHE, 15.7" SWING, 19.7" LENGTH CAPACITY, 8-TOOL TURRET, MAZATROL T-1 CONTROLS, 230/460V, 3 PHASE (NEEDS REPAIR, LOST PARAMETERS, RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: N/A
41 1998 AMADA VIPROS255
20-TON TURRET PUNCH PRESS, 31-STATION TURRET, 100" TABLE, 50" THROAT, SBC CHILLER FANUC SERIES 18P CONTROLS, 460V, 3 PHASE (RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: AVP55083
42 LOT, APPROX (150) ASSORTED PUNCH & DIE SETS ON
THESE SHELVES W/SHELVES
43 LOT, APPROX (150) ASSORTED PUNCH & DIE SETS ON
THESE SHELVES W/SHELVES
44 LOT, APPROX (36) ASSORTED PUNCH & DIE SETS ON
THESE SHELVES W/SHELVES
45 LOT, ASSORTED PUNCH & DIE COMPONENTS ON THIS
BENCH W/BENCH
46 LOT, ASSORTED PUNCH & DIE COMPONENTS ON THESE
SHELVES
47 1997 AMADA RG50
50-TON CNC PRESS BRAKE, 78.8" TABLE LENGTH, 3.94" STROKE, 230/460V, 3 PHASE (RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 509290
48 LOT, ASSORTED PRESS BRAKE DIES ON THESE SHELVES
W/SHELVES
49 LOT, ASSORTED PRESS BRAKE DIES ON THESE SHELVES
W/SHELVES
50 LOT, ASSORTED PRESS BRAKE DIES IN THIS SECTION
W/RACK
51 WYSONG 1252
52" 12 GAUGE MECHANICAL SHEAR, BACK GAGE, 220V, 3 PHASE SERIAL NUMBER: P13-541
52 DO-ALL C-5A
9" X 12" HORIZONTAL BANDSAW, 60" ROLLER INFEED, PNEUMATIC HOLD DOWN, 230/460V, 3 PHASE (CUSTOMER RESPONSIBLE FOR DISMANTLING & DISCONNECTING ELECTRICAL) SERIAL NUMBER: 31476517
53 DO-ALL 2013-20
13" VERTICAL BANDSAW, 20" THROAT, BLADE WELDER, 220V, 3 PHASE W/ASSORTED SPARE BLADES (REMOVAL BY APPOINTMENT ONLY) SERIAL NUMBER: 377-79280
54A MAX 10NS
10" CUT-OFF SAW W/PNEUMATIC HOLD DOWN & ASSORTED SPARE BLADES, 208/230/460V, 3 PHASE SERIAL NUMBER: 176
54B DO-ALL
2-DOOR SUPPLY CABINET W/CONTENTS
55 SCIAKY PMCO.2ST-100-36-5
SPOT WELDER, 44" THROAT, FERRANTI SCIAKY CONTROLS, 440V, 3 PHASE (POWER DISCONNECTS AT SHUT-OFF, RIGGER REQUIRED FOR REMOVAL) SERIAL NUMBER: 8877
56A HAEGER HP6B
6-TON HARDWARE INSERTION PRESS, 220V, 3 PHASE SERIAL NUMBER: 203
56B LOT, ASSORTED HARDWARE INSERTS
57 SUNNEN MBB-1600
PRECISION HONING MACHINE W/ACCESSORIES, 115V SERIAL NUMBER: 40280
58 CINCINNATI 16 ROYAL
16" VARIABLE SPEED DRILL PRESS, 220/440V, 3 PHASE
59 ALLEN
6-SPINDLE GANG DRILL, 220/440V, 3 PHASE
60 ALLEN
5-SPINDLE GANG DRILL, 220/440V, 3 PHASE
61 CINCINNATI 18 ROYAL
2-SPINDLE DRILL PRESS, 220/440V, 3 PHASE SERIAL NUMBER: N/A
62 BALDOR 1021W
1.5 HP PEDESTAL GRINDER, 208/230/460V, 3 PHASE SERIAL NUMBER: F379
63 DELTA JE23505-M
CARBIDE TOOL GRINDER
64 BURR KING 760
3-WHEEL BELT GRINDER, 110V
65 SQUARE WHEEL GRINDER, 110V
66 BURLINGTON SANDERS TIMESAVER
24" X 48" BELT SANDER, 230V, 3 PHASE W/ASSORTED BELTS SERIAL NUMBER: N/A
67 PEDESTAL MOUNTED BUFFER (NO INFO)
68 BALDOR 333B
3/4 HP BUFFER, 115/230V
69 PEDESTAL MOUNTED GRINDER/BUFFER (NO INFO)
70 KO LEE BA960BB
TOOL GRINDER, 230V, 3 PHASE SERIAL NUMBER: 8907-1165
71 HARIG SUPER 618
SURFACE GRINDER, 18" X 6" MAG CHUCK, 230V, 3 PHASE SERIAL NUMBER: N/A
72 BOYAR SCHULTZ
SURFACE GRINDER, 12" X 6" MAG CHUCK W/CART, 230V, 3 PHASE
73 TRINCO DRY BLAST
24" SANDBLAST CABINET W/DUST COLLECTOR
74 ELECTRO ARC 2S
METAL DISINTEGRATOR, 440V, 3 PHASE SERIAL NUMBER: 2994
75 ALMCO V-3
VIBRATORY DEBURRING MACHINE, 230V, 3 PHASE SERIAL NUMBER: G0396
76 BURR BENCH
VIBRATORY DEBURRING MACHINE, 120V SERIAL NUMBER: N/A
77 LOT, ASSORTED DEBURRING STONES IN THIS SECTION
78 COOLEY U23
HEAT TREATING OVEN W/CONTROLS SERIAL NUMBER: 9871
79 BRIDGEPORT
DUAL HEAD TRACER MILL, 60" X 9" TABLE, (1) 3 HP HEAD, (1) 2 HP HEAD, TRUE-TRACE MOD 1110 TRACER, 230V, 3 PHASE SERIAL NUMBER: N/A
80 BRIDGEPORT
5 HP TRACER MILL, 60" X 9" TABLE, TRUE-TRACE MOD 1100 TRACER, 230V, 3 PHASE SERIAL NUMBER: N/A
81 HYSTER H50XL
4,400 LB CUSHION TIRE PROPANE FORKLIFT, 3-STAGE MAST, SIDE SHIFT, HOUR METER READS: 2,518 (MUST STAY UNTIL MONDAY, NOVEMBER 25TH) SERIAL NUMBER: A177B7514E
82 LOT, (2) 55-GALLON DUST COLLECTORS, 230V, 3 PHASE
83 KRW
VALVE GRINDER SERIAL NUMBER: 1456
84 LOT, (2) DRO'S, (1) ANILAM WIZARD & (1) MITUTOYO
ALC3705
85 KELLER PRODUCTS ECO 9.5
OIL SKIMMER
86 WELDON NO. 8
SHARPENING FIXTURE
87 VACUUM PUMP, 115V
88 APPROX 45-GAL BLASER 2000CF WATER MUSCABLE METAL
WORKING FLUID W/HAND PUMP
89 36" X 22" X 2" ALUMINUM BASE PLATE W/CART
90 18" X 4-1/2" LAPPING PLATE
91 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
92 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
93 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
94 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
95 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
96 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
97 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
98 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
99 KURT
6" DUAL STATION MACHINISTS VISE W/HANDLE
100 KURT D688
6" MACHINISTS VISE W/HANDLE
101 KURT D688
6" MACHINISTS VISE W/HANDLE
102 KURT D688
6" MACHINISTS VISE W/HANDLE
103 KURT C675
6" MACHINISTS VISE W/HANDLE
104 KURT C675
6" MACHINISTS VISE W/HANDLE
105 6" MACHINISTS VISE W/HANDLE
106 6" MACHINISTS VISE W/HANDLE
107 6" MACHINISTS VISE W/HANDLE
108 6" MACHINISTS VISE W/HANDLE
109 6" MACHINISTS VISE W/HANDLE
110 6" MACHINISTS VISE W/HANDLE
111 6" MACHINISTS VISE W/HANDLE
112 LOT, ASSORTED KURT VISE PARTS ON THIS CART W/CART
113 6" AIR VISE
114 LOT, (2) ASSORTED VISES
115A LOT, ASSORTED SNAP JAWS
115B LOT, ASSORTED SHOP BUILT DOVETAIL VISE JAWS
116 6" X 6" MAGNETIC SINE PLATE
117 12" X 10" T-SLOT SINE PLATE
118 10" X 6" X 6" ANGLE BLOCK
119 8" X 6" X 6" ANGLE BLOCK
120 6" X 5" X 4-1/2" ANGLE BLOCK
121 7" X 6" X 8" ANGLE BLOCK
122A 6" X 6" X 6" ANGLE BLOCK
122B LOT, (3) SHOP BUILT ANGLE BLOCKS
123 RENISHAW 40-2
OPTICAL PROBE SERIAL NUMBER: 54X608
124 LOT, (24) ASSORTED CAT40 TOOL HOLDERS
125 LOT, (24) ASSORTED CAT40 TOOL HOLDERS
126 LOT, (24) ASSORTED CAT40 TOOL HOLDERS
127 LOT, (24) ASSORTED CAT40 TOOL HOLDERS
128 LOT, (24) ASSORTED CAT40 TOOL HOLDERS
129 CAT40
TOOL BENCH
130 LOT, (24) ASSORTED CAT40 TOOL HOLDERS
131 LOT, (26) ASSORTED CAT40 TOOL HOLDERS
132 CAT40
TOOL CART
133 LOT, (28) CAT50 TOOL HOLDERS
134 LOT, (28) CAT50 TOOL HOLDERS
135 8' CAT50 TOOL BENCH
136A LOT, (24) CAT50 TOOL HOLDERS W/CART
136B SHOP BUILT CAT50 SET-UP STAND
137 PROCUNIER STYLE E
SIZE 2 TAPPING HEAD
138 PROCUNIER MODEL 1, SERIES 11002
TAPPING HEAD
139 PROCUNIER SIZE 1, STYLE E
TAPPING HEAD
140 PROCUNIER SIZE 1, STYLE E
TAPPING HEAD
141 PROCUNIER SIZE 1, STYLE E
TAPPING HEAD
142 LOT, ASSORTED DRILL CHUCKS IN THIS BIN
143 LOT, APPROX (75) R8 COLLETS
144 LOT, APPROX (88) 5C COLLETS W/RACK
145 LOT, APPROX (57) 3J COLLETS
146 LOT, APPROX (100) ASSORTED COLLETS
147 LOT, ASSORTED COLLETS
148 LOT, APPROX (100) HARDINGEE CHUCKER COLLETS
149 LOT, ASSORTED LARGE TAPS
150 LOT, ASSORTED TAPS (UNUSED)
151 TAP INDEX W/ASSORTED MACHINE SCREW TAPS
152 TAP INDEX W/ASSORTED FRACTIONAL TAPS
153 LOT, ASSORTED TAPS IN THESE (2) BINS
154 LOT, ASSORTED TAPS
155 LOT, ASSORTED DRILL BITS (UNUSED)
156 DRILL INDEX W/ASSORTED STUB NUMBER DRILL BITS
157 DRILL INDEX W/ASSORTED STUB FRACTIONAL DRILL BITS
158 DRILL INDEX W/ASSORTED STUB LETTER DRILL BITS
159 DRILL INDEX W/ASSORTED JOBBER NUMBERED DRILL BITS
160 DRILL INDEX W/ASSORTED JOBBER FRACTIONAL DRILL
BITS
161 DRILL INDEX W/ASSORTED JOBBER LETTER DRILL BITS
162 DRILL INDEX W/ASSORTED METRIC DRILL BITS
163 DRILL INDEX W/ASSORTED JOBBER DRILL BITS
164 DRILL INDEX W/ASSORTED HIGH SPIRAL DRILL BITS
165 LOT, (3) DRILL INDEXES W/ASSORTED DRILL BITS &
TAPS
166 LOT, ASSORTED DRILL BITS IN THIS BIN
167 LOT, ASSORTED DRILL BITS IN THIS BIN
168 LOT, ASSORTED HELI COIL COMPONENTS IN THIS BIN
169 REAMER INDEX W/ASSORTED REAMERS
170 LOT, ASSORTED REAMERS IN THIS BIN
171 LOT, ASSORTED REAMERS IN THIS BIN
172 LOT, ASSORTED REAMERS IN THIS BIN
173 LOT, ASSORTED INSERT TOOTH CUTTERS
174 LOT, ASSORTED CARBIDE INSERTS (UNUSED)
175 LOT, ASSORTED CARBIDE INSERTS (UNUSED)
176 LOT, ASSORTED CARBIDE INSERTS (USED)
177 LOT, (2) KNURLING TOOLS
178 LOT, (5) ASSORTED BORING HEADS
179 LOT, ASSORTED END MILLS (UNUSED)
180 LOT, ASSORTED GROOVE CUTTERS & ASSORTED TOOLING
181 LOT, ASSORTED END MILLS ON THIS SHELF
182 LOT, ASSORTED END MILLS ON THIS SHELF
183 LOT, ASSORTED END MILLS ON THIS SHELF
184 LOT, ASSORTED END MILLS ON THIS SHELF
185 LOT, ASSORTED END MILLS ON THIS SHELF
186 LOT, ASSORTED DRILL BITS ON THIS SHELF
187 LOT, ASSORTED HORIZONTAL CUTTERS
188 LOT, ASSORTED TOOLING IN THIS SECTION
189 LOT, ASSORTED TOOLING IN THIS SECTION
190 LOT, ASSORTED BROACH COMPONENTS
191 LOT, ASSORTED INDEXABLE LATHE TOOLING
192 2-DOOR METAL CABINET W/ASSORTED TOOLING
193 2-DOOR METAL CABINET W/ASSORTED TOOLING &
SUPPLIES
194 LOT, ASSORTED VISE JAWS ON THESE SHELVES
195 LOT, ASSORTED HOLD DOWN COMPONENTS ON THIS SHELF
196 36" METAL CABINET W/CONTENTS
201 BROWN & SHARPE TESA HITE 00790042
DIGITAL HEIGHT GAGE SERIAL NUMBER: 6H21501
202 MITUTOYO LINEAR HEIGHT LITE 350
DIGITAL HEIGHT GAGE (MISSING BATTERY COVER) SERIAL NUMBER: 0000004
203 MITUTOYO 515-152
13" HEIGHT MASTER GAGE W/CASE SERIAL NUMBER: 67698
204 BROWN & SHARPE 5851-12
HITE-ICATOR, 12" HEIGHT GAGE W/10" RISER
205 STARRETT NO. 454
18" HEIGHT GAGE
206 MITUTOYO
10" HEIGHT GAGE
207 MITUTOYO
MICROMETER SET W/CASE, INCLUDES: 6" - 7", 7" - 8", 8" - 9", 9" - 10", 10" - 11" & 11" - 12"
208 MICROMETER SET, INCLUDES: 0" - 1", 1" - 2", 2" -
3", 3" - 4", 4" - 5" & 5" - 6" (MISMATCHED)
210 LOT, (4) LARGE STARRETT MICROMETERS, 6" - 20"
(MISSING SOME COMPONENTS)
211 LOT, ASSORTED MICROMETERS
212 LOT, (2) DIAL BORE GAGES (MISSING COMPONENTS)
213 LOT, (2) SUNNEN DIAL BORE GAGES (MISSING
COMPONENTS)
214 MITUTOYO 547-400
DIGIMATIC THICKNESS GAGE
215 LOT, ASSORTED QC GAGES
216 LOT, ASSORTED QC GAGES
217 MITUTOYO CD-12
DIGIMATIC 12" DIGITAL CALIPER
218 MITUTOYO
40" CALIPER
219 MITUTOYO
24" CALIPER
220 KANON
24" CALIPER
221 JONES & LAMSON TC-10
OPTICAL COMPARATOR
222 WILSON 4JL
ROCKWELL HARDNESS TESTER
223 SUNNEN PG-800S
PRECISION HOLE GAGE
224 MITUTOYO DP-1 HS
DIGIMATIC MINI PROCESSOR
225 SUNNEN CF-502
GAGE SETTING FIXTURE
226 MITUTOYO SURFTEST-402
SURFACE ROUGHNESS TESTER
227 SHEFFIELD 1000
VISUAL GAGE
228 LOT, (3) 5" X 3" X 2-3/4" V-BLOCKS
229 PAIR OF 1-2-3 BLOCKS
230 PAIR OF 1-2-3 BLOCKS
231 PAIR OF 1-2-3 BLOCKS
232 PAIR OF 1-2-3 BLOCKS
233 PAIR OF 1-2-3 BLOCKS
234 PAIR OF 1-2-3 BLOCKS
235 PAIR OF 1-2-3 BLOCKS
236 SET OF PIN GAGES, .626" - .750"
237 SET OF PIN GAGES, .251" - .500"
238 DO-ALL
SET OF PIN GAGES, .061" - .250" (MISSING .089" & .090")
239 SET OF PIN GAGES, .061" - 1" (MISSING SOME GAGES)
240 LOT, ASSORTED PIN GAGES (LOCATED NEAR STORE ROOM)
241 LOT, ASSORTED PIN GAGES
242 LOT, ASSORTED PIN GAGES
243 LOT, ASSORTED PIN GAGES
244 LOT, ASSORTED PIN GAGES
246 LOT, ASSORTED PARALLELS
247 LOT, ASSORTED "GO/NO GO" GAGES
248 LOT, ASSORTED "GO/NO GO" GAGES
249 LOT, ASSORTED "GO/NO GO" GAGES
250 LOT, ASSORTED THREAD CHECKERS
251 LOT, ASSORTED THREAD CHECKERS
256 GRANITE SURFACE BLOCK W/BASE, 48" X 36-1/2" X
6-1/4"
257 GRANITE SURFACE BLOCK W/BASE, 36-1/2" X 24-1/4" X
4"
258 GRANITE SURFACE BLOCK W/CART, 36" X 24" X 4"
259 GRANITE SURFACE BLOCK W/BASE, 46" X 16" X 3"
260 GRANITE SURFACE BLOCK W/CART, 24" X 24" X 5"
261 GRANITE SURFACE BLOCK W/CART, 24" X 18" X 4"
262 GRANITE SURFACE BLOCK, 24" X 17" X 3"
263 GRANITE SURFACE BLOCK, 24" X 18" X 3"
264 GRANITE SURFACE BLOCK, 18" X 12" X 3-3/4"
265 GRANITE SURFACE BLOCK, 18" X 12" X 3-3/4"
266 LOT, (2) PRECISION STEPPED GRANITE SURFACE
BLOCKS, 6" X 6" X 6"
276 CUB CADET HEAVY DUTY GT2542
20 HP 42" RIDING MOWER, HYDROSTATIC DRIVE, HOUR METER READS: 269 SERIAL NUMBER: N/A
277 ZENITH
5,500 LB PALLET JACK
278 VERMETTE 512A
500 LB MATERIAL LIFT
279 2-TON PALLET JACK
283 70" X 24" WOOD WORKBENCH
284 48" X 24" WOOD TOP WORKBENCH
285 LOT, (3) 48" SHELVING UNITS
286 60" X 27" STEEL WORKBENCHES
287 60" X 27" STEEL WORKBENCHES
288 LOT, (2) WOOD TABLES
289 LOT, (2) 60" WOOD WORKBENCHES
290 60" X 21" STEEL WORKBENCH
291 26" X 15" STEEL EQUIPMENT STAND
292 LOT, ASSORTED PUNCHES & DIES W/CABINET
293 LOT, ASSORTED HARDWARE & FITTINGS W/SHELVING UNIT
294 48" X 24" SHOP BENCH
301 LOT, ASSORTED SHEET GOODS RACK W/ASSORTED SHEET
METAL
302 LOT, ASSORTED HARDWARE BINS W/CONTENTS
303 MAC TOOLS
30" X 18" POLY SHOP CART
304 36" X 24" STEEL SHP CART
305 LOT, (8) 30" X 16" STEEL SHOP CARTS
306 LOT, (6) 30" X 16" STEEL SHOP CARTS
307 LOT, (6) 30" X 16" STEEL SHOP CARTS
308 LOT, (3) ASSORTED HEAVY STEEL SHOP CARTS
309 LOT, (5) ASSORTED HEAVY STEEL SHOP CARTS
310 LOT, ASSORTED FATIGUE MATS
311 JUSTRITE 28902
2-DRUM SPILL CONTAINMENT
312 JUSTRITE 25452
45-GALLON FLAMMABLES CABINET
313 DUSTVENT 6X4F2
DUST COLLECTOR (CONDITION UNKNOWN)
314 LOT, (2) 68" X 26" MATERIAL RACKS W/CONTENTS
315 LOT, ASSORTED PARTS & SUPPLIES
316 36" X 24" X 42"H 2-DOOR METAL CABINET
317 LOT, ASSORTED METAL STOCK ON THIS RACK
321 LOT, ASSORTED METAL STOCK ON THIS SIDE
322 LOT, ASSORTED METAL STOCK ON THIS SIDE
323 LOT, ASSORTED MACHINABLE METALS IN THIS SECTION
324 LOT, 72" X 24" X 83" SLIDING DOOR METAL CABINET &
36" 2-DOOR METAL CABINET
325 LOT, ASSORTED MACHINE SHOP PARTS & SUPPLIES ON
THESE SHELVES
326 8' X 4' LIGHTED TABLE
327 8' X 4' SHIPPING TABLE W/ASSORTED SHIPPING
SUPPLIES